Working Properties of Some Selected Refractory Clay Deposits in South Western Nigeria

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.net/Journal/jmmce
E-mail: [email protected]

Citations

"Working Properties of Some Selected Refractory Clay Deposits in South Western Nigeria"
written by J.A. Omotoyinbo, O.O. Oluwole,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.3, 2008

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Production and optimization of the refractory properties of blended Nigerian clay for high-temperature application; a non-stochastic optimization approach
	Functional …, 2023

[2]	Development of High-Strength Insulating Refractory Bricks Using Locally Sourced Materials
	Journal of Materials …, 2023

[3]	EFFECT OF ADDITIVES ON REFRACTORY PROPERTIES OF SOME SELECTED CLAY DEPOSITS IN NIGER STATE, NIGERIA
	2022

[4]	Development of Solar Operated Evaporative Refrigerating System
	Saudi J Eng Technol, 2022

[5]	Investigating the effect of hematite additive on the performance of clay barriers for radioactive waste disposals
	Bulletin of Engineering …, 2022

[6]	COMPOSITIONAL CHARACTERIZATION AND INDUSTRIAL APPLICATION OF KUTIGI CLAY OCCURRENCE, CENTRAL BIDA BASIN, NIGERIA
	2021

[7]	Fabrication and characterization of clay-polyethylene composite opted for shielding of ionizing radiation
	Crystals, 2021

[8]	Physicochemical and Minerological Evaluation of Clay Deposits in Parts of Buan, Southern Nigeria
	2021

[9]	Effects of Grog Additions on Some Refractory Properties of Raw (Abusoro) Kaolin Clay Deposit for Furnace Lining
	2020

[10]	The Effects of Kaolin and Bauxite Clay Mix Ratios on Physical and Thermal Properties of Refractory Bricks
	2020

[11]	Characterization and Modification of Clays from Selected Sites in Murang'a and Nyeri Counties Kenya for Assessing Refractory Applications
	2020

[12]	Adsorption of lead (II) ions from water solutions with natural zeolite and chamotte clay
	2020

[13]	Investigation of gamma ray shielding capability of fabricated clay-polyethylene composites using EGS5, XCOM and Phy-X/PSD
	2020

[14]	Instrumental Characterization of Pretoria Clay Soil by XRF, XRD and SEM
	2020

[15]	A comparative study of energy and exergy performances of a PCM-augmented cement and fired-brick Trombe wall systems
	2020

[16]	Composition, Geotechnical Characteristics and the Potential for Industrial Use of Some Clay Bodies in Obudu and its Environs, Southeastern Nigeria
	2020

[17]	Egyptian Cretaceous clay deposits: Insights on Mineralogy, Geochemistry, and Industrial uses
	2020

[18]	Production of Silver Coated Ceramic Filter Candle Using Locally Sourced Materials For Household Water Treatment
	2020

[19]	PHYSIOCHEMICAL ANALYSIS OF CLAY SAMPLES IN SOME PARTS OF SOUTHEASTERN NIGERIA
	African Journal of Environment and Natural Science Research, 2020

[20]	Chamotte clay sorbent for the extraction of lead and cadmium ions from aqueous solutions
	2019

[21]	Refractory Properties of Alumina/Silica Blend.
	2019

[22]	Neutron-shielding behaviour investigations of some clay-materials
	2019

[23]	Industrial Potentials of Ebiaji Clay from Ezza North Area of Ebonyi State, Nigeria
	2018

[24]	Improving the thermal and physical properties of fire clay refractory bricks by added magnesia
	AIP Conference Proceedings, 2018

[25]	Investigating the Refractory Property of Jalingo Clay Deposit
	2018

[26]	Nuclear Engineering and Technology
	2018

[27]	Investigation of gamma radiation shielding capability of two clay materials
	Nuclear Engineering and Technology, 2018

[28]	Characterization of Opi Clay for Refractory Applications
	International Journal of Scientific Research in Engineering, 2018

[29]	Investigating the Production Quality of Electrical Porcelain Insulators from Local Materials
	IOP Conference Series: Materials Science and Engineering, 2018

[30]	A Study of the Refractory Properties of Selected clay deposit in Chavakali, Kenya
	2018

[31]	Characterization Of Iboko And Nduage-Echara Clay Deposits In Ebonyi State, Nigeria For Refractory Applications.
	International Journal of Engineering Inventions, 2018

[32]	Alternative biomass furnace wall material from biomass furnace ash
	2017

[33]	Investigating the Effects of High Alumina Cement and Silica Sand on the Suitability of Ikere Ekiti Clay for Refractory Applications
	American Journal of Engineering Research, 2017

