|
[1]
|
Toward novel AM feedstocks: Ultrasonically atomized 7075 and Al–Zn–Mg–Cu–Co–Cr–Mo powders
Powder Technology,
2026
DOI:10.1016/j.powtec.2025.121985
|
|
|
|
|
[2]
|
Mechanisms, Sensors, and Signals for Defect Formation and In Situ Monitoring in Metal Additive Manufacturing
Eng,
2026
DOI:10.3390/eng7030129
|
|
|
|
|
[3]
|
Technologies for production and treatment of powder materials in thermal plasma of electric arc discharge
Fine Chemical Technologies,
2026
DOI:10.32362/2410-6593-2026-21-1-120-135
|
|
|
|
|
[4]
|
Adaptive Powder Behavior Model for Dispersion and Recovery in Metal Additive Manufacturing
Powders,
2026
DOI:10.3390/powders5010008
|
|
|
|
|
[5]
|
Correlative multi-modal analysis and machine-learning-assisted interpretation of virgin and reused IN718 powders in laser powder bed fusion
Powder Technology,
2026
DOI:10.1016/j.powtec.2026.122399
|
|
|
|
|
[6]
|
Process optimization of Nb521 powder via radio-frequency plasma spherodization and its suitability for selective laser melting
International Journal of Refractory Metals and Hard Materials,
2026
DOI:10.1016/j.ijrmhm.2026.107742
|
|
|
|
|
[7]
|
Powder metallurgy in additive manufacturing: Trends, challenges, methods, materials, and emerging applications
Powder Technology,
2026
DOI:10.1016/j.powtec.2026.122420
|
|
|
|
|
[8]
|
Superficial and subsuperficial compositional and microstructural modification of additive manufactured AlSi10Mg via low-power, low speed laser surface remelting
The International Journal of Advanced Manufacturing Technology,
2026
DOI:10.1007/s00170-026-18001-z
|
|
|
|
|
[9]
|
A state-of-the-art review in metal additive manufacturing of medium entropy alloys: Recent trends and future perspectives
International Journal of Lightweight Materials and Manufacture,
2026
DOI:10.1016/j.ijlmm.2026.06.006
|
|
|
|
|
[10]
|
Metal Powder Recycling in Additive Manufacturing: A Review of Pathways and Opportunities
Metals,
2026
DOI:10.3390/met16080871
|
|
|
|
|
[11]
|
Formation of W–Y2O3 Spherical Composite Powders in a Thermal Plasma Flow
Advanced Engineering Materials,
2026
DOI:10.1002/adem.71062
|
|
|
|
|
[12]
|
Experimental investigations into corrosion behaviour of DMLS manufactured Ti6Al4V alloy in different biofluids for orthopedic implants
Materials Today Communications,
2025
DOI:10.1016/j.mtcomm.2024.111158
|
|
|
|
|
[13]
|
High-temperature oxidation behavior of gas-atomized CoCrFeNiCu high-entropy alloy powders
Applied Surface Science,
2025
DOI:10.1016/j.apsusc.2025.162561
|
|
|
|
|
[14]
|
Classification of Metallic Powder Morphology Using Traditional and Automated Static Image Analysis: A Comparative Study
Powders,
2025
DOI:10.3390/powders4020015
|
|
|
|
|
[15]
|
Additive manufacturing defects and its impact on metal corrosion: A review
Journal of Physics: Conference Series,
2025
DOI:10.1088/1742-6596/3061/1/012014
|
|
|
|
|
[16]
|
Integration of Circular Economy into Metal Additive Manufacturing: A Review of Ultrasonic Plasma Atomization for Producing Virgin and Recycled NiTi Powder
Shape Memory and Superelasticity,
2025
DOI:10.1007/s40830-025-00589-y
|
|
|
|
|
[17]
|
Metallic Powders for Additive Manufacturing
2024
DOI:10.1002/9781119908142.ch11
|
|
|
|
|
[18]
|
A numerical modeling framework for predicting the effects of operational parameters on particle size distribution in the gas atomization process for Nickel-Silicon alloys
Powder Technology,
2024
DOI:10.1016/j.powtec.2024.119408
|
|
|
|
|
[19]
|
Numerical Simulation of Gas Atomization and Powder Flowability for Metallic Additive Manufacturing
Metals,
2024
DOI:10.3390/met14101124
|
|
|
|
|
[20]
|
Current Status and Challenges of Powder Bed Fusion-Based Metal Additive Manufacturing: Literature Review
Metals,
2023
DOI:10.3390/met13020424
|
|
|
|
|
[21]
|
Effect of powder recycling on inclusion content and distribution in AISI 316L produced by L-PBF technique
Journal of Materials Research and Technology,
2023
DOI:10.1016/j.jmrt.2023.02.017
|
|
|
|