Materials Sciences and Applications

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.net/journal/msa
E-mail: [email protected]
"Deposition of Titanium Layer on Steel Substrate Using PECVD Method: A Parametric Study"
written by Haman Hedaiatmofidi, Alireza Sabour Rouh Aghdam, Shahrokh Ahangarani, Mansour Bozorg, Mahboube Azadi, Maryam Valiei,
published by Materials Sciences and Applications, Vol.5 No.3, 2014
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Green Materials for Radiation Shielding: An Overview
Abhari… - Emerging …, 2023
[2] Microstructural evolution of TiC nano powders under fast neutron irradiation: A multi-technique analysis
Vacuum, 2023
[3] Review of Titanium Related Inclusions in Casting of Steel
Archives of Foundry Engineering, 2023
[4] Effect of nitrogen concentration on titanium nitride thin film formation
… of Mathematics and …, 2023
[5] Influence of coating application parameters on selected properties
Metalurgija, 2022
[6] Deposition of TiN, TiC, and DLC Coatings by PACVD
2018
[7] Tribological studies on bearings coated with titanium carbo-nitride (TiCN) using chemical vapour deposition (Cvd) method
2018
[8] Deposition of titanium coating on SiC fiber by chemical vapor deposition with Ti-I 2 system
Applied Surface Science, 2017
[9] The influence of the pyrolysis process on mechanical parameters and tightness of the black glasses layers on titanium substrates
Ceramics International, 2017
[10] The sTudy of selecTed properTIes of Ti eB pVd coaTIng deposITed onTo Inner TuBe surface aT low TemperaTure
Archives of Metallurgy and Materials, 2016
[11] Deposition characteristics of titanium coating deposited on SiC fiber by cold-wall chemical vapor deposition
Materials Chemistry and Physics, 2016
[12] Estudo da Degradação de Revestimentos Inorgânicos por Detergentes Comerciais
2016
[13] A review on titanium nitride and titanium carbide single and multilayer coatings deposited by plasma assisted chemical vapor deposition
2016
[14] Ispitivanje otpornosti na toplinski umor alatnog čelika za topli rad
2015
SCIRP Newsletter
Copyright © 2006-2026 Scientific Research Publishing Inc. All Rights Reserved.
Top