Dr. Ng Teng Yong

Nanyang Technological University, Singapore

Email: [email protected]

Qualifications

1999 Ph.D., National University of Singapore, Mechanical Engineering

1996 M.Sc., National University of Singapore, Mechanical Engineering

1992 B.Sc., National University of Singapore, Mechanical Engineering

Publications(Selected)

1. Wang, K., Feng, C., & Ng, T. Y., et al. (2026). A novel three-dimensional weak-form quadrature rigid-frame element and its application in transmission tower analysis. Thin-Walled Structures, 229, Article 115147.
2. Ng, P. S., Ang, E. Y. M., & Wang, P. C., et al. (2026). Physics-informed neural network modelling for deep-water linear wave propagation. Engineering with Computers, 42(1), Article 27.
3. Chen, Y., Jin, Y., & Lin, R., et al. (2026). Harmonic balance-automatic differentiation method: A practical nonlinear dynamics solver. International Journal of Mechanical Sciences, Article 111192.
4. Wang, J., Ye, Z., & Wang, B., et al. (2025). 3D printing of machine learning-optimized continuous fiber-reinforced smart molds with a filament-withdrawal demolding strategy for extreme forming. Composites Part B: Engineering, Article 113187.
5. Ng, P. S., Ang, E. Y. M., & Wang, P. C., et al. (2025). Adaptive gradient-based weighting in physics-informed neural networks for two-phase deep-water wave propagation. In 2025 IEEE International Conference on Future Machine Learning and Data Science.
6. Choi, S., Kim, S. W., & Hwang, C., et al. (2025). Plasma assisted hydrothermal synthesis of 2D & 3D water intercalated V2O5 nanosheet clusters for high performing aqueous zinc ion battery. Small Structures, 6(9), Article 2500269.
7. Chen, Y., Jin, Y., & Lin, R., et al. (2025). Harmonic balance-automatic differentiation method: An out-of-the-box and efficient solver for general nonlinear dynamics simulation (arXiv Preprint arXiv:2508.07309). arXiv.
8. Beshay, P. F. R., Goh, M. H. S., & Ang, E. Y. M., et al. (2025). A review of the applicability and limitations of current single droplet dynamics modelling implemented in Ansys-fluent. International Communications in Heat and Mass Transfer, 166, Article 109134.
9. Beshay, P. F. R., Goh, M., & Ang, Y. M., et al. (2025). A review of the applicability and limitations of current single droplet dynamics modelling implemented in Ansys-fluent. Singapore Institute of Technology.
10. Ang, E. Y. M., Wang, P. C., & Toh, W., et al. (2025). Effects of velocity on evaporation rate of nanoscale water droplets. International Communications in Heat and Mass Transfer, 164, Article 108851.
11. Lin, J., Yu, Z., & Chen, T., et al. (2025). Sub-4 nanometer porous membrane enables highly efficient electrodialytic fractionation of dyes and inorganic salts. Nature Communications, 16(1), Article 3671.
12. Ang, E. Y. M., Toh, W., & Ng, T. Y., et al. (2025). How marine sponges filter the great oceans via flagella motion: A nanomechanics perspective. Nano Micro Mechanics Review, 1(1), 21–27.
13. Lee, M., Ang, Y. M., & Toh, W., et al. (2025). Hybrid SnO2/g-C3N4 layers with plasma-induced modifications for enhanced charge transport in perovskite solar cells. Singapore Institute of Technology.
14. Wang, K., Feng, C., & Ng, T. Y., et al. (2025). Static and dynamic analysis of high-order defective sandwich beams by a novel weak-form quadrature element method. Engineering Structures, 325, Article 119455.
15. Chen, Y., Hou, L., & Lin, R., et al. (2024). A harmonic balance method combined with dimension reduction and FFT for nonlinear dynamic simulation. Mechanical Systems and Signal Processing, 221, Article 111758.
16. Chen, Y., Hou, L., & Lin, R., et al. (2024). A general and efficient harmonic balance method for nonlinear dynamic simulation. International Journal of Mechanical Sciences, 276, Article 109388.
17. Goh, G. L., Huang, X., & Toh, W., et al. (2024). Joint angle prediction for a cable-driven gripper with variable joint stiffness through numerical modeling and machine learning. International Journal of AI for Materials and Design, 1(1), 62–74.
18. Goh, G. L., Goh, G. D., & Nguyen, V. P., et al. (2023). A 3D printing‐enabled artificially innervated smart soft gripper with variable joint stiffness. Advanced Materials Technologies, 8(24), Article 2301426.
19. Lin, J., Ye, W., & Xie, S., et al. (2023). Shielding effect enables fast ion transfer through nanoporous membrane for highly energy-efficient electrodialysis. Nature Water, 1(8), 725–735.

Profile Details

https://dr.ntu.edu.sg/entities/person/Ng-Teng-Yong
https://scholar.google.com/citations?user=PEf1P7gAAAAJ&hl=en
https://www.researchgate.net/profile/Teng-Ng-4

WOS ResearcherID: A-3848-2011