Prof. Wen-Feng Ding

College of Mechanical and Electrical Engineering

Nanjing University of Aeronautics and Astronautics, China

Professor

Email: [email protected]

Qualifications

2006 Ph.D., NanjingUniversityof Aeronautics and Astronautics, Mechanical Engineering

2001 B.Sc., Xi’anJiaotongUniversity, Mechanical Engineering

Publications(Selected)

1. Lei, X. F., Zhao, B., Cao, Y., et al. (2026). Prediction and research on grinding wheel wear based on the profile grinding force model of titanium alloy arc-shaped slots. Tribology International, 223, Article 112261.
2. Chen, T., Zhao, B., Contini, R. D. M. S., & Ding, W. F. (2026). Multi-objective design and evaluation of grinding wheels for ultrasonic vibration-assisted grinding of fiber-reinforced titanium matrix composites. Journal of Manufacturing Processes, 172, 939–961.
3. Chen, J., Wang, Z. X., Cao, Y., et al. (2026). Ultrasonic vibration-assisted milling technology for difficult-to-machine alloy materials in aerospace: Current status and trends. The International Journal of Advanced Manufacturing Technology.
4. Yuan, Y. Y., Yang, C. Y., Wang, P., et al. (2026). Integration of abrasive machining theory and motion compensation strategies for honing of 9310 steel. Advances in Manufacturing.
5. Zhao, B., Feng, S. D., Chen, T., et al. (2026). Quantitative evaluation and active control of machining damage in SiC continuous fibers TC17 composites during high-speed grinding. Tribology International, 223, Article 112254.
6. Peng, J. H., Wang, S. Y., Ding, W. F., et al. (2026). Machinability and surface formation mechanisms of SiCp/Al composites at different cutting speeds. Precision Engineering, 101, 310–322.
7. Miao, Q., Ding, W. F., Chen, T., et al. (2026). Machining performance and recrystallization characteristics of different Ni-base single-crystal superalloys in ultrasonic assisted high-speed grinding. International Journal of Precision Engineering and Manufacturing.
8. Zhao, B., Feng, S. D., Wang, Y. M., et al. (2026). Decoupling-based predictive force model for high-speed grinding of anisotropic continuous fibre-reinforced titanium matrix composites. Composites Part B: Engineering, 322, Article 113724.
9. Lei, X. F., Liu, X., Zhao, J. S., et al. (2026). A comparative study on the grinding performance of different ordinary corundum grinding wheels for profile grinding TC11 titanium alloy arc-shaped slots. The International Journal of Advanced Manufacturing Technology.
10. Beldi, O., Zarrouk, T., Abbadi, A., et al. (2026). Modification of the tribomechanical cutting regime in longitudinal-torsional ultrasonic milling: From adhesion to controlled fragmentation. Micromachines, 7(4), Article 177.
11. Lei, X. F., Liu, X., Liu, Z., et al. (2026). A review: From preparation to application of brazing wheel. Diamond and Related Materials, 164, Article 113571.
12. Wan, N., Wang, Z. H., Zhao, B., et al. (2026). Intelligent evolution strategies for high-performance cutting tools: Status, challenges, and trends. International Journal of Extreme Manufacturing, 8(2), Article 022007.
13. Wang, Z. H., Wan, N., Xi, R., et al. (2026). State-of-the-art review on grinding wheel wear measurement: From traditional techniques to intelligent sensing and future outlook. The International Journal of Advanced Manufacturing Technology, 143(11–12), 6025–6048.
14. Xiang, H., Wu, B. F., Jia, S. M., et al. (2026). Internal-cooling grinding wheels for aerospace difficult-to-cut materials: Design, fabrication, and performance. The International Journal of Advanced Manufacturing Technology, 143(9–10), 4713–4733.
15. Wang, S., Xie, Y. C., Pan, B., et al. (2026). Cooling and lubrication performance analysis in ultrasonic vibration-assisted grinding by heat pipe grinding wheel. Lubricants, 14(1), Article 30.
16. Wen, D., Wang, Z. X., Shi, Y. X., et al. (2026). Surface integrity evolution of WC-10Co-4Cr coating under tangential ultrasonic vibration-assisted grinding. The International Journal of Advanced Manufacturing Technology, 142(7–8), 3421–3432.
17. Liu, G. F., Xu, P. F., Sun, Y. T., et al. (2026). Study on single diamond scratching of woven SiCf/SiC composites: Surface morphology, force, and stress distribution. The International Journal of Advanced Manufacturing Technology, 142(5–6), 2287–2305.
18. Chen, T., Zhao, B., Ding, W. F., et al. (2026). Brittle-plastic synergistic removal mechanism and grain wear in ultrasonic grinding of anisotropic fiber-reinforced MMCs. Friction, 14(1), Article 9441087.
19. Li, Y., Zhao, Z. C., Qian, N., et al. (2026). Optimization of a self-tuning force control system for the milling process using a dynamic enhanced genetic algorithm. Chinese Journal of Mechanical Engineering, 39, Article 100100.
20. Liu, Z., Jiang, Z. H., Wang, R., et al. (2026). Induction coil optimization for ultrasonic-assisted high-frequency brazing of forming grinding tools. The International Journal of Advanced Manufacturing Technology, 142(3–4), 1865–1884.

Profile Details

https://scholar.google.com/citations?user=VL3QohQAAAAJ&hl=en
https://www.researchgate.net/profile/Wenfeng-Ding

WOS ResearcherID: KKC-4363-2024