Numerical Study to Represent Non-Isothermal Melt-Crystallization Kinetics at Laser-Powder Cladding

ISSN Print: 2164-5345
ISSN Online: 2164-5353
www.scirp.net/journal/mnsms
E-mail: [email protected]

Citations

"Numerical Study to Represent Non-Isothermal Melt-Crystallization Kinetics at Laser-Powder Cladding"
written by V. G. Niziev, F. Kh. Mirzade, V. Ya. Panchenko, M. D. Khomenko, R. V. Grishaev, S. Pityana, C. V. Rooyen,
published by Modeling and Numerical Simulation of Material Science, Vol.3 No.2, 2013

has been cited by the following article(s):

[1]	Modeling nonisothermal laser amorphization: a multicomponent alloy perspective
	The International Journal of …, 2024

[2]	Models of recrystallization activated by a diffusion flow of impurities from a thin-film coating with a convection term at the crystal surface: exact solutions
	Mathematical Modelling of …, 2023

[3]	SIMULATION OF TWO-COMPONENT POWDER MOLDING MELTING UNDER VACUUM SINTERING CONDITIONS
	Interfacial Phenomena and Heat …, 2023

[4]	ВОПРОС СОЗДАНИЯ ФИЗИЧЕСКИХ И МАТЕМАТИЧЕСКИХ МОДЕЛЕЙ ТЕПЛО-И МАССОПЕРЕНОСА ПРИ ИЗГОТОВЛЕНИИ ДЕТАЛЕЙ МЕТОДОМ …
	Авиационные …, 2022

[5]	Recent trends in laser cladding and surface alloying
	2021

[6]	Laser additive manufacturing of copper–chromium–niobium alloys using gas atomized powder
	2020

[7]	Recent Advances in the Design of Nanocomposite Materials via Laser Techniques for Biomedical Applications
	2019

[8]	Advances in Nanostructured Composites: Volume 1: Carbon Nanotube and Graphene Composites
	2019

[9]	Advances in Nanostructured Composites: Volume 2: Applications of Nanocomposites
	2019

[10]	Advances in Nanostructured Composites
	2017

[1]	Numerical analysis of the influence of heat cumulation on laser amorphization of bulk metallic glass The International Journal of Advanced Manufacturing Technology, 2025 DOI:10.1007/s00170-025-15119-4

[2]	Modeling nonisothermal laser amorphization: a multicomponent alloy perspective The International Journal of Advanced Manufacturing Technology, 2024 DOI:10.1007/s00170-024-13025-9

[3]	SIMULATION OF TWO-COMPONENT POWDER MOLDING MELTING UNDER VACUUM SINTERING CONDITIONS Interfacial Phenomena and Heat Transfer, 2023 DOI:10.1615/InterfacPhenomHeatTransfer.2023047054

[4]	Laser additive manufacturing of copper–chromium–niobium alloys using gas atomized powder International Journal of Materials Research, 2020 DOI:10.3139/146.111912