Mechanical Validation of Perfect Tibia 3D Model Using Computed Tomography Scan

ISSN Print: 1947-3931
ISSN Online: 1947-394X
www.scirp.net/journal/eng
E-mail: [email protected]

Citations

"Mechanical Validation of Perfect Tibia 3D Model Using Computed Tomography Scan"
written by Ehsan Taheri, Behrooz Sepehri, Reza Ganji,
published by Engineering, Vol.4 No.12, 2012

has been cited by the following article(s):

[1]	Finite element analysis on tibia bone of three siblings
	AIP Conference Proceedings, 2023

[2]	The use of frictional and bonded contact models in finite element analysis for internal fixation of tibia fracture
	Frattura ed Integrità …, 2022

[3]	COST-BENEFIT ANALYSIS OF 3D FINITE ELEMENT MODELING OF THE TIBIA USING A HEALTHY RUNNING POPULATION.
	2021

[4]	Cost-Benefit Analysis of 3D Finite Element Modeling of the Tibia Using a Healthy Running Population
	2021

[5]	Determining Young's Modulus of Elasticity of Cortical Bone from CT Scans
	Computational Modeling and …, 2021

[6]	Quantitative assessment of compress-type osseointegrated prosthetic implants in human bone using electromechanical impedance spectroscopic methods
	2019

[7]	Identification of bone fracture in osseointegrated prostheses using Rayleigh wave methods
	Proceedings Volume 10600, Health Monitoring of Structural and Biological Systems XII, 2018

[8]	Application of guided wave methods to quantitatively assess healing in osseointegrated prostheses
	Structural Health Monitoring, 2018

[9]	IWSHM 2017: Application of guided wave methods to quantitatively assess healing in osseointegrated prostheses
	2018

[10]	Finite Element Analysis of Tibia Bone
	2018

[11]	Unified In Vivo/Ex Vivo Sensing Architectures for Monitoring Osseointegrated Prosthetics
	2018

[12]	Three-Dimensional Finite Element Analysis of Surface Mesh Model of Human Tibia Bone
	2018

[13]	Stress Distribution in Human Tibia Bones using Finite Element Analysis
	2016

[1]	Finite element analysis on tibia bone of three siblings 4TH INTERNATIONAL SCIENTIFIC CONFERENCE OF ENGINEERING SCIENCES AND ADVANCES TECHNOLOGIES, 2023 DOI:10.1063/5.0118577

[2]	Computational Modeling and Simulation Examples in Bioengineering 2021 DOI:10.1002/9781119563983.ch4

[3]	Identification of bone fracture in osseointegrated prostheses using Rayleigh wave methods Health Monitoring of Structural and Biological Systems XII, 2018 DOI:10.1117/12.2301023

[4]	Application of guided wave methods to quantitatively assess healing in osseointegrated prostheses Structural Health Monitoring, 2018 DOI:10.1177/1475921718782399