The Mathematical Simulation of Brush Drums in a Dual Saw Cylinder Chamber Gin for the Purpose of Increasing the Quantity of Captured Cotton Fiber from Saw

World Journal of Mechanics

ISSN Print: 2160-049X
ISSN Online: 2160-0503
www.scirp.net/journal/wjm
E-mail: [email protected]

Citations

Journals Menu

Guidelines & Policies

"The Mathematical Simulation of Brush Drums in a Dual Saw Cylinder Chamber Gin for the Purpose of Increasing the Quantity of Captured Cotton Fiber from Saw"
written by Azizov Shuhrat Mamatovich, Karimov Abdusamat, Peter Arras,
published by World Journal of Mechanics, Vol.3 No.1, 2013

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Kolosnik matritsa modelini raqamli uskuna yordamida tayyorlash ketma ketligini loyihalash
	Research and Education, 2023

[2]	PAXTANI YANGI QUVURLI QURITISH USKUNASINI MODELLASHTIRISH
	RESEARCH AND EDUCATION, 2023

[3]	KOLOSNIK MATRITSA MODELINI NX1. 2 DASTURI YORDAMIDA TAYYORLASH
	Innovative Development in Educational Activities, 2023

[4]	BIR KAMERALI IKKI SILINDIRLI JINLARDA TOLANI UNUMDORLIGI BO'YICHA MATEMATIK MODELLASHTIRISH
	Journal of new century innovations, 2022

[5]	ЭНЕРГОЭФФЕКТИВНЫЙ МЕТОД МОДЕЛИРОВАНИЕ И ИЗГОТОВЛЕНИЕ НОВОГО ВЫСОКО ПРОИЗВОДИТЕЛЬНОГО ПРОФИЛЯ ЗУБА ПИЛЫ
	O'ZBEKISTONDA FANLARARO …, 2022

[6]	Calculation Energy of Efficiency New Ginning Machine
	Engineering, 2022

[7]	Statically Analysis of the Stress State of Saw Gins Consisting of 90, 100, 110, 120, 130 Saws
	Engineering, 2022

[8]	Calculation of Cost-Effectiveness of Molds Made of Aluminum, MDF (Medium Density Fiberboard) and Steel
	Engineering, 2022

[9]	The effective methods of separating waste from cotton
	AIP Conference …, 2022

[10]	BIR KAMERALI IKKI SILINDRLI JINDA TOLANING SHIKASTLANISHI BO'YICHA OPTIMAL MATEMATIK MODELL TANLASH ПОЛУЧЕНИЯ САМОЙ …
	O'ZBEKISTONDA …, 2022

[11]	KOLOSNIK PUANSON MODELINI CAD YORDAMIDA TAYYORLASH. ПОДГОТОВКА МОДЕЛИ ПУАНСОНА КОЛОСНИКА С ИСПОЛЬЗОВАНИЕМ CAD …
	… INNOVATSIYALAR VA ILMIY …, 2022

[12]	The modelling and introductions of new type ribs of lattice of the two cylinder of gin
	2021

[13]	Analysis of Namangan 77 cotton in production line with different saw gins for short fiber yield
	2021

[14]	RESULTS OF THE EXIT OF AVERAGE LENGTH FIBER COTTON ON PRIMARY FACTORIES WITH DIFFERENT SAW GINS
	Universum: технические науки, 2021

[15]	THE CREATION OF ANIMATED ACTIONS BY MEANS OF MATHEMATICAL MODEL FOR THE TECHNOLOGICAL PROCESS
	2018

[16]	Theoretical Study of Movements Trash in Cotton Lobules In Cleaner Small and Large Trash
	2018

[17]	The Definition Technological Parametres of One Chamber Two Saw Cylinders Gin
	2018

[18]	Investigation of Separating Small Impurities and Heavy Compounds Using the Cotton Separator Equipment
	2017

[19]	The Energy Effective Method of Modeling and Manufacturing of New Profile Teeth of Saw
	2017

[20]	Study of the Dynamics of Cotton Seeds Movement under the Influence of Air Flow
	J Textile Sci Eng, 2017

[21]	The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin
	2016

[22]	Theoretical Analysis of Gin Cylinder for Simulating Dual Saw Cylinder Chamber Gin for Increasing Wear Proof, Energy Efficient, Saving Resources
	World Journal of Engineering and Technology, 2015

[23]	Mathematical Modeling Of the Technological Processes Original Processing Of Cotton
	2014

[24]	Theoretical and Experimental Studies of the Effect of Inclined Scraper on Removal of Raw Cotton from Mesh Surface
	World Journal of Mechanics, 2014

[1]	The effective methods of separating waste from cotton 2021 ASIA-PACIFIC CONFERENCE ON APPLIED MATHEMATICS AND STATISTICS, 2022 DOI:10.1063/5.0090081

[2]	Calculation Energy of Efficiency New Ginning Machine Engineering, 2022 DOI:10.4236/eng.2022.144016

[3]	Calculation of Cost-Effectiveness of Molds Made of Aluminum, MDF (Medium Density Fiberboard) and Steel Engineering, 2022 DOI:10.4236/eng.2022.148025

[4]	Statically Analysis of the Stress State of Saw Gins Consisting of 90, 100, 110, 120, 130 Saws Engineering, 2022 DOI:10.4236/eng.2022.148026

[5]	The modelling and introductions of new type ribs of lattice of the two cylinder of gin E3S Web of Conferences, 2021 DOI:10.1051/e3sconf/202127307020

[6]	Analysis of Namangan 77 cotton in production line with different saw gins for short fiber yield E3S Web of Conferences, 2021 DOI:10.1051/e3sconf/202127307021

[7]	Theoretical Analysis of Gin Cylinder for Simulating Dual Saw Cylinder Chamber Gin for Increasing Wear Proof, Energy Efficient, Saving Resources World Journal of Engineering and Technology, 2015 DOI:10.4236/wjet.2015.33010

[8]	Theoretical and Experimental Studies of the Effect of Inclined Scraper on Removal of Raw Cotton from Mesh Surface World Journal of Mechanics, 2014 DOI:10.4236/wjm.2014.412036

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

World Journal of Mechanics

World Journal of Mechanics

Journals Menu

Guidelines & Policies

Home

About SCIRP

Service

Policies