Department of Electronic Engineering

University of Valencia, Spain

Associate Professor

Email: [email protected]

Qualifications

2000 Ph.D., Applied Physics, University of Valencia, Spain

1995 M.S., Applied Physics (Electromagnetism), University of Valencia, Spain

1994 B.S., Applied Physics (Electronics), University of Valencia, Spain

Publications (selected)

1. Darwish, H., Reig, C., Leger, G., et al. (2025). A 180-nm CMOS integrated capacitance-to-time converter for capacitive sensing applications. IEEE Sensors Journal, 25(19), 36395–36406.
2. Darwish, H., Reig, C., & Leger, G. (2023). Implementation of background calibration for redundant FLASH ADC. Electronics, 12(22), Article 4559.
3. Reig, C., Cubells-Beltrán, M. D., Pardo, F., et al. (2023). Dynamic electrical compact model of GMR sensors for neuromorphically inspired applications. AIP Advances, 13(2), Article 025225.
4. Darweesh, H. Y., Reig, C., & Leger, G. (2022). Self-healing of redundant FLASH ADCs. IEEE Design & Test, 39(3), 125–133.
5. Pardo, F., Reig, C., Boluda, J. A., et al. (2019). A 4K-input high-speed Winner-Take-All (WTA) circuit with single-winner selection for change-driven vision sensors. Sensors, 19(2), Article 437.
6. De Marcellis, A., Reig, C., & Cubells-Beltrán, M. D. (2019). A capacitance-to-time converter-based electronic interface for differential capacitive sensors. Electronics, 8(1), Article 80.
7. De Marcellis, A., Reig, C., Cubells-Beltrán, M. D., et al. (2017). Monolithic integration of GMR sensors for standard CMOS-IC current sensing. Solid-State Electronics, 135, 100–104.
8. De Marcellis, A., Reig, C., & Cubells-Beltrán, M. D. (2017). Current-based measurement technique for high sensitivity detection of resistive bridges with external balancing through control voltages. IEEE Sensors Journal, 17(2), 404–411.
9. Cubells-Beltrán, M. D., Reig, C., Madrenas, J., et al. (2016). Integration of GMR sensors with different technologies. Sensors, 16(6), Article 939.
10. Reig, C., & Avila-Navarro, E. (2014). Printed antennas for sensor applications: A review. IEEE Sensors Journal, 14(8), 2406–2418.
11. De Marcellis, A., Cubells-Beltrán, M. D., Reig, C., et al. (2014). Quasi-digital front-ends for current measurement in integrated circuits with giant magnetoresistance technology. IET Circuits, Devices & Systems, 8(4), 291–300.
12. Cubells-Beltrán, M. D., Reig, C., De Marcellis, A., et al. (2014). Monolithic integration of Giant Magnetoresistance (GMR) devices onto standard processed CMOS dies. Microelectronics Journal, 45(6), 702–707.
13. Roldán, A., Roldán, J. B., Reig, C., et al. (2014). An in-depth noise model for giant magnetoresistance current sensors for circuit design and complementary metal-oxide-semiconductor integration. Journal of Applied Physics, 115(17), Article 17E514.
14. Avila-Navarro, E., & Reig, C. (2012). Directive microstrip antennas for specific below-2.45 GHz applications. International Journal of Antennas and Propagation, 2012, Article 612170.
15. Roldán, A. M., Roldán, J. B., Reig, C., et al. (2011). A DC behavioral electrical model for quasi-linear spin-valve devices including thermal effects for circuit simulation. Microelectronics Journal, 42(2), 365–370.
16. Avila-Navarro, E., Anton, J., Blanes, J. M., et al. (2011). Broadband printed dipole with integrated via-hole balun for WiMAX applications. Microwave and Optical Technology Letters, 53(1), 52–55.
17. Cubells-Beltrán, M. D., Reig, C., Martos, J., et al. (2011). Limitations of magnetoresistive current sensors in industrial electronics applications. International Review of Electrical Engineering-IREE, 6(1), 423–429.
18. Roldán, A., Reig, C., Cubells-Beltrán, M. D., et al. (2010). Analytical compact modeling of GMR based current sensors application to power measurement at the IC level. Solid-State Electronics, 54(12), 1606–1612.
19. Avila-Navarro, E., Cayuelas, C., & Reig, C. (2010). Dual-band printed dipole antenna for Wi-Fi 802.11n applications. Electronics Letters, 46(21), 1421–1422.
20. Avila-Navarro, E., Carrasco, J. A., & Reig, C. (2010). Printed dipole antennas for personal communication systems. IETE Technical Review, 27(4), 286–292.
21. Cubells-Beltrán, M. D., Reig, C., Muñoz, D. R., et al. (2009). Full Wheatstone bridge spin-valve based sensors for IC currents monitoring. IEEE Sensors Journal, 9(12), 1756–1762.
22. Reig, C., Cubells-Beltrán, M. D., & Muñoz, D. R. (2009). Magnetic field sensors based on Giant Magnetoresistance (GMR) technology: Applications in electrical current sensing. Sensors, 9(10), 7919–7942.
23. Avila-Navarro, E., Carrasco, J. A., & Reig, C. (2009). Dual printed antenna for Wi-Fi applications. IEEE Antennas and Wireless Propagation Letters, 8, 596–598.

Profile Details

https://www.uv.es/uvweb/college/en/profile-1285950309813.html?p2=candid&idA=
https://www.researchgate.net/profile/Candid-Reig
https://creig.academia.edu/

WOS ResearcherID: B-4253-2008