The Use of Fuzzy Logic in Predicting Percentage (%) Dilution of Weld during Tig Welding Process

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.net/journal/msa
E-mail: [email protected]

Citations

"The Use of Fuzzy Logic in Predicting Percentage (%) Dilution of Weld during Tig Welding Process"
written by S. Nweze, J. Achebo,
published by Materials Sciences and Applications, Vol.10 No.5, 2019

has been cited by the following article(s):

[1]	Stelit Kaplamalı Valf Yüzeylerinin Oda Sıcaklığında ve 300℃'de Adhesif Aşınma Davranışının Bulanık Mantık Yöntemi İle Analizi.
	Journal of Polytechnic, 2024

[2]	Prediction of percentage dilution in AISI 1020 low carbon steel welds produced from tungsten inert gas welding
	Journal of Applied …, 2023

[3]	Optimization of TIG welding process parameters on 304 austenitic stainless steel sheet metal using fuzzy logic based Taguchi method
	Engineering Research Express, 2023

[4]	Experimental and Theoretical Investigations on Cold Metal Transfer Welds Using Neural Networks: A Computational Model of Weld Geometry
	2021

[5]	Prediction of tungsten inert gas welding process parameter using design of experiment and fuzzy logic
	2021

[6]	Analysis Of Adhesive Wear Behavior Of Stellite-Coated Valve Surfaces At Room Temperature and 300° C By Fuzzy Logic Method


[7]	PREDICTION AND CONTROL OF ARC TEMPERATURE ON WELD BEAD SURFACE PROFILE FORM FACTOR DURING TIG WELDING PROCESS OF MILD …

[1]	Multi-Objective Welding Optimization for AA5052 Using Taguchi-Fuzzy Approach SAE International Journal of Materials and Manufacturing, 2025 DOI:10.4271/05-18-03-0018

[2]	Optimization of TIG welding process parameters on 304 austenitic stainless steel sheet metal using fuzzy logic based Taguchi method Engineering Research Express, 2023 DOI:10.1088/2631-8695/acffa5

[3]	Prediction of tungsten insert gas welding process parameter using design of experiment and fuzzy logic Journal of Advances in Science and Engineering, 2021 DOI:10.37121/jase.v4i2.149