Article citationsMore>>

Z. Yang and U. Welzel, “Microstructure-Microhardness Relation of Nanostructured Ni Produced by High-Pressure Torsion,” Materials Letters, Vol. 59, No. 27, 2005, pp. 3406-3409. http://dx.doi.org/10.1016/j.matlet.2005.05.077

has been cited by the following article:

• TITLE: Finite Element Analysis of the Groove Pressing of Aluminum Alloy

  AUTHORS: Mehdi Shaban Ghazani, Akbar Vajd

  KEYWORDS: Finite Element Simulation; Constrained Groove Pressing; Deformation Inhomogeneity

  JOURNAL NAME: Modeling and Numerical Simulation of Material Science, Vol.4 No.1, January 13, 2014

  ABSTRACT: In this paper, the finite element method was applied to analyze the deformation behavior of Al-1%Mg alloy during constrained groove pressing (CGP). Deformation inhomogeneity was studied in term of plastic strain distribution during deformation. It was found that after first pressing and flattening steps, the plastic strain is inhomogeneous but second pressing and flattening improve deformation distribution considerably. Also the regions between flat and inclined parts of sample receive less shear strain and consequently after four passes the deformation distribution is still inhomogeneous and doesn’t improve remarkably with more deformation steps.