Evaluation of Mechanical and Microstructural Properties of <i>α</i>-Brass Alloy Produced from Scrap Copper and Zinc Metal through Sand Casting Process

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.net/Journal/jmmce
E-mail: [email protected]

Citations

Journals Menu

Guidelines & Policies

"Evaluation of Mechanical and Microstructural Properties of α-Brass Alloy Produced from Scrap Copper and Zinc Metal through Sand Casting Process"
written by Edward E. Igelegbai, Oluwaseun A. Alo, Adefemi O. Adeodu, Ilesanmi A. Daniyan,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.1, 2017

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Microstructure evolution and ductility improvement mechanism of Fe-containing recycled brass alloy after Mn addition
	Materials Chemistry and Physics, 2024

[2]	Characteristics of anthropogenic pollution in the atmospheric air of south-western Svalbard (Hornsund, spring 2019)
	Michalik, M Worosz… - Water, 2024

[3]	Optimization of Process Parameters and Additives for Improved Part Quality in Sand Casting: An Overview
	Journal of The Institution …, 2024

[4]	Effect of cooling media variations on physical properties and hardness of brass (CuZn) casting products using CO2 sand mold
	AIP Conference …, 2024

[5]	Effect of specimen profile radius of brass, aluminium and PVC materials on predicted fatigue life
	AIP Conference …, 2023

[6]	Development and mechanical evaluation of alpha brass (Cu-Zn alloy) for industrial applications
	AIP Conference …, 2023

[7]	An assessment of new materials that are light weight for use in automobiles to improve fuel efficiency
	2023

[8]	Influence of Alloying Element and Ageing on Microstructure and Dry Sliding Wear Behaviour of Cu-Zn-xNi Alloy.
	Journal of Mines …, 2022

[9]	Development, Microstructural and Mechanical Analysis of Cu-Zn Alloy Produced by Sand Casting Process
	International Conference on …, 2022

[10]	Impacts of tin and germanium on corrosion and erosion-corrosion behavior of 60Cu–40Zn alloys
	AIP Conference Proceedings, 2022

[11]	Evaluation of Steel and Tungsten Carbide Cobalt (WC 8Co) 5.56 x 45 mm Caliber Projectile Penetration into Silicon Carbide (SiC) Experiment and Numerical …
	Defence Science …, 2022

[12]	Corrosion of Brass Fishing Vessel Propeller in Artificial Seawater
	Journal of Industrial …, 2022

[13]	Influence of Alloying Element and Ageing on Microstructure and Dry Sliding Wear Behaviour of Cu-Zn-xNi Alloy
	Journal of Mines …, 2022

[14]	Mikrostrukturna analiza CuAlMn legure s prisjetljivosti oblika
	2022

[15]	Numerical modeling and experimental investigation of brass wire forming by friction stir back extrusion
	2021

[16]	Brass Wire Forming By Friction Stir Back Extrusion: Numerical Modeling and Experiment
	2021

[17]	Optimization of microstructural and mechanical properties of brass wire produced by friction stir extrusion using Taguchi method
	2021

[18]	Process Design, Development and Mechanical Analysis of Cu-Zn Alloy Produced by Sand Casting Process
	2021

[19]	Evaluation of Dihedral Angle Twin Boundaries in Cu10 wt% Zn Alloy Using Atomic Force Microscopy
	2021

[20]	RESEARCH PAPER IMPACT OF COLD PLASTIC DEFORMATION AND THERMAL POST-TREATMENT ON THE PHYSICAL PROPERTIES OF COPPER …
	ACTA METALLURGICA SLOVACA, 2021

[21]	Investigations of microstructure and mechanical properties of brass alloys produced by sand casting method at different casting temperatures
	2020

[22]	A comparative study of chemical and physical properties of copper and copper alloys affected by acidic, alkaline and saline environments
	2020

[23]	Influence of Aluminium and Zinc Additives on the Physical and Thermal Behaviour of Cast Copper
	2020

[24]	Archaeometric study of the historic terrazzo pavement of Prince Mohamed Ali Museum, Cairo, Egypt
	2020

[25]	Physical Behaviour of Thermally Affected Bronze and Brass
	2020

[26]	The effect of annealing process and mold variations to failure time of CuZncast alloy by dynamic load
	International Journal, 2020

[27]	Analysis of the Absorption Phenomenon Through the Use of Finite Element Method
	2019

[28]	Metal analysis of horse bits using X-ray fluorescence (XRF)
	2019

[29]	The Influence of the Precipitation Heat Treatment Temperature on the Metallurgical, Microstructure, Thermal Properties, and Microhardness of an Alpha Brass
	2018

[30]	Effect of Growth Velocity and Zn Content on Microhardness in Directionally Solidified Al-Zn Alloys
	2018

[31]	Characteristic Features of Anthropogenic Pollution in the Atmospheric Air at Hornsund in the Spring of 2019 (Svalbard, High-Arctic)

[1]	Impact Management of Different Types of Extrusion on Microstructural, Mechanical and Functional Properties of Brass Alloys: a Review Revista de Gestão e Secretariado, 2025 DOI:10.7769/gesec.v16i7.5047

[2]	Influence of pre-existing stacking fault on the mechanical and microstructural behavior of Cu–Zn alloys—a molecular dynamics study Journal of King Saud University – Engineering Sciences, 2025 DOI:10.1007/s44444-025-00079-7

[3]	Effect of cooling media variations on physical properties and hardness of brass (CuZn) casting products using CO2 sand mold PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON ENGINEERING, TECHNOLOGY, AND INDUSTRIAL APPLICATIONS 2021 (8th ICETIA 2021): Engineering, Environment, and Health: Exploring the Opportunities for the Future, 2024 DOI:10.1063/5.0195719

[4]	Optimization of Process Parameters and Additives for Improved Part Quality in Sand Casting: An Overview Journal of The Institution of Engineers (India): Series D, 2024 DOI:10.1007/s40033-024-00686-9

[5]	Development and mechanical evaluation of alpha brass (Cu-Zn alloy) for industrial applications TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY: TMREES22Fr, 2023 DOI:10.1063/5.0129248

[6]	Effect of specimen profile radius of brass, aluminium and PVC materials on predicted fatigue life 6TH INTERNATIONAL CONFERENCE ON CIVIL ENGINEERING FOR SUSTAINABLE DEVELOPMENT (ICCESD 2022), 2023 DOI:10.1063/5.0129952

[7]	Impacts of tin and germanium on corrosion and erosion-corrosion behavior of 60Cu–40Zn alloys 3RD INTERNATIONAL CONFERENCE ON ENERGY AND POWER, ICEP2021, 2022 DOI:10.1063/5.0108474

[8]	Influence of Alloying Element and Ageing on Microstructure and Dry Sliding Wear Behaviour of Cu-Zn-xNi Alloy Journal of Mines, Metals and Fuels, 2022 DOI:10.18311/jmmf/2022/31962

[9]	Absorption Spectroscopy - From Fundamentals to Realms of Applications [Working Title] 2019 DOI:10.5772/intechopen.86924

[10]	Effect of Growth Velocity and Zn Content on Microhardness in Directionally Solidified Al-Zn Alloys Materials Research, 2018 DOI:10.1590/1980-5373-mr-2018-0337

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Guidelines & Policies

Home

About SCIRP

Service

Policies