Identification of Optimum Composition and Mechanical Properties of Al-Ni Metal Matrix Composite

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.net/Journal/jmmce
E-mail: [email protected]

Citations

"Identification of Optimum Composition and Mechanical Properties of Al-Ni Metal Matrix Composite"
written by Manoj Kumar Pal, Simranjeet Singh Sandhu, Rohan Kalia, Arka Ghosh,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.4, 2015

has been cited by the following article(s):

[1]	Effect of strain rate on fractography texture descriptor of AA6063/(Si3N4) x/(Cu (NO3) 2) y (x= 12%, y= 2–6%) composite after multiple ECAP passes: second …
	Journal of Materials …, 2023

[2]	Mechanical characterization and analysis of tensile fracture modes of ultrasonically stir cast Al6082 composites reinforced with Cu powder premixed Metakaolin …
	Frattura e Integrita …, 2022

[3]	Evaluation of mechanical and wear properties of AA6063/(Si3N4) 6%–12%/(CuN2O6) 2%–4% composite via PM route and optimization through robust design …
	2022

[4]	A Concise View Point on Effects of Agro and Industrial Waste as Reinforcement on Characteristic Properties of Aluminum Alloy-Based Metal Matrix Composites
	2021

[5]	Corrosion Behavior of Al-Ni Matrix Composites in a dilute sodium chloride solution
	Technology Reports of Kansai University, 2021

[6]	Study on hot deformation behavior and workability of stir-cast Al6063-6wt.% steelp based composites
	Journal of the …, 2021

[7]	Applicability of metallic reinforcements for mechanical performance enhancement in metal matrix composites: a review
	Arab Journal of Basic and Applied Sciences, 2019

[8]	FABRICATION OF AL2024WITH SILICON CARBIDE REINFORCED COMPOSITE BY USING CENTRIFUGALLY ATOMISED CASTING

[1]	Development and Characterization of Functionally Graded Al2024-Ni Metal Matrix Composite Leaf Plate under T3 Heat Treatment MAPAN, 2025 DOI:10.1007/s12647-025-00872-4

[2]	Evaluation of mechanical and wear properties of AA6063/(Si3N4)6%–12% /(CuN2O6)2%–4% composite via PM route and optimization through robust design technique Materials Research Express, 2022 DOI:10.1088/2053-1591/ac7d41

[3]	Study on hot deformation behavior and workability of stir-cast Al6063-6wt.% steel p based composites Journal of the Mechanical Behavior of Materials, 2021 DOI:10.1515/jmbm-2021-0012

[4]	Applicability of metallic reinforcements for mechanical performance enhancement in metal matrix composites: a review Arab Journal of Basic and Applied Sciences, 2019 DOI:10.1080/25765299.2019.1628689