An Overview of Modeling Yarn’s 3D Geometric Configuration

Journal of Textile Science and Technology

ISSN Print: 2379-1543
ISSN Online: 2379-1551
www.scirp.net/journal/jtst
E-mail: [email protected]

Citations

"An Overview of Modeling Yarn’s 3D Geometric Configuration"
written by Tianyong Zheng, Jing Wei, Zhengtao Shi, Tingting Li, Zhen Wu,
published by Journal of Textile Science and Technology, Vol.1 No.1, 2015

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Intuitive approach for design of inner structure by mimicking magnetic effect
	Journal of Computational Design and …, 2023

[2]	Numerical modeling of 3D woven composite reinforcements: A review
	Composites Part A: Applied …, 2022

[3]	Automatic Modeller of Textile Yarns at Fibre Level
	Materials, 2022

[4]	Intuitive Approach for Modeling Inner Structure by Mimicking Magnetic Effect
	SSRN Electronic Journal, 2022

[5]	3D MODELLING OF UNTWISTED MULTIFILAMENT THREADS, CURVED IN A KNITTED LOOP
	Deutsche Internationale …, 2021

[6]	Magnet-inspired intuitive design tool for inner structures of solid models
	2021

[7]	Shape Analysis of Generalized Cubic Curves
	2020

[8]	Progress on the Fabrication of Smart Textiles Based on Soft Strain Sensors
	2019

[9]	3-Dimension Simulation for Loop Structure of WeftKnitted Fabric Considering Mechanical Properties of Yarn
	Journal of Fiber Science and Technology, 2017

[10]	Study on 3-Dimension Simulation for Loop Structure of Weft-Knitted Fabric Considering Mechanical Properties of Yarn
	Thesis or Dissertation, 2017

[11]	On investigating the differential geometric properties of the knitted fabrics produced by some computer aided geometric design curves
	2016

[1]	Interference detection and correction of 3D geometric structure of woven fabrics constructed by B-spline surface The Journal of The Textile Institute, 2026 DOI:10.1080/00405000.2025.2606607

[2]	Development of ABAQUS Plugin Predicting the Mechanical Behavior and Failure Modes of Weft Knitted-Reinforced Composites Fibers and Polymers, 2025 DOI:10.1007/s12221-025-00850-2

[3]	Intuitive approach for design of inner structure by mimicking magnetic effect Journal of Computational Design and Engineering, 2023 DOI:10.1093/jcde/qwac129

[4]	Automatic Modeller of Textile Yarns at Fibre Level Materials, 2022 DOI:10.3390/ma15248887

[5]	Numerical modeling of 3D woven composite reinforcements: A review Composites Part A: Applied Science and Manufacturing, 2022 DOI:10.1016/j.compositesa.2021.106729

[6]	Shape Analysis of Generalized Cubic Curves Computer-Aided Design, 2020 DOI:10.1016/j.cad.2020.102849

[7]	Progress on the Fabrication of Smart Textiles Based on Soft Strain Sensors AATCC Journal of Research, 2019 DOI:10.14504/ajr.6.6.1

[8]	3-Dimension Simulation for Loop Structure of WeftKnitted Fabric Considering Mechanical Properties of Yarn Journal of Fiber Science and Technology, 2017 DOI:10.2115/fiberst.2017-0015

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Textile Science and Technology

Journal of Textile Science and Technology

Journals Menu

Guidelines & Policies

Home

About SCIRP

Service

Policies