Advanced Statistical Analysis for Relationships between Particle Morphology (Size and Shape) and Shear (Static and Dynamic) Characteristics of Sands

ISSN Print: 2156-8359
ISSN Online: 2156-8367
www.scirp.net/journal/ijg
E-mail: [email protected]

Citations

"Advanced Statistical Analysis for Relationships between Particle Morphology (Size and Shape) and Shear (Static and Dynamic) Characteristics of Sands"
written by Devapriya Chitral Wijeyesekera, Alvin John Lim Meng Siang, Ahmad Shukri Bin Yahaya,
published by International Journal of Geosciences, Vol.4 No.10A, 2013

has been cited by the following article(s):

[1]	Numerical simulation of the bentonite-bonded sand mould compaction process using micro-mechanical parameter relationships
	Canadian Metallurgical Quarterly, 2024

[2]	Analysis of the Aggregate Production Process with Different Geometric Properties in the Light Fraction Separator
	Materials, 2022

[3]	Geomorphology and stability analysis of the Charonnier landslide using remote sensing and in situ observations
	2019

[4]	Impact of Oriented Clay Particles on X-Ray Spectroscopy Analysis
	IOP Conference Series: Materials Science and Engineering, 2016

[5]	Numerical modelling of the behaviour of stone and composite stone columns in soft soils
	2015

[6]	Comparison of Methods Determining the Angularity of Aggregate Particles
	Applied Mechanics and Materials, 2015

[7]	Parametry kszta?tu ziaren gruntowych oraz analityczne sposoby ich wyznaczania
	Przegl?d Geologiczny, 2014

[8]	Parametry kształtu ziaren gruntowych oraz analityczne sposoby ich wyznaczania
	2014

[1]	An experimental investigation of the combined effects of injection flow rate and confining pressure on fault gouge permeability in CO2 storage conditions Journal of Structural Geology, 2026 DOI:10.1016/j.jsg.2026.105731

[2]	Numerical simulation of the bentonite-bonded sand mould compaction process using micro-mechanical parameter relationships Canadian Metallurgical Quarterly, 2024 DOI:10.1080/00084433.2024.2306028

[3]	Analysis of the Aggregate Production Process with Different Geometric Properties in the Light Fraction Separator Materials, 2022 DOI:10.3390/ma15124046

[4]	Impact of Oriented Clay Particles on X-Ray Spectroscopy Analysis IOP Conference Series: Materials Science and Engineering, 2016 DOI:10.1088/1757-899X/136/1/012012

[5]	Comparison of Methods Determining the Angularity of Aggregate Particles Applied Mechanics and Materials, 2015 DOI:10.4028/www.scientific.net/AMM.797.246