Importance of Surface Preparation for Corrosion Protection of Automobiles

Journal of Surface Engineered Materials and Advanced Technology

ISSN Print: 2161-4881
ISSN Online: 2161-489X
www.scirp.net/journal/jsemat
E-mail: [email protected]

Citations

"Importance of Surface Preparation for Corrosion Protection of Automobiles"
written by Narayan Chandra Debnath,
published by Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1A, 2013

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Dual templated-based synthesis of smart zeolites and its self-healing anticorrosion coatings
	European Polymer …, 2024

[2]	Enhancement of Low-Zinc Phosphate Coatings with addition Ni2+ and Mn2+ Cations: Structure, Corrosion Resistance and Paint Adhesion
	Journal of Materials Research and …, 2024

[3]	Exploring the role of passivating conversion coatings in enhancing the durability of organic-coated steel against filiform corrosion using an electrochemical …
	Progress in Organic Coatings, 2024

[4]	Obtaining red phosphate coatings on steel at room temperature
	Engineering Proceedings, 2023

[5]	A study on automotive sheetmetal surface pretreatment: liquid activation and low temperature phosphating
	2023

[6]	Crystal Structure and Properties of Zinc Phosphate Layers on Aluminum and Steel Alloy Surfaces. Crystals 2023, 13, 369
	2023

[7]	Evaluation of abatement options to reduce formaldehyde emissions in vehicle assembly paint shops using the Life Cycle methodology
	Muñoz, R Adam, F Omil… - Cleaner Environmental …, 2023

[8]	Crystal structure and properties of zinc phosphate layers on aluminum and steel alloy surfaces
	Crystals, 2023

[9]	Design and Fabrication of Automatic Seven Tank Process of Pre-Treatment Before Powder Coating
	International Journal of …, 2022

[10]	Review of coating and curing processes: Evaluation in automotive industry
	Physics of Fluids, 2022

[11]	Dip degreasing stage improvement in car body pretreatment process by Six Sigma
	Key Engineering Materials, 2021

[12]	Effect of Chromium Content in the Steel Substrate on the Coating Formation and Tribological Properties of Manganese Phosphate Coatings
	Journal of Materials Engineering and …, 2021

[13]	Design and fabrication of Automated mechanism for chemical pre-treatment process in Powder coating
	2021

[14]	An Alternate CED Process for Low Volume BIW Manufacturing with Single Stage Vertical Dipping
	2021

[15]	Using of rust converters for deposition of anti-corrosion coatings
	Materials Today …, 2020

[16]	The effects of the steel's surface quality on the properties of anti-corrosion coatings
	2020

[17]	PROTECTIVE PROPERTIES OF PHOSPHATE COATINGS BASED ON RUST CONVERTERS
	2020

[18]	Mechanism analysis of laser removal of metal oxide on the marine steel based on LIBS
	2019

[19]	Mitigation for Edge Corrosion Protection for Automotive Bodies
	2019

[20]	WORLD PHOSPHATE INDUSTRY
	Iraqi Bulletin of Geology and Mining, 2017

[21]	车身内腔电泳膜厚的精确计算及工艺孔的影响研究
	中国公路学报, 2017

[22]	A review on paint sludge from automotive industries: Generation, characteristics and management
	Journal of Environmental Management, 2016

[23]	Resistência à corrosão de aços revestidos com zinco submetidos ao teste em câmara de névoa salina
	2016

[24]	Development of an anti corrosion coating using organic resins hybrid system/Ramis Rao a/l Subramanian
	2016

[25]	Evaluations of Automotive Paints Coating Performance Using Electrochemical Impedance Spectroscopic Method
	Engineering and Technology Journal, 33(9 Part (A) Engineering), 2015

[26]	Nanosecond pulsed laser induced generation of open macro porosity on sintered ZnO pellet surface
	Applied Surface Science, 2015

[27]	Influence of process parameters on microstructure and corrosion properties of hopeite coating on stainless steel
	Corrosion Science, 2015

[28]	不同钢材在污泥中的腐蚀行为
	腐蚀科学与防护技术, 2015

[29]	AVALIAÇÃO DE UM TROCADOR DE CALOR UTILIZADO NO AQUECIMENTO DE ÁGUA DE DESENGRAXE
	2015

[30]	Delta Ferrite: Cracking of Steel Fasteners
	2015

[31]	Phosphate Coatings
	2014

[32]	Delta Ferrite in Heat Treated Bolts - Characterization and Consequences
	2013

[33]	Cleaner Environmental Systems
	Munoz, R Adam

[34]	Defining the most eco-efficient vehicle paint shop in view of formaldehyde emissions performance

[1]	Optimization of the Hood Ro-dip CED Process Through Strategic Support Rod Placement at Multiple Locations for Enhanced Hood Gap and Flushness Control in Automotive Manufacturing SAE Technical Paper Series, 2026 DOI:10.4271/2026-26-0486

[2]	Enhancing corrosion resistance of Epoxy-Based composite coatings on mild steel using functionalized aluminium oxide (Al₂O₃) nanoparticles Scientific Reports, 2026 DOI:10.1038/s41598-026-35180-7

[3]	Progress in eco-friendly aerospace coatings: the future beyond chromates Journal of Electrochemical Science and Engineering, 2026 DOI:10.5599/jese.2775

[4]	Analysis of N19 product quality control in the PTED process using the Six Sigma DMAIC method (Case Study: X Ltd) Journal of Physics: Conference Series, 2025 DOI:10.1088/1742-6596/3103/1/012038

[5]	Exploring the role of passivating conversion coatings in enhancing the durability of organic-coated steel against filiform corrosion using an electrochemical simulated approach Progress in Organic Coatings, 2024 DOI:10.1016/j.porgcoat.2024.108357

[6]	Effect of different sealers on the properties of phosphate conversion coatings on 30CrMnSi alloys Anti-Corrosion Methods and Materials, 2024 DOI:10.1108/ACMM-01-2024-2959

[7]	A Study on Automotive Sheetmetal Surface Pretreatment: Liquid Activation and Low Temperature Phosphating SAE Technical Paper Series, 2023 DOI:10.4271/2023-28-1324

[8]	An Alternate CED Process for Low Volume BIW Manufacturing with Single Stage Vertical Dipping SAE Technical Paper Series, 2021 DOI:10.4271/2021-28-0227

[9]	Mechanism analysis of laser removal of metal oxide on the marine steel based on LIBS Fifth Symposium on Novel Optoelectronic Detection Technology and Application, 2019 DOI:10.1117/12.2521100

[10]	Mitigation for Edge Corrosion Protection for Automotive Bodies SAE Technical Paper Series, 2019 DOI:10.4271/2019-28-2561

[11]	Nanosecond pulsed laser induced generation of open macro porosity on sintered ZnO pellet surface Applied Surface Science, 2015 DOI:10.1016/j.apsusc.2014.11.007

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Surface Engineered Materials and Advanced Technology

Journal of Surface Engineered Materials and Advanced Technology

Journals Menu

Guidelines & Policies

Home

About SCIRP

Service

Policies