Design of Steam Turbine for Electric Power Production Using Heat Energy from Palm Kernel Shell

ISSN Print: 2327-588X
ISSN Online: 2327-5901
www.scirp.net/journal/jpee
E-mail: [email protected]

Citations

"Design of Steam Turbine for Electric Power Production Using Heat Energy from Palm Kernel Shell"
written by Buliaminu Kareem, Theophilus Ewetumo, Michael K. Adeyeri, Akinlabi Oyetunji, O. E. Olatunji,
published by Journal of Power and Energy Engineering, Vol.6 No.11, 2018

has been cited by the following article(s):

[1]	Steam Turbine: A Review on Some Critical Parts
	2024

[2]	A multicriteria decision based assessment of agricultural solid wastes as potential feedstock for electricity generation in Nigeria
	Journal of Fundamental …, 2021

[3]	The Evaluation of the Power Output of a Locally-Developed Micro Thermal Power Plant in Nigeria
	Ife Journal of Technology, 2021

[4]	DT-II: Digital twin enhanced Industrial Internet reference framework towards smart manufacturing
	2020

[5]	Design and Construction of an Electrically Operated Paint Mixing Machine
	2020

[6]	SIMULASI PROSES DAN ANALISIS EXERGY PEMBANGKIT LISTRIK TENAGA PANAS BUMI (PLTPB) DI KAWASAN GEOTHERMAL X DENGAN MENGGUNAKAN …
	2020

[7]	Improving the Safety of Power Plants by Developing a Digital Twin and an Expert System for Adaptive-Predictive Analysis of the Operability of Gas Turbine Units
	2020

[8]	Felsics. com


[9]	Nuclear Power Plant Definition, History, Principle, and Components

[1]	Analysis of micro steam turbine for electricity generation using heat recovery from municipal solid waste incineration International Journal of Energy and Water Resources, 2025 DOI:10.1007/s42108-025-00366-8

[2]	Investigation of root cause failure analysis of steam turbine rotor disc in petrochemical industry in Indonesia PROCEEDINGS OF THE 10TH INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY ENGINEERING AND APPLICATION 2022 (ICSEEA2022), 2024 DOI:10.1063/5.0214416

[3]	DT-II:Digital twin enhanced Industrial Internet reference framework towards smart manufacturing Robotics and Computer-Integrated Manufacturing, 2020 DOI:10.1016/j.rcim.2019.101881

Top