|
[1]
|
Recent Advances in Materials Processing and Characterization
Springer Proceedings in Materials,
2026
DOI:10.1007/978-981-95-3090-8_4
|
|
|
|
|
[2]
|
Comparative mechanical analysis of polymers made by SLA, FDM, and injection
Matéria (Rio de Janeiro),
2026
DOI:10.1590/1517-7076-rmat-2025-0817
|
|
|
|
|
[3]
|
Investigating the effects of processing parameters in reactive extrusion additive manufacturing
Additive Manufacturing,
2025
DOI:10.1016/j.addma.2025.104716
|
|
|
|
|
[4]
|
In-plane transverse mechanical properties in material extrusion components: critical evaluation of sample preparation methodologies
The International Journal of Advanced Manufacturing Technology,
2025
DOI:10.1007/s00170-025-15502-1
|
|
|
|
|
[5]
|
Recent progress in additive manufacturing of porous titanium: From design to applications
Journal of Alloys and Compounds,
2025
DOI:10.1016/j.jallcom.2025.180451
|
|
|
|
|
[6]
|
Advances in 3D and 4D Printing of Medical Robots and Devices
2025
DOI:10.1016/B978-0-443-24861-0.00003-4
|
|
|
|
|
[7]
|
In-situ monitoring and correction of geometric deviations in material extrusion additive manufacturing
Rapid Prototyping Journal,
2025
DOI:10.1108/RPJ-11-2024-0478
|
|
|
|
|
[8]
|
Modeling, Analysis, and Control of 3D Printing Processes
2025
DOI:10.4018/979-8-3373-0533-2.ch012
|
|
|
|
|
[9]
|
Improving sound absorption through the filament stringing effect in 3D printed acoustic materials
Applied Acoustics,
2025
DOI:10.1016/j.apacoust.2025.110892
|
|
|
|
|
[10]
|
Optimum part filling via layer-wise variation of raster angle in fused filament fabrication
International Journal on Interactive Design and Manufacturing (IJIDeM),
2025
DOI:10.1007/s12008-024-02189-z
|
|
|
|
|
[11]
|
EKLEMELİ İMALAT YÖNTEMİYLE ÜRETİLEN ABS CIVATA NUMUNESİNİN MEKANİK ÖZELLİKLERİNİN İNCELENMESİ
Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi,
2024
DOI:10.17780/ksujes.1378628
|
|
|
|
|
[12]
|
Unraveling the main issues of direct sample printing and sample cutting from a sheet of tensile test samples for characterization of Material Extrusion components
The International Journal of Advanced Manufacturing Technology,
2024
DOI:10.1007/s00170-024-13572-1
|
|
|
|
|
[13]
|
Encyclopedia of Sustainable Technologies
2024
DOI:10.1016/B978-0-323-90386-8.00143-1
|
|
|
|
|
[14]
|
A Review of Additive Manufacturing in Tissue Engineering and Regenerative Medicine
Biomedical Materials & Devices,
2024
DOI:10.1007/s44174-024-00183-3
|
|
|
|
|
[15]
|
Advancements in Quadcopter Development through Additive Manufacturing: A Comprehensive Review
International Journal of Scientific Research in Science, Engineering and Technology,
2024
DOI:10.32628/IJSRSET24114109
|
|
|
|
|
[16]
|
3D-Printed Silk Proteins for Bone Tissue Regeneration and Associated Immunomodulation
Biomacromolecules,
2024
DOI:10.1021/acs.biomac.4c00540
|
|
|
|
|
[17]
|
An overview of traditional and advanced methods to detect part defects in additive manufacturing processes
Journal of Intelligent Manufacturing,
2024
DOI:10.1007/s10845-024-02483-3
|
|
|
|
|
[18]
|
Knowledge-based product and process design synthesis of additively manufactured non-assembly mechanisms
Journal of Engineering Design,
2024
DOI:10.1080/09544828.2024.2339162
|
|
|
|
|
[19]
|
Impact of printing parameters on in-plane tensile and fracture toughness of fused filament fabricated PEEK
Progress in Additive Manufacturing,
2024
DOI:10.1007/s40964-023-00554-0
|
|
|
|
|
[20]
|
Polymer-based 3D printing of function-integrated optomechanics – design guidelines and system evaluation
Rapid Prototyping Journal,
2024
DOI:10.1108/RPJ-02-2023-0073
|
|
|
|
|
[21]
|
Artificial reefs through additive manufacturing: a review of their design, purposes and fabrication process for marine restoration and management
