has been cited by the following article(s):
|
[1]
|
Preparation and performance of Ti/Ti-DLC composite coatings for precision glass molding
|
|
Ceramics International,
2024 |
|
|
|
|
[2]
|
Facile synthesis of dense SiBCN coatings with excellent compactness, smoothness, and high-temperature inertness on defective graphite surfaces
|
|
Surfaces and Interfaces,
2024 |
|
|
|
|
[3]
|
Thin film coatings with ultra–high stability for precision glass molding
|
|
2023 |
|
|
|
|
[4]
|
Review on thin film coatings for precision glass molding
|
|
Surfaces and Interfaces,
2022 |
|
|
|
|
[5]
|
Die galvanische Abscheidung von Iridium aus Hexabromoiridatkomplexen
|
|
2021 |
|
|
|
|
[6]
|
Influence of glass contact induced changes in surface composition of Pt, PtIr and Ir protective coatings on glass adhesion
|
|
2021 |
|
|
|
|
[7]
|
Theoretical and experimental investigation of carbide-bonded graphene-assisted hot embossing of plano-convex glass microlens arrays
|
|
2020 |
|
|
|
|
[8]
|
Quantum mechanically guided design of noble metal coatings for precision glass molding technology
|
|
2020 |
|
|
|
|
[9]
|
高精度微结构玻璃光学元件阵列模压技术研究进展
|
|
2020 |
|
|
|
|
[10]
|
Kinetically Limited Phase Formation of Pt-Ir Based Compositionally Complex Thin Films
|
|
2020 |
|
|
|
|
[11]
|
Verschleiß der Umformwerkzeuge beim Präzisionsblankpressen von Quarzglas
|
|
2020 |
|
|
|
|
[12]
|
Front Matter: Volume 11171
|
|
2019 |
|
|
|
|
[13]
|
PVD‐Schutzschichten für Werkzeuge des Präzisionsblankpressens: Eigenschaften einlagiger und nanostrukturierter Hartstoffschichten
|
|
2019 |
|
|
|
|
[14]
|
PtIr protective coating system for precision glass molding tools: design, evaluation and mechanism of degradation
|
|
2019 |
|
|
|
|
[15]
|
Precision Glass Molding of Fused Silica Optics
|
|
euspen’s 18 th International Conference & Exhibition,
2018 |
|
|
|
|
[16]
|
Metastable phase formation of Pt-X (X= Ir, Au) thin films
|
|
Scientific Reports,
2018 |
|
|
|
|
[17]
|
Atomic diffusion induced degradation in bimetallic layer coated cemented tungsten carbide
|
|
Corrosion Science,
2017 |
|
|
|
|
[18]
|
Effect of Nb addition to Ti-bearing super martensitic stainless steel on control of austenite grain size and strengthening
|
|
2017 |
|
|
|
|
[19]
|
Analysis of wear of fused silica moulding using glassy carbon moulds
|
|
Production Engineering,
2016 |
|
|
|
|
[20]
|
Tribological wear analysis and numerical lifetime prediction of glassy carbon tools in fused silica molding
|
|
Wear,
2016 |
|
|
|
|
[21]
|
Precision glass molding: cost efficient production of glass-optics with spectral range from 180nm ultraviolet to 13μm thermal infrared
|
|
Proceedings Volume 10009, Third European Seminar on Precision Optics Manufacturing,
2016 |
|
|
|
|
[22]
|
Atomic diffusion induced degradation in bimetallic
|
|
2016 |
|
|
|
|
[23]
|
Low-Cost Sibcn Coatings with Excellent Hardness, Smoothness, and High-Temperature Inertness Coated on Defective Graphite Surfaces
|
|
Smoothness
|
|
|
|
|
[1]
|
Defect-mediated atomic reconstruction of nickel-phosphorus via multi-cycle Ti implantation
Surface and Coatings Technology,
2026
DOI:10.1016/j.surfcoat.2025.132986
|
|
|
|
|
[2]
|
Kinetically Limited Phase Formation of Pt-Ir Based Compositionally Complex Thin Films
Materials,
2020
DOI:10.3390/ma13102298
|
|
|
|
|
[3]
|
PVD‐Schutzschichten für Werkzeuge des Präzisionsblankpressens
Vakuum in Forschung und Praxis,
2019
DOI:10.1002/vipr.201900711
|
|
|
|
|
[4]
|
Metastable phase formation of Pt-X (X = Ir, Au) thin films
Scientific Reports,
2018
DOI:10.1038/s41598-018-28452-4
|
|
|
|
|
[5]
|
Precision glass molding: cost efficient production of glass-optics with spectral range from 180nm ultraviolet to 13μm thermal infrared
Third European Seminar on Precision Optics Manufacturing,
2016
DOI:10.1117/12.2235475
|
|
|
|
|
[6]
|
Analysis of wear of fused silica moulding using glassy carbon moulds
Production Engineering,
2016
DOI:10.1007/s11740-016-0681-8
|
|
|
|