Article citationsMore>>

S.-Q. Liang, J. Zhong, X.-P. Tan and Y. Tang, “Mechanical Properties and Structure of Zirconia-Mullite Ceramics Prepared by In-situ Controlled Crystallization of Si-Al-Zr-O Amorphous Bulk,” Transaction of Nonferrous Metals Society of China, Vol. 18, No. 4, 2008, pp. 799-803. doi:10.1016/S1003-6326(08)60138-7

has been cited by the following article:

• TITLE: The Development and Characterization of Zirconia-Silica Sand Nanoparticles Composites

  AUTHORS: Tahir Ahmad, Othman Mamat

  KEYWORDS: Zirconia-Silica Sand Nanoparticles Composites, Physical Properties, Mechanical Properties, Microstructures

  JOURNAL NAME: World Journal of Nano Science and Engineering, Vol.1 No.1, March 24, 2011

  ABSTRACT: The present study aims to develop zirconia-Silica sand nanoparticles composites through powder processing route and to study the physical properties, mechanical properties and microstructure of the composites. Zirconia based silica sand nanoparticles composite with 5, 10, 15 and 20 wt.% were developed through powder processing technique and sintered at 1500 ℃ for two hours. A decreasing trend of green density however an improvement in sintered density was observed. Also the addition of silica sand nanoparticles with 20 wt.% increased the hardness up to 12.45 GPa and microstructures indicated the diffusion mechanism of silica sand nanoparticles into pore sites of the composites.