Acoustic Emission Studies on Weld Bead Defects in Nuclear Grade SS 316L Materials

ISSN Print: 2162-5786
ISSN Online: 2162-5794
www.scirp.net/journal/oja
E-mail: [email protected]

Citations

"Acoustic Emission Studies on Weld Bead Defects in Nuclear Grade SS 316L Materials"
written by Ranganayakulu S. V., Shiva Raju J., Kuchedludu A., Ramesh Kumar B.,
published by Open Journal of Acoustics, Vol.4 No.3, 2014

has been cited by the following article(s):

[1]	Effects of welding defects on the damage evolution of Q245R steel using acoustic emission and infrared thermography
	… Testing and Evaluation, 2022

[2]	Monitoring Welded Joints of Steel Pressure Vessels Using Acoustic Emission: Case Study
	… of the Indian Institute of Metals, 2022

[3]	Spectral analysis for crack detection during TIG welding using acoustic emission techniques
	2020

[4]	YEAR
	… of constructional steel …, 2017

[5]	Acoustic emission method for defect detection and identification in carbon steel welded joints
	Journal of Constructional Steel Research, 2017

[6]	STUDIES OF ACOUSTIC EMISSION SIGNATURES FOR QUALITY ASSURANCE OF SS 316L WELDED SAMPLES UNDER DYNAMIC LOAD CONDITIONS
	2016

[1]	Monitoring of weld damage based on deep learning and acoustic emission methods Journal of Constructional Steel Research, 2025 DOI:10.1016/j.jcsr.2025.109583

[2]	Effects of welding defects on the damage evolution of Q245R steel using acoustic emission and infrared thermography Nondestructive Testing and Evaluation, 2022 DOI:10.1080/10589759.2022.2094377

[3]	Monitoring Welded Joints of Steel Pressure Vessels Using Acoustic Emission: Case Study Transactions of the Indian Institute of Metals, 2022 DOI:10.1007/s12666-022-02599-1

[4]	Spectral analysis for crack detection during TIG welding using acoustic emission techniques Insight - Non-Destructive Testing and Condition Monitoring, 2020 DOI:10.1784/insi.2020.62.8.478

[5]	Acoustic emission method for defect detection and identification in carbon steel welded joints Journal of Constructional Steel Research, 2017 DOI:10.1016/j.jcsr.2017.03.012