Improvement of the Cycle Performance of LiNi0.5Mn1.5O4 Cathode Active Materials by In-Situ Coating with Poly(3,4-Ethylenedioxythiophene)

ISSN Print: 2327-588X
ISSN Online: 2327-5901
www.scirp.net/journal/jpee
E-mail: [email protected]

Citations

"Improvement of the Cycle Performance of LiNi_0.5Mn_1.5O₄ Cathode Active Materials by In-Situ Coating with Poly(3,4-Ethylenedioxythiophene)"
written by Jinfeng Liu, Jing Xu,
published by Journal of Power and Energy Engineering, Vol.5 No.12, 2017

has been cited by the following article(s):

[1]	Soft Carbon Integration for Prolonging the Cycle Life of LiNi0.5Mn1.5O4 Cathode
	ACS Applied Energy …, 2023

[2]	Performance comparison of LMNO cathodes produced with pullulan or PEDOT: PSS water-processable binders
	Energies, 2022

[3]	Conformal Conducting Polymer Shells on V2O5 Nanosheet Arrays as a High‐Rate and Stable Zinc‐Ion Battery Cathode
	Advanced Materials …, 2019

[1]	Conductive Polymers in Lithium-Ion Battery Cathodes: Enhancing Performance and Stability Polymers, 2026 DOI:10.3390/polym18040429

[2]	Investigation of the possibility of using water-based binders with conducting polymer for high-voltage LiNi0.5Mn1.5O4 cathodes Electrochimica Acta, 2025 DOI:10.1016/j.electacta.2025.147200

[3]	Soft Carbon Integration for Prolonging the Cycle Life of LiNi0.5Mn1.5O4 Cathode ACS Applied Energy Materials, 2023 DOI:10.1021/acsaem.3c01340

[4]	Performance Comparison of LMNO Cathodes Produced with Pullulan or PEDOT:PSS Water-Processable Binders Energies, 2022 DOI:10.3390/en15072608

[5]	Conformal Conducting Polymer Shells on V2 O5 Nanosheet Arrays as a High-Rate and Stable Zinc-Ion Battery Cathode Advanced Materials Interfaces, 2018 DOI:10.1002/admi.201801506