A Study of the Mechanical Characteristics of a Mandibular Parasymphyseal Fracture with Internal Fixation Device Subject to Variable Bite Forces: Finite Element Analysis

ISSN Print: 2327-5081
ISSN Online: 2327-509X
www.scirp.net/journal/jbm
E-mail: [email protected]

Citations

"A Study of the Mechanical Characteristics of a Mandibular Parasymphyseal Fracture with Internal Fixation Device Subject to Variable Bite Forces: Finite Element Analysis"
written by Victor Caraveo, Scott Lovald, Tariq Khraishi,
published by Journal of Biosciences and Medicines, Vol.9 No.4, 2021

has been cited by the following article(s):

[1]	Isotropic and orthotropic mechanical properties of in vivo mandible model: Assessment of computational modelling
	International Journal of …, 2024

[2]	Biomechanical evaluation of a custom-made mandibular plate
	IOP Conference …, 2024

[3]	Abutment-bar structure connection geometry: An important design parameter for implant-supported bar-retained overdentures with cantilever extension
	Journal of Oral Implantology, 2023

[4]	Simulated Analysis Ti-6Al-4V Plate and Screw as Transverse Diaphyseal Fracture Implant for Ulna Bone
	Journal of …, 2022

[5]	IMPLEMENTATION OF THE NEWLY DESIGNED AND EXPERIMENTALLY VALIDATED LOCKING SYSTEM FOR TREATMENT OF FAVORABLE AND UNFAVORABLE MANDIBULAR FRACTURES
	THESIS, 2022

[6]	IMPLEMENTATION OF THE NEWLY DESIGNED AND EXPERIMENTALLY VALIDATED LOCKING SYSTEM FOR TREATMENT OF FAVORABLE AND …
	2022

[7]	PROGETTAZIONE DI DISPOSITIVI MEDICI INNOVATIVI PER PATOLOGIE ORTOPEDICHE

[1]	A Model for Different Internal Fixation of the Mandibular Condyle Fractures Biomedical Materials & Devices, 2025 DOI:10.1007/s44174-025-00450-x

[2]	Biomechanical evaluation of a custom-made mandibular plate IOP Conference Series: Materials Science and Engineering, 2024 DOI:10.1088/1757-899X/1306/1/012017

[3]	Mandibular biomechanics rehabilitated with different prosthetic restorations under normal and impact loading scenarios BMC Oral Health, 2024 DOI:10.1186/s12903-024-04681-0

[4]	Performance evaluation of a low-cost Ti-Mo-Fe (TMF8) as a replacement for Ti-6Al-4V for internal fixation implants used in mandibular angular fractures: a finite element analysis study Journal of Materials Science: Materials in Medicine, 2024 DOI:10.1007/s10856-024-06842-7

[5]	Abutment-Bar Structure Connection Geometry: An Important Design Parameter for Implant-Supported Bar-Retained Overdentures With Cantilever Extension Journal of Oral Implantology, 2023 DOI:10.1563/aaid-joi-D-22-00055

[6]	Simulated Analysis Ti-6Al-4V Plate and Screw as Transverse Diaphyseal Fracture Implant for Ulna Bone Journal of Biomimetics, Biomaterials and Biomedical Engineering, 2022 DOI:10.4028/p-63a93r