Effect of Draw Ratio and Sheet Thickness on Earing and Drawability of Al 1200 Cups

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.net/Journal/jmmce
E-mail: [email protected]

Citations

"Effect of Draw Ratio and Sheet Thickness on Earing and Drawability of Al 1200 Cups"
written by O.O. Oluwole, C.O. Anyaeche, O.V. Faola,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.5, 2010

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Investigation of consecutive two-stage hydrodynamic deep drawing of aluminum cylindrical cups
	Proceedings of the …, 2022

[2]	Investigation of the effect of blank holding force on Earing defect during circular deep drawing process through finite element analysis and experimentation using …
	NUMISHEET …, 2022

[3]	Витягування циліндричних деталей із не суцільного матеріалу
	2021

[4]	Finite Element Simulation of Deep Drawing Process to Minimize Earing
	International Journal of Mechanical and Mechatronics Engineering, 2017

[5]	Cylindrical Cup Manufacturing Using 12 mm Thick Circular Blanks of AISI 1040 Graded Medium Carbon Steel: an Innovative Approach
	ISIJ International, 2016

[6]	12 mm Thick Circular Blanks of Al-killed AISI 1020 Steel-Applied for Cylindrical Cup Manufacturing by Multistage Deep Drawing with Simultaneous Ironing
	2016

[7]	Multistage Cup Drawing of Thicker Blanks of Al-Killed AISI 1010 Steel: A Modified Approach
	Transactions of the Indian Institute of Metals, 2016

[8]	Grain Refinement in the Formability of Aluminium Thin Cup
	Materials Science Forum, 2014

[9]	Micro deep drawing of Aluminium foils AA1235
	2014

[10]	A micro deep drawing of ARB processed aluminium foil AA1235
	International Journal of Materials and Product Technology, 2013

[11]	EFFECT OF COLD ROLLING ON THE EARING FORMATION DURING DEEP DRAWING OF THE ASTM C22000 COPPER ALLOY
	NULL 2013

[12]	Prediction and minimisation of sheet thickness variation during deep drawing of micro/milli parts
	International Journal of Mechanical Sciences, 2013

[1]	Improvement of limiting drawing ratio of a SPCC steel using sequential action forming with inclined blank holder Discover Mechanical Engineering, 2025 DOI:10.1007/s44245-025-00135-1

[2]	Cylindrical Cup Manufacturing Using 12 mm Thick Circular Blanks of AISI 1040 Graded Medium Carbon Steel: an Innovative Approach ISIJ International, 2016 DOI:10.2355/isijinternational.ISIJINT-2015-675

[3]	Grain Refinement in the Formability of Aluminium Thin Cup Materials Science Forum, 2013 DOI:10.4028/www.scientific.net/MSF.773-774.166

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Guidelines & Policies

Home

About SCIRP

Service

Policies