Preparation of PDOT:PSS Transparent Conductive Film Using Ink-Jet Printing

ISSN Print: 2162-531X
ISSN Online: 2162-5328
www.scirp.net/journal/ampc
E-mail: [email protected]

Citations

"Preparation of PDOT:PSS Transparent Conductive Film Using Ink-Jet Printing"
written by Atsushi Nitta, Kazuki Shimono,
published by Advances in Materials Physics and Chemistry, Vol.5 No.12, 2015

has been cited by the following article(s):

[1]	银纳米线宽光谱透明导电薄膜研究
	Acta Optica Sinica, 2022

[2]	Graphene sheets incorporation in ZnO nanostructure thin film for enhancing the performance of DSSC
	2020

[3]	Fabrication of Resistor Component Using Magnetostrictive Inkjet Printing at Room Temperature
	2019

[4]	Fabrication of electroluminescence device for PEDOT: PSS/ploy TPD/Eu2O3 nanoparticles junction
	2019

[5]	Fabrication of Resistor Component Using Magnetostrictive Inkjet Printing at Room Temperature.
	Journal of Imaging Science & …, 2019

[6]	Characteristics Improvement of PEDOT: PSS Transparent Conductive Film Prepared by Ink-Jet Printing
	2016

[1]	Investigation of waveform parameters in inkjet printing of PEDOT:PSS ink for flexible electronics fabrication Flexible and Printed Electronics, 2025 DOI:10.1088/2058-8585/ae19f8

[2]	Examination of Treatment Methods for a PEDOT:PSS Transparent Conductive Film Produced Using an Inkjet Method Advances in Materials Physics and Chemistry, 2017 DOI:10.4236/ampc.2017.78024

[3]	Characteristics Improvement of PEDOT:PSS Transparent Conductive Film Prepared by Ink-Jet Printing Advances in Materials Physics and Chemistry, 2016 DOI:10.4236/ampc.2016.68024

Top