Article citationsMore>>

N. E. Zafeiropoulos, D. R. Williams and C. A. Baillie, “Engineering and Characterization of the Interface in Flax Fibre/Polypropylene Composite Materials. Part I. Development and Investigation of Surface Treatments,” Composites Part A: Applied Science and Manufacturing, Vol. 33, No. 8, 2002, pp. 1083-1093.
http://dx.doi.org/10.1016/S1359-835X(02)00082-9

has been cited by the following article:

• TITLE: Morphology, Thermal Behavior and Dynamic Rheological Properties of Wood Polypropylene Composites

  AUTHORS: Diène Ndiaye, Vincent Verney, Haroutioun Askanian, Sophie Commereuc, Adams Tidjani

  KEYWORDS: Morphology; Thermal Behavior; Dynamic Rheological Properties; Wood Polypropylene Composites

  JOURNAL NAME: Materials Sciences and Applications, Vol.4 No.11, November 26, 2013

  ABSTRACT: Wood polymer composites (WPCs) were made with pine and polypropylene matrix (PP). The composites were produced by melt blending in a Brabender at 180°C. Characterization of the samples, with the aid of scanning electron microscopy supplemented by microscope photography, showed an improved dispersion of wood in the polymeric material in presence of polypropylene grafted with maleic anhydride (MAPP) or nanoclay. The use of the MAPP instead of clay seems to have enhanced the level of crystallinity in the composites for the same levels of wood loading and also accelerates the crystallization. Melt rheological measurements of neat PP and PP-wood composites were carried out at 180°C with an ARES Rheometer scientific mechanical spectrometer in oscillatory frequency. All the composites materials exhibit viscoelastic values greater than those for neat PP. The samples containing MAPP as comptabilizer show the higher Newtonian viscosity, however, the addition of a small concentration of nanoparticles like nanoclays does not improve the resulting melt viscoelastic behavior of the composite.