Article citationsMore>>

V. Aronov, A. F. D’Souza, S. Kalpakjian and I. Shareef, “Interactions among Friction, Wear, and System Stiffness—Part 2: Vibrations Induced by Dry Friction,” ASME Journal of Tribology, Vol. 106, No. 1, 1984, pp. 59-64. http://dx.doi.org/10.1115/1.3260868

has been cited by the following article:

• TITLE: Effect of Orientation and Applied Load on Abrasive Wear Property of Brass 60:40

  AUTHORS: Mohd Shadab Khan, Zahir Hasan, Syed Mohd Farhan

  KEYWORDS: Abrasive Wear; Brass; Grinding Disc; Mass Loss; Orientation

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, January 14, 2014

  ABSTRACT: Wear is a continuous process in which material is degraded with every cycle. Scientists are busy in improving the wear resistance. Approximately 75% failure in components or machine parts is due to wear. The present paper investigates experimentally the effect of orientation and normal load on alloy of copper and zinc, i.e. Brass, and calculates weight loss due to wear. To do so, a multi-orientational pin-on-disc apparatus was designed and fabricated. Experiments were carried out under normal load 05-20 N, speed 2000 rpm. Results show that the with-increasing load weight loss increases at all angular positions. The loss in weight is maximum at zero degree (horizontal position) and minimum at ninety degree (vertical position) for a particular load. Maximum wear occurs when the test specimen is held at 0° angle and minimum wear occurs when the specimen is held at 90° angle for given applied load. The circumferential distance travel is constant for all positions and for all loads but still mass loss varies.