Dr. Yu-Fei Wu

Department of Civil and Architectural Engineering

City University of Hong Kong, China

Associate Professor

Email: [email protected]

Qualifications

2002  Ph.D., University of Adelaide, Australia

1995  M.Eng., National University of Singapore, Singapore

1986  M.Sc., Zhejiang University, China

1983  B.Sc., Zhejiang University, China

Publications (Selected)

1. Ramamoorthy, D., Xu, F., & Wu, Y., et al. (2026). Design and mechanical performance of perforated and core-filled SIFCON-based compression-yielding (CY) blocks: An experimental study. Case Studies in Construction Materials, 24, Article e06259.
2. Kazmi, S. M. S., Munir, M. J., & Wu, Y. F., et al. (2026). Multiscale evaluation of high-strength, low-carbon concrete with full replacement of virgin aggregates by aeolian sand and recycled aggregates via compression casting. Journal of Building Engineering, 116, Article 116242.
3. Zhang, Z., Song, J., & Chen, H., et al. (2026). Optimisation of hexagon-shaped floating units using the response surface method. Ships and Offshore Structures, 21(5), 618–631.
4. Wu, H., Li, X., & Luo, H., et al. (2026). Safety risk assessment for modular floating structure construction using WBS-RBS and cloud modeling. International Journal of Construction Management, 1–18.
5. Kazmi, S. M. S., Munir, M. J., & Wu, Y. F. (2026). Sustainable valorization of recycled polypropylene waste in concrete composites via compression casting: Integrating lifecycle, cost, and engineering assessments for plastic waste management. Environmental Research, Article 124270.
6. Sun, Q., & Wu, Y. F. (2026). Influence of recycled coarse aggregate quality on carbonation behavior of compression-cast fully recycled aggregate concrete. Construction and Building Materials, 514, Article 145542.
7. Huang, Z., Ji, X., & Zhou, Y., et al. (2026). Impact behavior of compression-cast LC3-based fiber-reinforced concrete under low-velocity impact loading. Journal of Building Engineering, 120, Article 115492.
8. Wu, Y., Kazmi, S. M. S., & Munir, M. J., et al. (2026). Method for preparing high-performance compressed desert sand concrete (U.S. Patent Application No. 18/882,974). U.S. Patent and Trademark Office.
9. Huang, X., Hu, B., & Du, T., et al. (2026). Carbon fiber-reinforced polymer active-passive-confined compression-cast reinforced concrete column incorporating cathodic protection (U.S. Patent No. 12,534,811). U.S. Patent and Trademark Office.
10. Li, D., Kazmi, S. M. S., & Li, H., et al. (2026). Mechanical behavior, stress–strain modeling, and structural validation of compression-cast fiber reinforced concrete under static and dynamic loading. Innovative Infrastructure Solutions, 11(1), Article 22.
11. Wu, Y., Qiu, L., & Chen, H., et al. (2025). Optimization design of a novel submerged floating mooring system for modular floating structures. IEEE Journal of Oceanic Engineering, 51(1), 87–107.
12. Zheng, W., Wu, Y., & Chen, W., et al. (2025). Simulation and sensitivity analysis of energy consumption in floating structures under typical and typhoon meteorological conditions. Energies, 18(24), Article 6388.
13. Cao, Y., Guo, X., & Wu, Y. F., et al. (2025). Effect of strain rate on the stress–strain behavior of FRP–confined concrete cylinders: Review and model. Structures, 82, Article 110592.
14. Wu, Y. F., Li, R. Y., & Li, P. D. (2025). Stress–strain behavior of FRP-confined concrete under eccentric loading. Journal of Composites for Construction, 29(6), Article 04025048.
15. Munir, M. J., Kazmi, S. M. S., & Wu, Y. F., et al. (2025). High-pressure compacted low-carbon concrete incorporating high-volume plastic waste: Mechanical, microstructural, durability, and sustainability assessment. Construction and Building Materials, 500, Article 144125.
16. Kazmi, S. M. S., Munir, M. J., & Wu, Y. F. (2025). Durability enhancement of compression-cast desert sand concrete in sulfate-rich environments. Journal of Building Engineering, Article 114694.
17. Guo, B., Lin, X., & Wu, Y., et al. (2025). Advanced analytical model and reliability analysis for long-term deflection of FRP reinforced concrete beams with compression yielding mechanism. Structures, 80, Article 110130.
18. Munir, M. J., Kazmi, S. M. S., & Wu, Y. F. (2025). High-strength compression-cast desert sand concrete: Stress-strain behavior, durability, microstructure, and cement savings. Journal of Building Engineering, 111, Article 113284.
19. Montazeran, A. H., & Wu, Y. F. (2025). Modular floating structures: The optimal prismatic section. Ocean Engineering, 337, Article 121882.
20. Jiang, L., Lin, X., & Wu, Y. (2025). Numerical study of FRP-reinforced compression yielding beams with perforated and confined compression cast concrete. Structures, 80, Article 109943.

Profile Details

https://scholar.google.com/citations?user=8I0lD_UAAAAJ&hl=en
https://www.researchgate.net/profile/Yifei-Wu-9

WOS ResearcherID: QIM-3759-2026