Article citationsMore>>

G. F. Gao, B. Zhao, D. H. Xiang and Q. H. Kong, “Research on the Surface Characteristics in Ultrasonic Grinding Nano-Zirconia Ceramics,” Journal of Materials Processing Technology, Vol. 209, No. 1, 2009, pp. 32-37.
http://dx.doi.org/10.1016/j.jmatprotec.2008.01.061

has been cited by the following article:

• TITLE: Understanding of Ultrasonic Assisted Machining with Diamond Grinding Tool

  AUTHORS: Kyung-Hee Park, Yun-Hyuck Hong, Kyeong-Tae Kim, Seok-Woo Lee, Hon-Zong Choi, Young-Jae Choi

  KEYWORDS: Ultrasonic Vibration; Grinding; Alumina Ceramic; Grinding Forces; Surface Roughness

  JOURNAL NAME: Modern Mechanical Engineering, Vol.4 No.1, December 30, 2013

  ABSTRACT: In this work, machining test was carried out in various machining conditions using ultrasonic vibration capable CNC machine. For work material, alumina ceramic (Al2O3) was used while for tool material diamond electroplated grinding wheel was used. To evaluate ultrasonic vibration effect, grinding test was performed with and without ultrasonic vibration in same machining condition. In ultrasonic mode, ultrasonic vibration of 20 kHz was generated by HSK 63 ultrasonic actuator. On the other hand, grinding forces were measured by KISTLER dynamometer. And an optimal sampling rate for grinding force measurement was obtained by a signal processing and frequency analysis. The surface roughness of the ceramic was also measured by using stylus type surface roughness instrument and atomic force microscope (AFM). Besides, the scanning electron microscope (SEM) was used for observation of surface integrality.