has been cited by the following article(s):
|
[1]
|
Numerical simulation of using DBD plasma air blower for a proton exchange membrane fuel cell
|
|
International Journal of Hydrogen Energy,
2024 |
|
|
|
|
[2]
|
Quantitative analysis of energy loss and performance prediction of regenerative compressor
|
|
Applied Thermal Engineering,
2024 |
|
|
|
|
[3]
|
Performance analysis of a microbubble pump with novel 'S-shape'impeller by experimental and numerical analysis at design and off-design operating …
|
|
Applied Sciences,
2021 |
|
|
|
|
[4]
|
Parametric study and numerical analysis of the regenerative compressor with symmetric aerodynamic blades, to improve performance
|
|
… Of Applied and Computational Sciences in …,
2021 |
|
|
|
|
[5]
|
Performance Analysis of a Microbubble Pump with Novel 'S-Shape'Impeller by Experimental and Numerical Analysis at Design and Off-Design Operating Conditions
|
|
2021 |
|
|
|
|
[6]
|
Shape optimization of regenerative flow compressor with aero-foil type blades using response surface methodology coupled with CFD
|
|
Structural and Multidisciplinary Optimization,
2021 |
|
|
|
|
[7]
|
مطالعۀ پارامتری و تحلیل عددی کمپرسور بازتولیدکننده با پرههای آیرودینامیکی متقارن، برای بهبود عملکرد
|
|
علوم کاربردی و محاسباتی در مکانیک,
2021 |
|
|
|
|
[8]
|
Optimal Design of a Novel 'S-shape'Impeller Blade for a Microbubble Pump
|
|
2019 |
|
|
|
|
[9]
|
Improving the efficiency of regenerative blower impellers
|
|
2019 |
|
|
|
|
[10]
|
INVESTIGATION OF STRUCTURAL INTEGRITY IN INTEGRATED BLADED ROTOR (IBR) OF A GAS TURBINE ROTOR
|
|
2019 |
|
|
|
|
[11]
|
Bubble Size and Bubble Concentration of a Microbubble Pump with Respect to Operating Conditions
|
|
Energies,
2018 |
|
|
|
|
[12]
|
Исследование влияния давления газа на входе в струйно-реактивную турбину на показатели ее
|
|
2018 |
|
|
|
|
[13]
|
Analysing mass flow rate and noise level of blowers through Ansys CFX solver.
|
|
2017 |
|
|
|
|
[14]
|
Optimization of a regenerative blower to enhance aerodynamic and aeroacoustic performance
|
|
Journal of Mechanical Science and Technology,
2016 |
|
|
|
|
[15]
|
Analysing mass flow rate and noise level of blowers through Ansys CFX solver
|
|
Annals of GIS,
2016 |
|
|
|
|
[16]
|
Aerodynamic and Aeroacoustic Analyses of a Regenerative Blower
|
|
ASME Turbo Expo 2015: Turbine Technical Conference and Exposition,
2015 |
|
|
|
|
[17]
|
Performance Enhancement of 20kW Regenerative Blower Using Design Parameters
|
|
International Journal of Fluid Machinery and Systems,
2014 |
|
|
|
|
[1]
|
Quantitative analysis of energy loss and performance prediction of regenerative compressor
Applied Thermal Engineering,
2024
DOI:10.1016/j.applthermaleng.2024.122930
|
|
|
|
|
[2]
|
Performance Analysis of a Microbubble Pump with Novel ‘S-Shape’ Impeller by Experimental and Numerical Analysis at Design and Off-Design Operating Conditions
Applied Sciences,
2021
DOI:10.3390/app11041678
|
|
|
|
|
[3]
|
Design Optimization of Fluid Machinery
2019
DOI:10.1002/9781119188377.ch4
|
|
|
|
|
[4]
|
Optimal Design of a Novel ‘S-shape’ Impeller Blade for a Microbubble Pump
Energies,
2019
DOI:10.3390/en12091793
|
|
|
|
|
[5]
|
Bubble Size and Bubble Concentration of a Microbubble Pump with Respect to Operating Conditions
Energies,
2018
DOI:10.3390/en11071864
|
|
|
|
|
[6]
|
Optimization of a regenerative blower to enhance aerodynamic and aeroacoustic performance
Journal of Mechanical Science and Technology,
2016
DOI:10.1007/s12206-016-0223-5
|
|
|
|