TITLE:
Mechanical Properties of Small Clear Wood Specimens of Pinus patula Planted in Malawi
AUTHORS:
Felix Dalitso Kamala, Hiroki Sakagami, Junji Matsumura
KEYWORDS:
Pinus patula; Modulus of Elasticity; Modulus of Rupture; Malawi; Air-Dry Density; Wood
JOURNAL NAME:
Open Journal of Forestry,
Vol.4 No.1,
January
8,
2014
ABSTRACT: Pinus patula is one of the major exotic species grown in Malawi mainly for saw-timber production. It is native to Mexico. Little has been reported about the mechanical properties of the wood. The objective of this study was to investigate the mechanical properties of Pinus patula in more detail, in order to provide a basis for utilizing this resource. The mechanical properties of small clear wood specimens of Pinus patula were evaluated using 40 cm logs from 1, 3, 5, 7 and 9 m above the ground. Small clear wood specimens were selected and subjected to a bending test in accordance with Japan Industrial Standards (JIS) air-dry conditions. The growth rate did not affect the mechanical properties measured. There were significant correlations at 1% level between air-dry density and Modulus Of Elasticity (MOE) (R = 0.85) and between air-dry density and Modulus Of Rupture (MOR) (R = 0.83). There was also a significant correlation between MOE and MOR at 1% level (R = 0.90). At about 12% moisture content, the tested five Pinus patula families have average MOR and MOE of 105.17 MPa and 10.93 GPa, respectively.