Rapid Prototyping Journal,
2024
DOI:10.1108/RPJ-07-2023-0222
|
|
|
|
|
[22]
|
Investigations of influence of infill pattern on tensile strength of 3D-printed poly lactic acid and Polyethylene Terephthalate Glycol material using Design of Experiments
Materials Today: Proceedings,
2023
DOI:10.1016/j.matpr.2023.03.406
|
|
|
|
|
[23]
|
Prediction of compressive strength in additively fabricated part using long short term memory based neural network
Materials Today Communications,
2023
DOI:10.1016/j.mtcomm.2023.107139
|
|
|
|
|
[24]
|
Closed-cell metamaterial composites 3D printed with hybrid FFF process for tunable mechanical and functional properties
Thin-Walled Structures,
2023
DOI:10.1016/j.tws.2023.111168
|
|
|
|
|
[25]
|
Human-Automation Interaction
Automation, Collaboration, & E-Services,
2023
DOI:10.1007/978-3-031-10780-1_27
|
|
|
|
|
[26]
|
Experimental Research and Numerical Simulation in Applied Sciences
Lecture Notes in Networks and Systems,
2023
DOI:10.1007/978-3-031-19499-3_3
|
|
|
|
|
[27]
|
Solution-Processable PEDOT Particles for Coatings of Untreated 3D-Printed Thermoplastics
ACS Applied Materials & Interfaces,
2023
DOI:10.1021/acsami.2c18328
|
|
|
|
|
[28]
|
Chitosan Nanocomposites
Biological and Medical Physics, Biomedical Engineering,
2023
DOI:10.1007/978-981-19-9646-7_16
|
|
|
|
|
[29]
|
Additive Manufacturing Design and Applications
2023
DOI:10.31399/asm.hb.v24A.a0006948
|
|
|
|
|
[30]
|
Additive Manufacturing: Design, Processes and Applications
SpringerBriefs in Applied Sciences and Technology,
2023
DOI:10.1007/978-3-031-33793-2_2
|
|
|
|
|
[31]
|
Effect of raster and layer characteristics on tensile behavior and failure of FFF printed PLA samples by representative volume element model
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,
2023
DOI:10.1177/09544054231202210
|
|
|
|
|
[32]
|
A post-topology optimization process for overhang elimination in additive manufacturing: design workflow and experimental investigation
The International Journal of Advanced Manufacturing Technology,
2023
DOI:10.1007/s00170-023-12282-4
|
|
|
|
|
[33]
|
Digital Design and Manufacturing of Medical Devices and Systems
2023
DOI:10.1007/978-981-99-7100-8_12
|
|
|
|
|
[34]
|
Composite filaments OF PHBV reinforced with ZrO2·nH2O particles for 3D printing
Polymer Bulletin,
2022
DOI:10.1007/s00289-021-03610-3
|
|
|
|
|
[35]
|
Supportless Lattice Structure for Additive Manufacturing of Functional Products and the Evaluation of Its Mechanical Property at Variable Strain Rates
Materials,
2022
DOI:10.3390/ma15227954
|
|
|
|
|
[36]
|
ATMOSFERİK BASINÇLI PLAZMA UYGULAMASININ 3B BASKILARA ETKİSİNİN İNCELENMESİ
Uludağ University Journal of The Faculty of Engineering,
2022
DOI:10.17482/uumfd.1087623
|
|
|
|
|
[37]
|
Comparative finite element analysis of ISO standard bolt using ABS and PLA material
Materials Today: Proceedings,
2022
DOI:10.1016/j.matpr.2022.09.063
|
|
|
|
|
[38]
|
Investigation of the manufacturability of a copper coil for use in space components by means of the fused filament fabrication process
CEAS Space Journal,
2022
DOI:10.1007/s12567-022-00475-8
|
|
|
|
|
[39]
|
On effect of chemical-assisted mechanical blending of barium titanate and graphene in PVDF for 3D printing applications
Journal of Thermoplastic Composite Materials,
2022
DOI:10.1177/0892705720945377
|
|
|
|
|
[40]
|
Material design factors in the additive manufacturing of Carbon Fiber Reinforced Plastic Composites: A state-of-the-art review
Advances in Industrial and Manufacturing Engineering,
2022
DOI:10.1016/j.aime.2022.100100
|
|
|
|
|
[41]
|
Sustainability for 3D Printing
Springer Tracts in Additive Manufacturing,
2022
DOI:10.1007/978-3-030-75235-4_6
|
|
|
|
|
[42]
|
