Finite element study on the predicted equivalent stresses in the artificial hip joint

"Finite element study on the predicted equivalent stresses in the artificial hip joint"
written by Mamdouh M. Monif,
published by Journal of Biomedical Science and Engineering, Vol.5 No.2, 2012

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Achieving high accuracy of Co-Cr-Mo femoral head for improving tribological properties of hip joint prosthesis via a three-axial MFAF process
	Materials Today Communications, 2024

[2]	Optimization and the Impact of Various Factors on the Orthopedic Cement Used in the Total Hip Arthroplasty
	Journal of …, 2023

[3]	Wear estimation at the contact surfaces of oval shaped hip implants using finite element analysis
	Cogent …, 2023

[4]	Evolution of different designs and wear studies in total hip prosthesis using finite element analysis: A review
	Cogent Engineering, 2022

[5]	Comparative stress analysis of different suitable biomaterials for artificial hip joint and femur bone using finite element simulation
	Advances in Materials …, 2021

[6]	Load displacement simulation of CP-Ti/UHMWPE hip implant
	Journal of Medical …, 2021

[7]	Biomechanical analysis to probe role of bone condition and bodyweight in stiffness customization of femoral stem for improved periprosthetic 2 …
	2020

[8]	Optimized trapezoidal-shaped hip implant for total hip arthroplasty using finite element analysis
	2020

[9]	Biomechanical Analysis to Probe Role of Bone Condition and Bodyweight in Stiffness Customization of Femoral Stem for Improved Periprosthetic Biomechanical …
	2020

[10]	Effect of force during stumbling of the femur fracture with a different ce-mented total hip prosthesis
	2020

[11]	Biomechanical Analysis to Probe Role of Bone Condition and Subject Weight in Stiffness Customization of Femoral Stem for Improved Periprosthetic Biomechanical …
	2020

[12]	Effects of femoral head diameter on the predicted acetabular cup wear volume of CP-Ti and UHMWPE hip implants
	2019

[13]	Role of different orthopedic biomaterials on wear of hip joint prosthesis: A review
	Materials Today: Proceedings, 2018

[14]	Numerical simulation of the femur fracture with and without prosthesis under static loading using extended finite element method (X-FEM)
	2017

[15]	Numerical simulation of the femur fracture for different cemented hip femoral prosthesis under forces during stumbling
	2017

[16]	Patient-specific hip geometry has greater effect on THA wear than femoral head size
	Journal of Biomechanics, 2016

[17]	Contact of dual mobility implants: effects of cup wear and inclination
	Computer methods in biomechanics and biomedical engineering, 2015

[18]	The contact stress calculations in artificial hip-joint by finite element method
	International Journal of Computer Aided Engineering and Technology, 2014

[19]	Analysis of Femoral Components of Cemented Total Hip Arthroplasty
	Journal of The Institution of Engineers (India): Series D, 2014

[20]	Analysis of Femoral Components of Cemented Total Hip-Arthroplasty
	arXiv preprint arXiv:1403.1867, 2014

[21]	Influence of bearing geometry and material on the contact of dual mobility implants: a finite element analysis
	International Journal of Biomedical Engineering and Technology, 2014

[22]	The Effect of Dynamic Loading on Stresses Induced in Charnley Hip Prosthesis
	Journal of Engineering, 2014

[23]	A Mathematical Model to Calculate Contact Stresses In Artificial Human Hip Joint
	KV Nemade, VK Tripathi - Citeseer, 2013

[24]	Computer-aided Modeling and Experimental Study of a New Surgical Instrument
	JZ Li - researchgate.net, 2013

[25]	Finite Element Analysis and Comparative Study on Stresses Induced on UHMWPE Acetabular Cup Surface of the Artificial Hip Implant During Free Walking and Walking While Carrying Weights
	Polymer, 2013

[26]	Finite Element Analysis and Comparative Study on Stresses Induced on UHMWPE Acetabular Cup Surface of the Artificial Hip Implant During Free Walking and …
	Trends in Biomaterials & Artificial Organs, 2013

[27]	Finite element analysis and comparative study on stresses induced on UHMWPE acetabular cup surface of the artificial hip implant during free walking and walking …
	Trends in Biomaterials and Artificial Organs, 2013

[28]	On the influence of acetabular cup wear and orientation on contact mechanics of dual mobility hip implants
	Proceedings: the 7th Australasian Congress on Applied Mechanics (ACAM 7), 9-12 December 2012, the University of Adelaide, North Terrace Campus/National Committee on Applied Mechanics of Engineers Australia. Engineers Australia, 2012

[1]	Numerical Investigation of Polymer-based Biomaterials for Artificial Hip Joint with Diverse Boundary Conditions Recent Patents on Engineering, 2025 DOI:10.2174/0118722121315250240822091850

[2]	IN SILICO APPROACH IN ESTIMATING WEAR AND FAILURE OF DUAL MOBILITY IMPLANTS WITH LARGE CUP AND LINER THICKNESS UNDER DIFFERENT CUP INCLINATION ANGLES FOR ROUTINE GAIT ACTIVITIES Journal of Mechanics in Medicine and Biology, 2025 DOI:10.1142/S0219519425500198

[3]	Achieving high accuracy of Co-Cr-Mo femoral head for improving tribological properties of hip joint prosthesis via a three-axial MFAF process Materials Today Communications, 2024 DOI:10.1016/j.mtcomm.2024.108907

[4]	Optimization and the Impact of Various Factors on the Orthopedic Cement Used in the Total Hip Arthroplasty Journal of Biomimetics, Biomaterials and Biomedical Engineering, 2023 DOI:10.4028/p-us013z

[5]	Wear estimation at the contact surfaces of oval shaped hip implants using finite element analysis Cogent Engineering, 2023 DOI:10.1080/23311916.2023.2222985

[6]	Evolution of different designs and wear studies in total hip prosthesis using finite element analysis: A review Cogent Engineering, 2022 DOI:10.1080/23311916.2022.2027081

[7]	Comparative stress analysis of different suitable biomaterials for artificial hip joint and femur bone using finite element simulation Advances in Materials and Processing Technologies, 2021 DOI:10.1080/2374068X.2021.1949541

[8]	Optimized trapezoidal-shaped hip implant for total hip arthroplasty using finite element analysis Cogent Engineering, 2020 DOI:10.1080/23311916.2020.1719575

[9]	Effects of femoral head diameter on the predicted acetabular cup wear volume of CP-Ti and UHMWPE hip implants Journal of Physics: Conference Series, 2019 DOI:10.1088/1742-6596/1218/1/012012

[10]	Role of different orthopedic biomaterials on wear of hip joint prosthesis: A review Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.06.468

[11]	Analysis of Femoral Components of Cemented Total Hip Arthroplasty Journal of The Institution of Engineers (India): Series D, 2016 DOI:10.1007/s40033-015-0096-2

[12]	Patient-specific hip geometry has greater effect on THA wear than femoral head size Journal of Biomechanics, 2016 DOI:10.1016/j.jbiomech.2016.10.030

[13]	Contact of dual mobility implants: effects of cup wear and inclination Computer Methods in Biomechanics and Biomedical Engineering, 2015 DOI:10.1080/10255842.2014.936856

	[email protected]
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Biomedical Science and Engineering

Journal of Biomedical Science and Engineering

Journals Menu

Guidelines & Policies

Home

About SCIRP

Service

Policies