Analysing the Microstructures and Pin-on-Disc Wear Properties of 1010 Steel-Based and B<sub>4</sub>C-Added Materials Produced through Powder Metallurgy

ISSN Print: 2331-4222
ISSN Online: 2331-4249
www.scirp.net/journal/wjet
E-mail: [email protected]

Citations

"Analysing the Microstructures and Pin-on-Disc Wear Properties of 1010 Steel-Based and B₄C-Added Materials Produced through Powder Metallurgy"
written by Mehtap Demirel, Vahdettin Koç,
published by World Journal of Engineering and Technology, Vol.9 No.3, 2021

has been cited by the following article(s):

[1]	Influence of Varying Amounts of Alumina (Al2O3) on the Wear Behavior of ZnO, SiO2 and TiO2 Compounds
	Processes, 2023

[2]	Microstructural evaluation and wear behavior of B4C particle reinforced TiO2-SiO2-ZnO compound by hot-pressing method
	Materials Research Express, 2023

[1]	Characterization of Cr3C2/Ni ceramic–metal composites produced by direct resistance rapid hot pressing method The European Physical Journal Plus, 2025 DOI:10.1140/epjp/s13360-025-06502-x

[2]	Influence of Varying Amounts of Alumina (Al2O3) on the Wear Behavior of ZnO, SiO2 and TiO2 Compounds Processes, 2023 DOI:10.3390/pr11041073

[3]	Microstructural evaluation and wear behavior of B4C particle reinforced TiO2-SiO2-ZnO compound by hot-pressing method Materials Research Express, 2023 DOI:10.1088/2053-1591/acdb35