Finite Element Method Applied to the Eigenvalue Analysis of Flexible Rotors Supported by Journal Bearings

ISSN Print: 1947-3931
ISSN Online: 1947-394X
www.scirp.net/journal/eng
E-mail: [email protected]

Citations

"Finite Element Method Applied to the Eigenvalue Analysis of Flexible Rotors Supported by Journal Bearings"
written by Wéderley M. Miranda, Marco Tulio C. Faria,
published by Engineering, Vol.6 No.3, 2014

has been cited by the following article(s):

[1]	Simulation of the movement of hedge cutter links in the Simulink application of the Matlab package
	IOP Conference Series …, 2021

[2]	11 Tribology in Ceramic
	… and Biomaterials in Ventricular Assist Devices, 2021

[3]	Tribology in Ceramic Biomaterials
	… and Biomaterials in Ventricular Assist Devices, 2021

[4]	Movement simulation of flexible working body links in the Unity cross-platform development environment
	2020

[5]	Critical assessment of different mass lumping schemes for higher order serendipity finite elements
	2019

[6]	INSTITUTE OF ENGINEERING PULCHOWK CAMPUS
	2019

[7]	Multiple-degree-of-freedom rotor model with total unbalance and possible contact on stator
	2019

[8]	Dynamic behavior of fluid film bearings, applications in the flexible rotor instability analysis
	2018

[9]	Parametric Instability of Static Shafts-Disk System Using Finite Element Method
	IOP Conference Series: Materials Science and Engineering, 2017

[10]	Design and simulation of magnetic thrust and radial bearing system
	2016

[11]	STUDY OF ROTOR BEARING SYSTEM-A REVIEW
	International Research Journal of Engineering and Technology, 2015

[1]	Movement simulation of flexible working body links in the Unity cross-platform development environment IOP Conference Series: Earth and Environmental Science, 2020 DOI:10.1088/1755-1315/595/1/012014

[2]	Critical assessment of different mass lumping schemes for higher order serendipity finite elements Computer Methods in Applied Mechanics and Engineering, 2019 DOI:10.1016/j.cma.2019.03.028

[3]	Multiple-degree-of-freedom rotor model with total unbalance and possible contact on stator IOP Conference Series: Materials Science and Engineering, 2019 DOI:10.1088/1757-899X/489/1/012041

[4]	Parametric Instability of Static Shafts-Disk System Using Finite Element Method IOP Conference Series: Materials Science and Engineering, 2017 DOI:10.1088/1757-899X/241/1/012002