Article citationsMore>>

G. Kocamustafaogullari, S. R. Smits and J. Razi, “Maximum and Mean Droplet Sizes in Annular Two-Phase Flow,” International Journal of Heat and Mass Transfer, Vol. 37, No. 6, 1994, pp. 955-965.
http://dx.doi.org/10.1016/0017-9310(94)90220-8

has been cited by the following article:

• TITLE: Experimental and Numerical Evaluation and Optimization of a Non Standard Pitot/Sampling Probe

  AUTHORS: Andrea Shmueli, Tor Erling Unander, Ole Jørgen Nydal

  KEYWORDS: Isokinetic Probe; Pitot Tube; CFD; Flow; Installation Effects

  JOURNAL NAME: Engineering, Vol.5 No.12, November 26, 2013

  ABSTRACT: An isokinetic sampling probe is designed and constructed to measure entrained liquid droplet fluxes in separated gasliquid pipe flows. This probe also has the capability of working as a non-standard Pitot tube when the sampling is stopped. CFD simulations using the commercial software Ansys CFX were carried out for single phase gas flow to analyze the non-standard design. Pitot tube velocity calculations and isokinetic sampling conditions were studied. The predicted results were compared against theoretical velocity profiles from the literature and with gas single phase experimental data acquired in a horizontal 49 m long steel pipeline with an internal diameter of 69 mm. The experiments were done by using a dense gas (SF6) at 7 bara. An asymmetry of the experimental velocity profiles reproduced with the numerical simulations. The CFD simulations made it possible to verify the design and predict and correct an installation problem.