Gheorghe Asachi Technical University of Iasi (TUIASI), Romania

Email: [email protected]

Qualifications

1998 Ph.D, Gheorghe Asachi Technical University of Iasi, Diploma in Industrial Engineering

1989 M.Sc., Gheorghe Asachi Technical University of Iasi

1983 B.Sc., Costache Negruzzi College Iasi, Mathematics and Physics

Publications(Selected)

1. Zhang, X., Xiao, Z., & Zhou, X., et al. (2024). Dependence of structures and performances of soft-magnetic FeCo-based metal glasses on cryogenic treatments. Journal of Materials Research and Technology, 33, 3492–3500.
2. Ren, B., Li, S., & Wang, N., et al. (2022). Excellent catalytic performance of mechanically alloyed AlCrFeMnTiZr0.5 high-entropy alloy for malachite green degradation. Materials Letters, 328, Article 133076.
3. Fu, W. J., Zheng, W., & Axinte, E., et al. (2020). Tensile deformation mechanism of a bulk metallic glass matrix composite using in situ neutron diffraction. Journal of Non-Crystalline Solids, 546, Article 120250.
4. Niu, Z., Xie, Y., & Axinte, E., et al. (2020). Development and characterization of novel Ni-rich high-entropy alloys. Journal of Alloys and Compounds, 832, Article 154868.
5. Abdul-Rani, A. M., Rao, T., & Axinte, E., et al. (2019). Characterization, adhesion strength and in-vitro cytotoxicity investigation of hydroxyapatite coating synthesized on Zr-based BMG by electro discharge process. Surface and Coatings Technology, 370, 213–226.
6. Aliyu, A. A. A., Abdul-Rani, A. M., & Ginta, T. L., et al. (2019). Synthesis and characterization of bioceramic oxide coating on Zr-Ti-Cu-Ni-Be BMG by electro discharge process. International Scientific-Technical Conference MANUFACTURING, 518–531.
7. Aliyu, A. A., Abdul-Rani, A. M., & Ginta, T. L., et al. (2019). Hydroxyapatite electro discharge coating of Zr-based bulk metallic glass for potential orthopedic application. Key Engineering Materials, 796, 123–128.
8. Ginta, T. L., Rao, T., & Axinte, E. (2019). Hydroxyapatite electro discharge coating of Zr-based bulk metallic glass for potential orthopedic application. Advances on Manufacturing and Material Sciences II, 123–130.
9. Zhai, S., Axinte, E., & Wang, S., et al. (2018). Effects of pre-compression on the microstructure, mechanical properties and corrosion resistance of Cu47.5Zr47.5Al5 bulk metallic glasses. Journal of Non-Crystalline Solids, 481, 383–390.
10. Axinte, E., Wang, Y., & Abdul-Rani, A. M., et al. (2018). An environmental friendly model for materials substitution in a fiberglass reinforced polyester composite. MATEC Web of Conferences, 178, Article 04013.
11. Aliyu, A. A. A., Abdul-Rani, A. M., & Ginta, T. L., et al. (2017). Investigation of nanoporosities fabricated on metallic glass surface by hydroxyapatite mixed EDM for orthopedic application. Malaysian Journal of Fundamental and Applied Sciences, 13(4-2), 523–528.
12. Shang, C., Axinte, E., & Ge, W., et al. (2017). High-entropy alloy coatings with excellent mechanical, corrosion resistance and magnetic properties prepared by mechanical alloying and hot pressing sintering. Surfaces and Interfaces, 9, 36–43.
13. Ge, W., Li, B., & Axinte, E., et al. (2017). Crystallization and corrosion resistance in different aqueous solutions of Zr50.7Ni28Cu9Al12.3 amorphous alloy and its crystallization counterparts. JOM, 69(4), 776–783.
14. Prakash, C., Axinte, E., & Razak, M. A., et al. (2017). A review of additive mixed-electric discharge machining: Current status and future perspectives for surface modification of biomedical implants. Advances in Materials Science and Engineering, 2017, Article 5960107.
15. Abdul-Rani, A. M., Ginta, T. L., & Prakash, C., et al. (2017). A review of additive mixed-electric discharge machining: Current status and future perspectives for surface modification of biomedical implants. Advances in Materials Science and Engineering, 2017, Article 5960107.
16. Axinte, E., Wang, Y., & Bofu, A. (2017). An overview on the conventional and nonconventional methods for manufacturing the metallic glasses. MATEC Web of Conferences, 112, Article 03003.
17. Shang, C., Axinte, E., & Sun, J., et al. (2017). CoCrFeNi(W1−xMox) high-entropy alloy coatings with excellent mechanical properties and corrosion resistance prepared by mechanical alloying and hot pressing sintering. Materials & Design, 117, 193–202.
18. Zhang, Z., Axinte, E., & Ge, W., et al. (2016). Microstructure, mechanical properties and corrosion resistance of CuZrY/Al, Ti, Hf series high-entropy alloys. Materials & Design, 108, 106–113.
19. Xu, J., Axinte, E., & Zhao, Z., et al. (2016). Effect of C and Ce addition on the microstructure and magnetic property of the mechanically alloyed FeSiBAlNi high entropy alloys. Journal of Magnetism and Magnetic Materials, 414, 59–68.
20. Axinte, E., Wang, Y., & Lee, T. L., et al. (2016). Shear banding in metallic glasses: Major weakness or potential advantage? Recent Patents on Materials Science, 9(1), 2–19.

Profile Details

https://www.tcm.cmmi.tuiasi.ro/member/eugen-axinte/
https://scholar.google.com/citations?user=QZLhXbIAAAAJ&hl=en
https://www.researchgate.net/profile/Eugen-Axinte

WOS ResearcherID: C-6963-2011