The Effect of Chemical Composition and Thermal Sprayed Method on the Chromium and Tungsten Carbides Coatings Microstructure

ISSN Print: 2161-4881
ISSN Online: 2161-489X
www.scirp.net/journal/jsemat
E-mail: [email protected]

Citations

"The Effect of Chemical Composition and Thermal Sprayed Method on the Chromium and Tungsten Carbides Coatings Microstructure"
written by Maria W. Richert, Borys Mikułowski, Pawel Pałka, Agnieszka Hotloś, Malgorzata Perek-Nowak,
published by Journal of Surface Engineered Materials and Advanced Technology, Vol.3 No.1, 2013

has been cited by the following article(s):

[1]	Comparative Study into Microstructural and Mechanical Characterization of HVOF-WC-Based Coatings
	Crystals, 2022

[2]	ENHANCING THE PERFORMANCE OF INCONEL 601 ALLOY BY EROSION RESISTANT WC-CR-CO COATED MATERIAL
	Journal of …, 2022

[3]	Effect of the coating material compositions on the life of gas turbine hot section components
	2021

[4]	AISI D2 punch head damage: Fatigue and wear mechanism
	Engineering Failure Analysis, 2021

[5]	Influence of plasma spraying parameters on microstructure and corrosion resistance of Cr3C2-25NiCr cermet carbide coating
	2019

[6]	Laser beam melting of Cr3C2-NiCr
	2019

[7]	Characterization of Microstructure Coatings Used in Industry
	2019

[8]	A comparative study on slurry erosion behavior of HVOF sprayed coatings
	DYNA, 2017

[9]	Estudio comparativo del desgaste en mezclas erosivas de recubrimientos depositados por HVOF
	2017

[10]	Role of Thermal Spray Coatings on Wear, Erosion and Corrosion Behavior: A Review
	2017

[11]	Study on corrosion properties of WC-Ni cold spray coatings to mitigate flow-accelerated corrosion of carbon steels in nuclear power plants
	2016

[12]	Characterization of Nanostructured NbSi2 Intermetallic Coatings Obtained by Plasma Spraying of Mechanically Alloyed Powders
	Journal of Thermal Spray Technology, 2015

[13]	Characterization of Nanostructured NbSi 2 Intermetallic Coatings Obtained by Plasma Spraying of Mechanically Alloyed Powders
	2015

[14]	Çelik Dişli Sondaj Matkaplarında Takım Ömrünün Artırılması
	2015

[1]	Comparative Study into Microstructural and Mechanical Characterization of HVOF-WC-Based Coatings Crystals, 2022 DOI:10.3390/cryst12070969

[2]	Effect of the coating material compositions on the life of gas turbine hot section components ADVANCED TRENDS IN MECHANICAL AND AEROSPACE ENGINEERING: ATMA-2019, 2021 DOI:10.1063/5.0038314

[3]	AISI D2 punch head damage: Fatigue and wear mechanism Engineering Failure Analysis, 2021 DOI:10.1016/j.engfailanal.2021.105676

[4]	Influence of plasma spraying parameters on microstructure and corrosion resistance of Cr3C2-25NiCr cermet carbide coating Anti-Corrosion Methods and Materials, 2019 DOI:10.1108/ACMM-09-2018-2003

[5]	A comparative study on slurry erosion behavior of HVOF sprayed coatings DYNA, 2017 DOI:10.15446/dyna.v84n202.56542

[6]	Micro-Abrasion Wear Behavior of Thermal-Spray-Coated Steel Tooth Drill Bits Acta Physica Polonica A, 2016 DOI:10.12693/APhysPolA.130.217