[34]	Investigating the effects of High Alumina Cement and Silca Sand on the suitability of Ikere Ekiti Clay for Refractory Application
	2017

[35]	A study of selected Kenyan anthill clays for production of refractory materials
	2017

[36]	A study of casting characteristics of some Nigerian clay slips for industrial production
	International Journal of Advanced Scientific Research, 2016

[37]	Development and testing of composite refractory bricks (a case study of selected Kenyan clays)
	2016

[38]	Adaptation of Odolewu Clay for Use as Refractory Material
	NULL 2014

[39]	Industrial Potentials of Adiabo Clay in Calabar Municipal of Cross River State, South-South Nigeria.
	akamaiuniversity, 2014

[40]	PROPERTYEVALUATION OF IGBARA-ODO CLAYFOR REFRACTORIES
	NULL 2014

[41]	Effects of Blending On Refractory Properties of Some Selected Local Clays in South Western Nigeria
	2014

[42]	Effect of Blending on Refractory Properties of some Selected Local Clays in South Western Nigeria
	2014

[43]	Viability of Some Kano-Nigerian Clays for Refractory Applications
	Applied Mechanics and Materials, 2013

[44]	Effect of High Alumina Cement on Selected Foundry Properties of Ant-Hill Clay
	Leonardo Electronic Journal of Practices and Technologies, 2012

[45]	Impact of swelling indices of Sokoto clays on the moulding properties of the clays in sand mixtures
	Journal of Minerals and Materials Characterization and Engineering, 2012

[46]	Effect of high alumina cement on selected foundry properties of anthill clay
	2012

[47]	铁路铸钢件湿型粘土砂铸造工艺优化及缺陷防治
	2011

[48]	Moulding properties of a Nigerian silica–clay mixture for foundry use
	Applied Clay Science, 2009

[49]	Functional Composites and Structures


[50]	Journal of Applied Material Science & Engineering Research


[51]	Physicochemical And Mineralogical Characterization Of Use Abat, Ibiono Ibom Clay For Industrial Application

[1]	A Tunguska Sized Airburst Destroyed Tall el-Hammam a Middle Bronze Age City in the Jordan Valley Near the Dead Sea (Expanded) Airbursts and Cratering Impacts, 2025 DOI:10.14293/ACI.2025.0003

[2]	Practical Exploration of the 'Open or Close' Concept: Evaluation of the Hygrothermal Performance of a Bioclimatic Innovation for Onion Bulb Preservation Advanced Engineering Forum, 2024 DOI:10.4028/p-uJlek4

[3]	The influence of replacement high alumina cement partially by white kaolin on the properties of refractory concrete that made from different types of aggregate THE INTERNATIONAL SCIENTIFIC CONFERENCE OF ENGINEERING SCIENCES AND ADVANCED TECHNOLOGIES, 2024 DOI:10.1063/5.0236500

[4]	Production and optimization of the refractory properties of blended Nigerian clay for high-temperature application; a non-stochastic optimization approach Functional Composites and Structures, 2023 DOI:10.1088/2631-6331/acc9fb

[5]	A comparative study of energy and exergy performances of a PCM-augmented cement and fired-brick Trombe wall systems International Journal of Ambient Energy, 2022 DOI:10.1080/01430750.2020.1718753

[6]	Investigating the effect of hematite additive on the performance of clay barriers for radioactive waste disposals Bulletin of Engineering Geology and the Environment, 2022 DOI:10.1007/s10064-022-02914-6

[7]	Fabrication and Characterization of Clay-Polyethylene Composite Opted for Shielding of Ionizing Radiation Crystals, 2021 DOI:10.3390/cryst11091068

[8]	A Tunguska sized airburst destroyed Tall el-Hammam a Middle Bronze Age city in the Jordan Valley near the Dead Sea Scientific Reports, 2021 DOI:10.1038/s41598-021-97778-3

[9]	Improving the thermal and physical properties of fire clay refractory bricks by added magnesia 2018 DOI:10.1063/1.5039212

[10]	Investigating the Production Quality of Electrical Porcelain Insulators from Local Materials IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/413/1/012076

[11]	Viability of Some Kano-Nigerian Clays for Refractory Applications Applied Mechanics and Materials, 2013 DOI:10.4028/www.scientific.net/AMM.315.477

[12]	Impact of Swelling Indices of Sokoto Clays on the Moulding Properties of the Clays in Sand Mixtures Journal of Minerals and Materials Characterization and Engineering, 2012 DOI:10.4236/jmmce.2012.1110109

[13]	Moulding properties of a Nigerian silica–clay mixture for foundry use Applied Clay Science, 2009 DOI:10.1016/j.clay.2009.05.001

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Guidelines & Policies

Home

About SCIRP

Service

Policies