Article citationsMore>>

ASTM D 1776, “Standard Practice for Conditioning Textiles for Testing,” American Society for Testing and Materials, Annual Book of ASTM Standards, Vol. 7, No. 1, ASTM International, West Conshohocken, PA, USA, 2008.

has been cited by the following article:

• TITLE: Evaluation of Economical and Ecological Aspects of Denim Garments Dyeing with Fluorescent Dye

  AUTHORS: Muhammad Abdur Rashid, Md. Delwar Hossain, Muhammad Mufidul Islam, Md. Nakib-Ul-Hasan

  KEYWORDS: Fluorescent Dyestuff; Denim Fabric; Fastness Properties

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.1 No.7, December 25, 2013

  ABSTRACT: In this study the existing process (3 steps) and proposed process (2 steps) were evaluated during dyeing of denim fabric with fluorescent dye. It compared the effectiveness of these two processes of fluorescent dyeing in the textile industry. Here at first the grey denim fabric was pretreated by scouring and bleaching. Then the fabric was dyed in existing process i.e. through catanizing, dyeing and binding at 10% and 15% shades. Again the pretreated fabric was dyed in proposed process i.e. through catanizing and (dyeing and binding) with same shades. Then the properties of two types of dyed fabric were compared. This study provides a set of experimental results, discussion and comparison between the two processes. The results show that the proposed process has less power and time consumption and more water savings compared to existing process. So the evaluation reflected that the proposed process was much more effective than existing process of denim dyeing with fluorescent dye.