Development of Texture Mapping Approaches for Additively Manufacturable Surfaces
Chinese Journal of Mechanical Engineering,
2022
DOI:10.1186/s10033-022-00766-5
|
|
|
|
|
[43]
|
Investigation of different parameters of cube printed using PLA by FDM 3D printer
Materials Today: Proceedings,
2022
DOI:10.1016/j.matpr.2022.03.700
|
|
|
|
|
[44]
|
A comprehensive analysis on the processing-structure-property relationships of FDM-based 3-D printed polyetheretherketone (PEEK) structures
Materialia,
2022
DOI:10.1016/j.mtla.2022.101427
|
|
|
|
|
[45]
|
Fused filament fabrication: A state-of-the-art review of the technology, materials, properties and defects
International Journal on Interactive Design and Manufacturing (IJIDeM),
2022
DOI:10.1007/s12008-022-01026-5
|
|
|
|
|
[46]
|
A Comprehensive Analysis on the Processing-Structure-Property Relationships of Fdm-Based 3-D Printed Polyetheretherketone (Peek) Structures
SSRN Electronic Journal ,
2022
DOI:10.2139/ssrn.4047836
|
|
|
|
|
[47]
|
A review on voids of 3D printed parts by fused filament fabrication
Journal of Materials Research and Technology,
2021
DOI:10.1016/j.jmrt.2021.10.108
|
|
|
|
|
[48]
|
Experimental investigation and optimization of printing parameters of
3D
printed polyphenylene sulfide through response surface methodology
Journal of Applied Polymer Science,
2021
DOI:10.1002/app.49625
|
|
|
|
|
[49]
|
Fused deposition modelling: Current status, methodology, applications and future prospects
Additive Manufacturing,
2021
DOI:10.1016/j.addma.2021.102378
|
|
|
|
|
[50]
|
On flexural and pull out properties of smart polymer based 3D printed functional prototypes
Sādhanā,
2021
DOI:10.1007/s12046-021-01709-x
|
|
|
|
|
[51]
|
Effect of Process Parameters and Postprocessing on Mechanical Properties of Additive Manufacturing Polylactic Acid Obtained by Fused Deposition Modeling
3D Printing and Additive Manufacturing,
2021
DOI:10.1089/3dp.2021.0052
|
|
|
|
|
[52]
|
Analytical models to estimate the structural behaviour of fused deposition modelling components
Rapid Prototyping Journal,
2021
DOI:10.1108/RPJ-07-2020-0145
|
|
|
|
|
[53]
|
Photocurable magnetic materials with tailored functional properties
Composites Part C: Open Access,
2021
DOI:10.1016/j.jcomc.2021.100143
|
|
|
|
|
[54]
|
Fused Deposition Modeling Based 3D Printing
Materials Forming, Machining and Tribology,
2021
DOI:10.1007/978-3-030-68024-4_2
|
|
|
|
|
[55]
|
The Feature-Driven Method for Structural Optimization
2021
DOI:10.1016/B978-0-12-821330-8.00008-0
|
|
|
|
|
[56]
|
Geometrical Degrees of Freedom for Cellular Structures Generation: A New Classification Paradigm
Applied Sciences,
2021
DOI:10.3390/app11093845
|
|
|
|
|
[57]
|
Chitosan-based 3D-printed scaffolds for bone tissue engineering
International Journal of Biological Macromolecules,
2021
DOI:10.1016/j.ijbiomac.2021.05.215
|
|
|
|
|
[58]
|
Usabilidade e afetividade no design distribuído: um estudo sobre a qualidade visual e háptica percebida dos produtos utilitários fabricados por impressão 3D FDM por laboratórios independentes
Blucher Design Proceedings,
2021
DOI:10.5151/isspppgdesign-18
|
|
|
|
|
[59]
|
3D printing of metals using biodegradable cellulose hydrogel inks
Additive Manufacturing,
2021
DOI:10.1016/j.addma.2021.102380
|
|
|
|
|
[60]
|
Modelling the Process of Fused Deposition Modelling and the Effect of Temperature on the Mechanical, Roughness, and Porosity Properties of Resulting Composite Products
Mechanics of Composite Materials,
2021
DOI:10.1007/s11029-021-09925-6
|
|
|
|
|
[61]
|
Development of a CT imaging phantom of anthromorphic lung using fused deposition modeling 3D printing
Medicine,
2020
DOI:10.1097/MD.0000000000018617
|
|
|
|
|
[62]
|
Novel origami-inspired metamaterials: Design, mechanical testing and finite element modelling
