has been cited by the following article(s):
|
[1]
|
Impact of selenization with NaCl treatment on the physical properties and solar cell performance of crack-free Cu (In, Ga) Se 2 microcrystal absorbers
|
|
RSC …,
2024 |
|
|
|
|
[2]
|
Thermal analysis and polarized light microscopy as methods to study the increasing of the durability of PLA designed for 3D printing
|
|
2021 |
|
|
|
|
[3]
|
Role of lubricant with a plasticizer to change the glass transition temperature as a result improving the mechanical properties of poly (lactic acid) PLLA
|
|
2020 |
|
|
|
|
[4]
|
Influence of Annealing and Biaxial Expansion on the Properties of Poly(l-Lactic Acid) Medical Tubing
|
|
Polymers,
2019 |
|
|
|
|
[5]
|
The Influence of Low Shear Microbore Extrusion on the Properties of High Molecular Weight Poly(l-Lactic Acid) for Medical Tubing Applications
|
|
Polymers,
2019 |
|
|
|
|
[6]
|
The Influence of Low Shear Microbore Extrusion on the Properties of High Molecular Weight Poly (l-Lactic Acid) for Medical Tubing Applications
|
|
2019 |
|
|
|
|
[7]
|
Influence of Annealing and Biaxial Expansion on the Properties of Poly (l-Lactic Acid) Medical Tubing
|
|
2019 |
|
|
|
|
[8]
|
Long-and short-term stability of plasticized poly (lactic acid): effects of plasticizers type on thermal, mechanical and morphological properties
|
|
Polymer Bulletin,
2018 |
|
|
|
|
[9]
|
Miscibility of Crystalline/Amorphous/Crystalline Biopolymer Blends from PLLA/PDLLA/PHB with Additives
|
|
Polymer-Plastics Technology and Engineering,
2018 |
|
|
|
|
[10]
|
The New Generation from Biomembrane with Green Technologies for Wastewater Treatment
|
|
Polymers,
2018 |
|
|
|
|
[11]
|
Crystallization of itaconic anhydride grafted poly (lactic acid) during annealing
|
|
Journal of applied polymer science,
2017 |
|
|
|
|
[12]
|
Increase the elongation at break of poly (lactic acid) composites for use in food packaging films
|
|
Scientific Reports,
2017 |
|
|
|
|
[13]
|
Effect of PHB on the properties of biodegradable PLA blends
|
|
Chemical Papers,
2016 |
|
|
|
|
[14]
|
Modification of poly (lactic acid) using itaconic anhydride by reactive extrusion
|
|
European Polymer Journal,
2015 |
|
|
|
|
[15]
|
聚乳酸/纳米 SiO2 复合材料的非等温冷结晶行为
|
|
塑料科技,
2014 |
|
|
|
|
[16]
|
Development of novel biopolymer blends based on poly(l‐lactic acid), poly((R)‐3‐hydroxybutyrate), and plasticizer
|
|
Polymer Engineering & Science,
2014 |
|
|
|
|
[17]
|
Development of novel biopolymer blends based on poly (l‐lactic acid), poly ((R)‐3‐hydroxybutyrate), and plasticizer
|
|
Polymer Engineering & Science,
2014 |
|
|
|
|
[18]
|
The effect of additives interaction on the miscibility and crystal structure of two immiscible biodegradable polymers
|
|
Polímeros,
2014 |
|
|
|
|
[19]
|
Enhancing the crystallization and orientation of electrospinning poly (lactic acid)(PLLA) by combining with additives
|
|
Journal of Polymer Research,
2014 |
|
|
|
|
[20]
|
聚乳酸/纳米 SiO_2 复合材料的非等温冷结晶行为
|
|
塑料科技,
2014 |
|
|
|
|
[21]
|
Tough, biodegradable poly (L-lactic acid) polymer blends
|
|
A El-Hadi - 4spepro.org,
2013 |
|
|
|
|
[1]
|
Thermal analysis and polarized light microscopy as methods to study the increasing of the durability of PLA designed for 3D printing
International Journal of Polymer Analysis and Characterization,
2021
DOI:10.1080/1023666X.2021.1880111
|
|
|
|
|
[2]
|
Role of lubricant with a plasticizer to change the glass transition temperature as a result improving the mechanical properties of poly(lactic acid) PLLA
Materials Research Express,
2020
DOI:10.1088/2053-1591/ab715a
|
|
|
|
|
[3]
|
The Influence of Low Shear Microbore Extrusion on the Properties of High Molecular Weight Poly(l-Lactic Acid) for Medical Tubing Applications
Polymers,
2019
DOI:10.3390/polym11040710
|
|
|
|
|
[4]
|
Influence of Annealing and Biaxial Expansion on the Properties of Poly(l-Lactic Acid) Medical Tubing
Polymers,
2019
DOI:10.3390/polym11071172
|
|
|
|
|
[5]
|
Miscibility of Crystalline/Amorphous/Crystalline Biopolymer Blends from PLLA/PDLLA/PHB with Additives
Polymer-Plastics Technology and Engineering,
2018
DOI:10.1080/03602559.2018.1455863
|
|
|
|
|
[6]
|
Increase the elongation at break of poly (lactic acid) composites for use in food packaging films
Scientific Reports,
2017
DOI:10.1038/srep46767
|
|
|
|