The Application of a Representative Volume Element (RVE) Model for the Prediction of Rice Husk Particulate-Filled Polymer Composite Properties

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.net/journal/msa
E-mail: [email protected]

Citations

"The Application of a Representative Volume Element (RVE) Model for the Prediction of Rice Husk Particulate-Filled Polymer Composite Properties"
written by Anil Saigal, Pandhita Pochanard,
published by Materials Sciences and Applications, Vol.10 No.1, 2019

has been cited by the following article(s):

[1]	Effect of production angle on low cycle fatigue performance of 3D printed auxetic Re-entrant sandwich panels
	Construction and Building Materials, 2024

[2]	Prediction of the Viscoelastic Properties of Corn Husk Film-Reinforced Epoxy Laminate Composites Using Modified Halpin–Tsai Model
	Journal of The Institution of Engineers (India) …, 2024

[3]	Thermomechanical properties prediction of wood-flour reinforced polymer composites using representative volume element (RVE)
	MATEC Web of Conferences, 2022

[4]	Analysis of mechanical properties of composite nanofibers constructed on rotating drum and collector plate
	21st Int. Sci. Conf. Eng …, 2022

[5]	Representative volume element based micromechanical modelling of rod shaped glass filled epoxy composites
	2021

[6]	Effect of hydroxyapatite filler concentration on mechanical properties of poly (methyl methacrylate) denture base
	2020

[7]	PROPRIEDADES FÍSICO-MECÂNICAS E TERMOFÍSICAS DE COMPOSITOS POLÍMEROS À BASE DE POLIPROPILENO SECUNDÁRIO PREENCHIDOS DE …
	Periódico Tchê …, 2020

[8]	NUMERICAL SIMULATION OF POLYMERIC COMPOSITE NANOFIBER MAT

[1]	Experimental and numerical investigation of LDPE/Cellulose composites towards use in food packaging INTERNATIONAL CONFERENCE ON INTELLIGENT SYSTEMS FOR SUSTAINABLE FUTURE (ISSF 2025): ISSF 2025, 2026 DOI:10.1063/5.0330744

[2]	Thermomechanical properties prediction of wood-flour reinforced polymer composites using representative volume element (RVE) MATEC Web of Conferences, 2022 DOI:10.1051/matecconf/202237003002

[3]	Representative volume element based micromechanical modelling of rod shaped glass filled epoxy composites SN Applied Sciences, 2021 DOI:10.1007/s42452-021-04261-9

[4]	Effect of hydroxyapatite filler concentration on mechanical properties of poly (methyl methacrylate) denture base SN Applied Sciences, 2020 DOI:10.1007/s42452-020-2546-1

Top