The Development and Characterization of Polycaprolactone and Titanium Dioxide Hybrids

Advances in Nanoparticles

ISSN Print: 2169-0510
ISSN Online: 2169-0529
www.scirp.net/journal/anp
E-mail: [email protected]

Citations

"The Development and Characterization of Polycaprolactone and Titanium Dioxide Hybrids"
written by Mariana Sato de S. B. Monteiro, Maria Inês Bruno Tavares,
published by Advances in Nanoparticles, Vol.7 No.1, 2018

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Multifunctional Nanocomposite Membranes Containing TiO2 Developed by Air-Jet-Spun Fibers for Tissue Engineering
	Vázquez, IA Núñez-Tapia… - Biomedical Materials & …, 2024

[2]	Development of polyvinylpyrrolidone, inorganic nanoparticles, and lithium carbonate nanostructured systems
	Polymer Engineering …, 2023

[3]	Development of three‐dimensionally printed vascular stents of bioresorbable poly(l‐lactide‐co‐caprolactone)
	… Research Part B …, 2023

[4]	3D printed polymeric drug-eluting implants for personalized therapy
	2022

[5]	In vitro characterization of a biocompatible composite based on poly (3-hydroxybutyrate)/hydroxyapatite nanoparticles as a potential scaffold for tissue engineering
	Journal of the …, 2022

[6]	Production of polyhydroxyalkanoates by three novel species of Marinobacterium
	International Journal of Biological …, 2022

[7]	Influence of the printing parameters on the properties of Poly (lactic acid) scaffolds obtained by fused deposition modeling 3D printing
	Polymers and …, 2021

[8]	Effect of poly (ε‐caprolactone) and titanium (IV) dioxide content on the UV and hydrolytic degradation of poly (lactic acid)/poly (ε‐caprolactone) blends
	2021

[9]	Electrospraying Oxygen-Generating Microparticles for Tissue Engineering Applications
	2020

[10]	Development of a novel synthetic coating for abdominal hernia meshes
	THESIS, 2020

[11]	3D Printing of Photocatalytic Filters Using a Biopolymer to Immobilize TiO2Nanoparticles
	Journal of the …, 2019

[12]	3D Printing of Photocatalytic Filters Using a Biopolymer to Immobilize TiO2 Nanoparticles
	2019

[13]	Selected Physicochemical and Pharmaceutical Properties of Poly-ε-caprolactone and Poly (d, l-lactide-co-ε-caprolactone) Conjugates of Lamivudine Synthesized via …
	2019

[14]	Desenvolvimento de nanofibras de policaprolactona incorporadas com nanopartículas de óxido de zinco para encapsulamento do etexilato de dabigatrana
	2019

[1]	Evaluation of the electrical behavior of tungsten trioxide and cobalt oxide nanoparticles filled poly (ɛ-caprolactone) composite for optoelectronic devices Materials Chemistry and Physics, 2025 DOI:10.1016/j.matchemphys.2024.130211

[2]	Eco-friendly alginate/PCL-TiO2 hybrid biocomposites: Preparation, properties, and methylene blue photodegradation South African Journal of Chemical Engineering, 2025 DOI:10.1016/j.sajce.2024.12.003

[3]	Multifunctional Nanocomposite Membranes Containing TiO2 Developed by Air-Jet-Spun Fibers for Tissue Engineering Biomedical Materials & Devices, 2024 DOI:10.1007/s44174-023-00148-y

[4]	Non-Isothermal Degradation Mechanism of Micro/Nano Titanium Dioxide-Enhanced Polycaprolactone Biocomposite Processes, 2024 DOI:10.3390/pr12061214

[5]	Development of polyvinylpyrrolidone, inorganic nanoparticles, and lithium carbonate nanostructured systems Polymer Engineering & Science, 2023 DOI:10.1002/pen.26426

[6]	Development of three‐dimensionally printed vascular stents of bioresorbable poly( l ‐lactide‐co‐caprolactone) Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2022 DOI:10.1002/jbm.b.35184

[7]	Production of polyhydroxyalkanoates by three novel species of Marinobacterium International Journal of Biological Macromolecules, 2022 DOI:10.1016/j.ijbiomac.2021.12.019

[8]	Influence of the printing parameters on the properties of Poly(lactic acid) scaffolds obtained by fused deposition modeling 3D printing Polymers and Polymer Composites, 2021 DOI:10.1177/09673911211040770

[9]	Electrospraying Oxygen-Generating Microparticles for Tissue Engineering Applications International Journal of Nanomedicine, 2020 DOI:10.2147/IJN.S237334

[10]	3D Printing of Photocatalytic Filters Using a Biopolymer to Immobilize TiO2 Nanoparticles Journal of The Electrochemical Society, 2019 DOI:10.1149/2.0341905jes

[11]	Titanium Nanorods Loaded PCL Meshes with Enhanced Blood Vessel Formation and Cell Migration for Wound Dressing Applications Macromolecular Bioscience, 2019 DOI:10.1002/mabi.201900058

[12]	Selected Physicochemical and Pharmaceutical Properties of Poly-ε-caprolactone and Poly(d,l-lactide-co-ε-caprolactone) Conjugates of Lamivudine Synthesized via Ring-Opening Polymerization Polymers, 2019 DOI:10.3390/polym11122124

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Advances in Nanoparticles

Advances in Nanoparticles

Journals Menu

Guidelines & Policies

Home

About SCIRP

Service

Policies