Parametric Tolerance Analysis of Mechanical Assembly Using FEA and Cost Competent Tolerance Synthesis Using Neural Network

ISSN Print: 1945-3116
ISSN Online: 1945-3124
www.scirp.net/journal/jsea
E-mail: [email protected]

Citations

"Parametric Tolerance Analysis of Mechanical Assembly Using FEA and Cost Competent Tolerance Synthesis Using Neural Network"
written by Govindarajalu Jayaprakash, Karuppan Sivakumar,
published by Journal of Software Engineering and Applications, Vol.3 No.12, 2010

has been cited by the following article(s):

[1]	Genauigkeitsgrenzen modularer Betontragwerke–Teil 1: Beschreibung von geometrischen Abweichungen infolge Schwinden
	Beton‐und …, 2022

[2]	An intelligent constitutive and collaborative framework by integrating the design, inspection and testing activities using a cloud platform
	2020

[3]	From tolerance allocation to tolerance-cost optimization: a comprehensive literature review
	2020

[4]	Ontological model-based optimal determination of geometric tolerances in an assembly using the hybridised neural network and Genetic algorithm
	2019

[5]	Tolerance Analysis of Surface-to-Surface Contacts Using Finite Element Analysis
	Procedia CIRP, 2018

[6]	考虑变形影响的公差分析及其研究进展
	机械工程学报, 2018

[7]	Contact Variation Optimization for Surface-to-Surface Contacts
	2017

[8]	Scalable design synthesis for automotive assembly system
	2015

[9]	多體機械系統之公差優化設計
	成功大學機械工程學系學位論文, 2015

[10]	Reliability Analysis on Gear Contact Fatigue Strength Considering the Effect of Tolerance
	Open Mechanical Engineering Journal, 2014

[1]	A combinatorial optimization approach for geometric tolerance design considering various taxonomies Engineering Optimization, 2024 DOI:10.1080/0305215X.2024.2367601

[2]	Genauigkeitsgrenzen modularer Betontragwerke – Teil 1: Beschreibung von geometrischen Abweichungen infolge Schwinden Beton- und Stahlbetonbau, 2022 DOI:10.1002/best.202200010

[3]	An intelligent constitutive and collaborative framework by integrating the design, inspection and testing activities using a cloud platform International Journal of Computer Integrated Manufacturing, 2020 DOI:10.1080/0951192X.2020.1736712

[4]	From tolerance allocation to tolerance-cost optimization: a comprehensive literature review The International Journal of Advanced Manufacturing Technology, 2020 DOI:10.1007/s00170-020-05254-5

[5]	Ontological model-based optimal determination of geometric tolerances in an assembly using the hybridised neural network and Genetic algorithm Journal of Engineering Design, 2019 DOI:10.1080/09544828.2019.1605585

[6]	Tolerance Analysis of Surface-to-Surface Contacts Using Finite Element Analysis Procedia CIRP, 2018 DOI:10.1016/j.procir.2018.04.029