Effects of Additives on Some Selected Properties of Base Sand

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.net/Journal/jmmce
E-mail: [email protected]

Citations

"Effects of Additives on Some Selected Properties of Base Sand"
written by Saliu Ojo Seidu, Bolarinwa Johnson Kutelu,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.5, 2014

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Enhancing Dimensional Geometry Casting using Computer Modeling
	E3S Web of …, 2024

[2]	Analisa Pengaruh Penambahan Seacoal Terhadap Karakteristik Pasir Cetak Greensand
	Perwira Journal of …, 2024

[3]	Katmanlı imalat yöntemiyle üretilen kum döküm kalıplarının mekanik özelliklerine baskı parametrelerinin etkilerinin incelenmesi
	2023

[4]	Organobentonite Binder for Binding Sand Grains in Foundry Moulding Sands
	Materials, 2023

[5]	Optimizing Green Strength of Foundry Sand Using Natural Starch as Additive
	2022

[6]	The Effects of Reinforcing Sand Mould with Coconut Pod Ashes on Mechanical and Microstructural Properties of Aluminium Alloy
	Journal of Multidisciplinary …, 2022

[7]	A review on the effects of ceramic sand particles on most casting defects
	Assafa… - Journal of Ceramic …, 2022

[8]	Study on Partial Replacement of Silica Sand With Alternatives and Its Effect on Sand Mould and Casting Properties.
	Journal of Mines, Metals & Fuels, 2022

[9]	Optimization of Aluminum Sand Casting process parameters on RSM and ANN methods
	Journal of Engineering Research, 2021

[10]	Investigating the shear and compressive behaviour of the pine wood ash casting sand
	2021

[11]	Investigating the effect of additives in molding sand on mechanical properties of casted ZAMAK-3 alloy
	2021

[12]	Technological Properties of Thermo-insulating Moulding Sands with Organic Binder
	2020

[13]	Parametric Optimization of Permeability of Green Sand Mould Using ANN and ANFIS Methods
	2020

[14]	Characterization of Southwestern Nigeria River Sand for foundry use
	2020

[15]	Effect of variation of different additives on some selected properties of silica sand mould for aluminium castings
	2020

[16]	Investigations on the suitability of banana peel powder as an alternative additive in synthetic green sand moulding system
	2020

[17]	Improvement in shear strength characteristics of desert sand using shredded plastic waste
	2020

[18]	Comparison Study on Four Types Mathematical Model for Sand-Casting Process
	2020

[19]	Performance Analysis of Cow Dung as an Eco-Friendly Binder and Additive Material for Sustainable Moulding and Casting
	2019

[20]	Experimental Study of Optimization of Dry Compressive Strength of Groundnut Shell Ash and Ant Hill Powder-Bonded Sand for Foundry Application
	World Journal of Innovative Research, 2019

[21]	A State-of-the-Art Review on Manufacturing and Additive Influences on Sand-Cast Components
	2019

[22]	Optimization of Moulding Composition for Quality Improvement of Sand Casting
	2018

[23]	Study of the Effect of Nano-silica Particles on Resin-Bonded Moulding Sand Properties and Quality of Casting
	Silicon, 2018

[24]	Experimental study of the feasibility of using groundnut shell ash and ant hill powder in foundry application
	Journal of the Chinese Advanced Materials Society, 2018

[25]	Investigation on Influence of Naturally Available Additives on Green Sand Mould Properties-A Case Study
	2017

[26]	Effect of Different Additives on Some Selected Properties of Green Sand Mould
	2017

[27]	Desenvolvimento de procedimento para otimizar o processo de moldação em areia verde
	2017

[28]	A REVIEW ON SAND CASTING PROCESS
	2016

[29]	INVESTIGATION OF THE SUITABILITY OF IYOLOKO CLAY AS A BINDING MATERIAL FOR FOUNDRY APPLICATION
	International Journal of Capacity Building in Education and Management (IJCBEM), 2016

[30]	Novas formulações de areias de macho para processo Hot Box
	2016

[31]	Effect of Wood Flours on Moulding Sand Properties
	2016

[32]	Freitas
	2016

[33]	EFFECT OF FLY ASH ADDITION ON SOME FOUNDRY PROPERTIES OF GWANGE RIVER SAND

[1]	Comparison of Abrasion Resistance and Surface Roughness of Foundry Patterns Produced from GG25 and GGG50 Grade Cast Iron Brilliant Engineering, 2026 DOI:10.36937/ben.2026.41143

[2]	Enhancing Dimensional Geometry Casting using Computer Modeling E3S Web of Conferences, 2024 DOI:10.1051/e3sconf/202449101005

[3]	Optimization of Aluminum Sand Casting process parameters on RSM and ANN methods Journal of Engineering Research, 2023 DOI:10.36909/jer.12949

[4]	Advancement in Materials, Manufacturing and Energy Engineering, Vol. II Lecture Notes in Mechanical Engineering, 2022 DOI:10.1007/978-981-16-8341-1_37

[5]	Study on Partial Replacement of Silica Sand With Alternatives and Its Effect on Sand Mould and Casting Properties Journal of Mines, Metals and Fuels, 2022 DOI:10.18311/jmmf/2022/31961

[6]	Investigations on the suitability of banana peel powder as an alternative additive in synthetic green sand moulding system International Journal of Cast Metals Research, 2020 DOI:10.1080/13640461.2020.1796294

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Guidelines & Policies

Home

About SCIRP

Service

Policies