Fabrication and characterization copper/diamond composites for heat sink application using powder metallurgy

Natural Science

ISSN Print: 2150-4091
ISSN Online: 2150-4105
www.scirp.net/journal/ns
E-mail: [email protected]

Citations

"Fabrication and characterization copper/diamond composites for heat sink application using powder metallurgy"
written by Zeinab Abdel Hamid, Sayed F. Moustafa, Fatma A. Morsy, Nevien Abdel Atty khalifa, Fatma Abdel Mouez,
published by Natural Science, Vol.3 No.11, 2011

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Enhancement of mechanical and physical properties of Cu–Ni composites by various contents of Y2O3 reinforcement
	Elaziem, A Hamada, T Allam… - Journal of Materials …, 2024

[2]	Enhanced interface structure of electroformed copper/diamond composites for thermal management applications
	Materials Testing, 2024

[3]	Fabrication and characterization of Ag coated Al2O3/GNs reinforced Cu nanocomposites for renewable energy applications
	Oqail, IA Rehab, M Abu-Okail… - Ceramics International, 2023

[4]	Study on the Microstructure and Mechanical Properties of Diamond Particle-Reinforced Copper-Iron Sandwich Composites Prepared by Powder Metallurgy
	Materials, 2022

[5]	Electrochemical and Morphological Characterization of Electroless Ni-P Coatings on Diamond Particles
	2020

[6]	The use of high-resolution methods of research in the design of the diamond-matrix interface to increase the durability of the diamond tool
	… laboratory. Diagnostics of …, 2020

[7]	Применение высокоразрешающих методов исследования при конструировании интерфейса алмаз–матрица для повышения стойкости алмазного …
	Заводская лаборатория …, 2020

[8]	Fabrication and characterizations of recycled aluminium-copper-cullet powder (AL-CU-CP) metal composite
	2020

[9]	Effects of Ag on the oxidation kinetics and properties in copper-alumina composites during in-situ fabrication
	2020

[10]	Применение высокоразрешающих методов исследования при конструировании интерфейса алмаз-матрица для повышения стойкости алмазного …
	2020

[11]	Structural, mechanical and tribological properties of Cu–ZrO2/GNPs hybrid nanocomposites
	2019

[12]	Features of the Structural-Phase State of the Diamond-Matrix Boundary Zone in Diamond-Containing Composite Materials
	2019

[13]	Enhancing the oxidation resistance and electrical conductivity of alumina reinforced copper-based composites via introducing Ag and annealing treatment
	2019

[14]	Structural and phase characteristics of the diamond/matrix interfacial zone in high-resistant diamond composites
	Composite Interfaces, 2018

[15]	Metal Matrix Composites with Diamond for Abrasion Resistance
	2018

[16]	SPS 制备金刚石/铜基复合材料的组织和性能
	特种铸造及有色合金, 2018

[17]	Microstructure and properties of diamond/Cu composites fabricated by spark plasma sintering
	Special Casting & Nonferrous Alloys, 2018

[18]	Mechanical and Physical Properties of Hybrid Cu-Graphite Composites Prepared via Powder Metallurgy Technique.
	2017

[19]	Microstructural and wear characterizations of Ultra-Dispersed Diamond (UDD) reinforced Cu-15 wt.% Ti composites fabricated via mechanical alloying and …
	2017

[20]	Mechanical and Physical Properties of Hybrid Cu-Graphite Composites Prepared via Powder Metallurgy Technique
	2017

[21]	Finite Element Analysis of Interfacial Debonding in Copper/Diamond Composites for Thermal Management Applications
	Materials, 2017

[22]	Mechanical and physical properties of hybrid Cu-graphite Composite prepared via powder metallurgy technique
	2017

[23]	An experimental investigation of bonding strengths for plasma facing components
	International journal of energy research, 2017

[24]	Template-free preparation of self-standing porous diamond films by hot filament chemical vapor deposition
	2016

[25]	Effect of sintering on the relative density of Cr-coated diamond/Cu composites prepared by spark plasma sintering
	International Journal of Minerals, Metallurgy, and Materials, 2016

[26]	Fabrication, Microstructure, Thermal and Electrical Properties of Copper Heat Sink Composites
	2016

[27]	Chemical and Metallurgy Department, Tshwane University of Technology. Pretoria, South Africa. Bag X680. Phone:+ 27736193028. dayo525@ yahoo. com
	2014

[28]	Tribological study of hot pressed oxide dispersion strengthened 2205 DSS composite
	Acta Universitaria, 2014

[29]	Effect of SPS consolidation parameters on submicron Cu and Cu–CNT composites for thermal management
	Powder Technology, 2014

[30]	Bezprądowa metalizacja materiałów węglowych. Część II. Metalizacja diamentu
	Inżynieria Powierzchni, 2013

[31]	Electroless Ni-Cr-B on Diamond Particles for Fabricated Copper/Diamond Composites as Heat Sink Materials
	ZA Hamid, FA Mouez, FA Morsy - studentsoutlook.com, 2013

[32]	Coating of diamond particles for production of metal matrix composites
	Surface Engineering, 2013

[33]	Electroless Ni–Cr–B on Diamond Particles for Fabricated Copper/Diamond Composites as Heat Sink Materials
	2013

[34]	Manufacturing and Characterization of Innovative Hybrid Cu-Gns/Al2o3 Coated Ag Nanocomposites for Renewable Energy Applications
	Oqail

[35]	Effect of Particle Size and Shape on Properties of Copper–Graphite Composites

[1]	Enhanced interface structure of electroformed copper/diamond composites for thermal management applications Materials Testing, 2024 DOI:10.1515/mt-2023-0236

[2]	Reference Module in Materials Science and Materials Engineering 2021 DOI:10.1016/B978-0-12-803581-8.00006-0

[3]	Encyclopedia of Materials: Composites 2021 DOI:10.1016/B978-0-12-819724-0.00006-9

[4]	The use of high-resolution methods of research in the design of the diamond-matrix interface to increase the durability of the diamond tool Industrial laboratory. Diagnostics of materials, 2020 DOI:10.26896/1028-6861-2020-86-6-62-71

[5]	Features of the Structural-Phase State of the Diamond-Matrix Boundary Zone in Diamond-Containing Composite Materials Materials Science Forum, 2019 DOI:10.4028/www.scientific.net/MSF.945.756

[6]	Structural and phase characteristics of the diamond/matrix interfacial zone in high-resistant diamond composites Composite Interfaces, 2018 DOI:10.1080/09276440.2018.1468692

[7]	Finite Element Analysis of Interfacial Debonding in Copper/Diamond Composites for Thermal Management Applications Materials, 2017 DOI:10.3390/ma10070739

[8]	An experimental investigation of bonding strengths for plasma facing components International Journal of Energy Research, 2017 DOI:10.1002/er.3890

[9]	Mechanical and Physical Properties of Hybrid Cu-Graphite Composites Prepared via Powder Metallurgy Technique Tikrit Journal of Engineering Sciences, 2017 DOI:10.25130/tjes.24.1.02

[10]	Fabrication, Microstructure, Thermal and Electrical Properties of Copper Heat Sink Composites Materials Sciences and Applications, 2016 DOI:10.4236/msa.2016.79046

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Natural Science

Natural Science

Journals Menu

Guidelines & Policies

Home

About SCIRP

Service

Policies