Materials & Design,
2020
DOI:10.1016/j.matdes.2019.108242
|
|
|
|
|
[63]
|
Mechanical and Thermo-mechanical Properties of Carbon fiber Reinforced Thermoplastic Composite Fabricated Using Fused Deposition Modeling Method
Materials Today: Proceedings,
2020
DOI:10.1016/j.matpr.2020.03.012
|
|
|
|
|
[64]
|
Origami spring–inspired metamaterials and robots: An attempt at fully programmable robotics
Science Progress,
2020
DOI:10.1177/0036850420946162
|
|
|
|
|
[65]
|
Mining Design Heuristics for Additive Manufacturing Via Eye-Tracking Methods and Hidden Markov Modeling
Journal of Mechanical Design,
2020
DOI:10.1115/1.4048410
|
|
|
|
|
[66]
|
Topology optimization method with elimination of enclosed voids
Structural and Multidisciplinary Optimization,
2019
DOI:10.1007/s00158-019-02204-y
|
|
|
|
|
[67]
|
A design framework for additive manufacturing
The International Journal of Advanced Manufacturing Technology,
2019
DOI:10.1007/s00170-019-03627-z
|
|
|
|
|
[68]
|
Metal bellow hydroforming using additive manufactured die: a case study
Rapid Prototyping Journal,
2019
DOI:10.1108/RPJ-07-2018-0182
|
|
|
|
|
[69]
|
An Ontology for Supporting Digital Manufacturability Analysis
Procedia CIRP,
2019
DOI:10.1016/j.procir.2019.03.211
|
|
|
|
|
[70]
|
Process and resource selection methodology in design for additive manufacturing
The International Journal of Advanced Manufacturing Technology,
2019
DOI:10.1007/s00170-019-03991-w
|
|
|
|
|
[71]
|
DEVELOPMENT OF A COMBINED ANALYTICAL AND EXPERIMENTAL APPROACH FOR THE DETERMINATION OF THE COHESIVE STRENGTH BETWEEN MATERIAL EXTRUSION LAYERS USING THE TRUE AREA OF CONTACT
Additive Manufacturing,
2019
DOI:10.1016/j.addma.2019.100832
|
|
|
|
|
[72]
|
Design and analysis of ISO standard bolt and nut in FDM 3D printer using PLA and ABS materials
Materials Today: Proceedings,
2019
DOI:10.1016/j.matpr.2019.07.737
|
|
|
|
|
[73]
|
Method for load-capable path planning in multi-axis fused deposition modeling
Procedia CIRP,
2019
DOI:10.1016/j.procir.2019.04.188
|
|
|
|
|
[74]
|
Microstructure and mechanical properties of direct metal laser–sintered 15-5PH steel with different solution annealing heat treatments
The International Journal of Advanced Manufacturing Technology,
2019
DOI:10.1007/s00170-019-04404-8
|
|
|
|
|
[75]
|
Integrated CAD customization system for fused deposition models in additive manufacture with 3D printing machine
IOP Conference Series: Materials Science and Engineering,
2019
DOI:10.1088/1757-899X/694/1/012008
|
|
|
|
|
[76]
|
Toward integrated design of additive manufacturing through a process development model and multi-objective optimization
The International Journal of Advanced Manufacturing Technology,
2018
DOI:10.1007/s00170-018-1880-6
|
|
|
|
|
[77]
|
Topology optimization of self-supporting structures with polygon features for additive manufacturing
Computer Methods in Applied Mechanics and Engineering,
2018
DOI:10.1016/j.cma.2018.01.037
|
|
|
|
|
[78]
|
Effect of manufacturing parameters on the microstructure and mechanical properties of metal laser sintering parts of precipitate hardenable metals
The International Journal of Advanced Manufacturing Technology,
2018
DOI:10.1007/s00170-018-2586-5
|
|
|
|
|
[79]
|
Selected problems of design and manufacturing of tailored swimming prosthesis
2018
DOI:10.1063/1.5056268
|
|
|
|
|
[80]
|
Investigating the effect of fused deposition modeling processing parameters using Taguchi design of experiment method
Journal of Manufacturing Processes,
2018
DOI:10.1016/j.jmapro.2018.09.025
|
|
|
|
|
[81]
|
Interactive design for additive manufacturing: a creative case of synchronous belt drive
International Journal on Interactive Design and Manufacturing (IJIDeM),
2017
DOI:10.1007/s12008-017-0453-5
|
|
|
|