Hydrogen Solubility in Liquid and Solid Pure Aluminum—Critical Review of Measurement Methodologies and Reported Values

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.net/journal/msa
E-mail: [email protected]

Citations

Journals Menu

Guidelines & Policies

"Hydrogen Solubility in Liquid and Solid Pure Aluminum—Critical Review of Measurement Methodologies and Reported Values"
written by Prince N. Anyalebechi,
published by Materials Sciences and Applications, Vol.13 No.4, 2022

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Effect of solid solution treatment on the kinetics of hydrogen porosity evolution and mechanical properties in Al–Cu–Li alloys
	Vacuum, 2024

[2]	Structure Formation and Mechanical Properties of Wire Arc Additively Manufactured Al4043 (AlSi5) Components
	Metals, 2024

[3]	Non-destructive detection and analysis of weld defects in dissimilar pulsed GMAW and FSW joints of aluminium castings and plates through 3D X-ray computed …
	The International Journal of …, 2024

[4]	The Effect of Cycling Process Between− 196 and 120° C on Microstructure and Properties of Additively Manufactured 7050 Al Alloy
	Advanced Engineering …, 2024

[5]	Revealing mechanism of pore defect formation in laser directed energy deposition of aluminum alloy via in-situ synchrotron X-ray imaging
	arXiv preprint arXiv …, 2024

[6]	Characterization of Heat Transport and Diffusion Processes During Metal Melt Filtration
	Multifunctional Ceramic Filter …, 2024

[7]	Journal of the Technical University of Gabrovo
	Journal of the Technical University of Gabrovo, 2024

[8]	金属粉末レーザ積層造形法で作製した AlSi10Mg 合金の熱処理による寸法変化
	日本金属学会 …, 2024

[9]	Kinetic Mechanism of Hydrogen Absorption of AA6111 Alloys Melt
	Metals, 2023

[10]	Dimensional Changes of Selectively Laser-Melted AlSi10Mg Alloy Induced by Heat Treatment
	ishi, S Dong, M Hara… - MATERIALS …, 2023

[11]	Hydrogen Absorption of Aluminum-Magnesium Melts from Humid Atmospheres
	Light Metals 2023, 2023

[12]	Joining technologies for aluminium castings—A review
	Coatings, 2023

[13]	Quantifying the effects of hydrogen concentration and cooling rates on porosity formation in Al–Li alloys
	Journal of Materials …, 2023

[14]	Water-aluminum reaction by MD simulations and its interpretation defect formation
	Computational Materials Science, 2023

[15]	Joining Technologies for Aluminium Castings—A Review. Coatings 2023, 13, 958
	2023

[16]	Determination of effect of hydrogen on strength of aluminum by MD simulation
	Applied Physics A, 2022

[17]	Microstructure and Mechanical Properties of Cooling Slope Rheocast Al-7Si-0.3 Mg Alloy and Development of a Rheo Pressure Die Cast Knuckle Housing
	Metallurgical and Materials Transactions B, 2022

[18]	Evolution of Hydrogen Concentration in a Liquid Aluminum Alloy during the Aided Sedimentation of Double Oxide Films by (Al, Si) 3Ti Intermetallic Particles

[1]	Hydrogen porosity modelling and material characterization of wire arc additively manufactured hypoeutectic Al–Si alloy Progress in Additive Manufacturing, 2026 DOI:10.1007/s40964-025-01368-y

[2]	Investigation of the formation and reduction of hydrogen porosity during laser welding of additively manufactured AlSi10Mg parts The International Journal of Advanced Manufacturing Technology, 2026 DOI:10.1007/s00170-025-17198-9

[3]	In-situ observation of hydrogen microporosity nucleation and growth during superheating of Al–Li alloy Materials Research Letters, 2025 DOI:10.1080/21663831.2025.2479653

[4]	Light Metals 2025 The Minerals, Metals & Materials Series, 2025 DOI:10.1007/978-3-031-80676-6_142

[5]	Effect of Alloy Composition, Solidification Rate, Porosity Level, Grain Refining and Modification on the Performance of Aluminum-Based Alloys Journal of Materials Engineering and Performance, 2025 DOI:10.1007/s11665-025-11784-4

[6]	Dimensional Changes of Selectively Laser-Melted AlSi10Mg Alloy Induced by Heat Treatment Journal of the Japan Institute of Metals and Materials, 2024 DOI:10.2320/jinstmet.J2023023

[7]	Non-destructive detection and analysis of weld defects in dissimilar pulsed GMAW and FSW joints of aluminium castings and plates through 3D X-ray computed tomography The International Journal of Advanced Manufacturing Technology, 2024 DOI:10.1007/s00170-024-13576-x

[8]	Multifunctional Ceramic Filter Systems for Metal Melt Filtration Springer Series in Materials Science, 2024 DOI:10.1007/978-3-031-40930-1_14

[9]	In-situ study on the effect of Li concentration on hydrogen microporosity evolution in Al-Li alloys by synchrotron X-ray radiography Journal of Alloys and Compounds, 2024 DOI:10.1016/j.jallcom.2024.176810

[10]	Porosity control and properties improvement of Al-Cu alloys via solidification condition optimisation in wire and arc additive manufacturing Virtual and Physical Prototyping, 2024 DOI:10.1080/17452759.2024.2414408

[11]	Light Metals 2023 The Minerals, Metals & Materials Series, 2023 DOI:10.1007/978-3-031-22532-1_122

[12]	Dimensional Changes of Selectively Laser-Melted AlSi10Mg Alloy Induced by Heat Treatment MATERIALS TRANSACTIONS, 2023 DOI:10.2320/matertrans.MT-M2022165

	[email protected]
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

Materials Sciences and Applications

Journals Menu

Guidelines & Policies

Home

About SCIRP

Service

Policies