Biography

Dr. Ramesh Kumar Guduru

Department of Mechanical Engineering
Pandit Deendayal Energy University, India


Email: [email protected];[email protected]

Qualifications

2006  Ph.D., Materials Science and Engineering, NC State University, USA
2002  MS./M.Tech., Metallurgical and Materials Engineering, Indian Institute of Technology Madras, India
2000  BS/BE, Metallurgical Engineering, Indian Institute of Technology, Indiua

Publications
(selected)


  1. Dixit, U., Guduru, R. K., & Rashid, A. (2026). Time-Based Study of Tool Wear in Dry Turning of Ti-6Al-4 V with Coated and Bare WC-Co Tools. Journal of Materials Engineering and Performance, 35(21), 21358–21376.
  2. Sharma, Y., Guduru, R. K., Tripathi, B., et al. (2025). Recycling of anode active material from spent Li-ion batteries. Journal of Energy Storage, 134, Article 118067.
  3. Tiwari, N., Mayya, K. B. K., Guduru, R. K., et al. (2025). Direct air CO2 capture using aqueous ammonia through an experimental investigation using Box-Behnken statistical approach. Chemical Engineering Journal, 521, Article 166358.
  4. Kiruthiga, P., Dave, N., Shahabuddin, S., et al. (2025). Development of sustainable concrete with pulverized coal bottom ash for low cost and carbon emission. Construction and Building Materials, 462, Article 139949.
  5. Jeeru, L. R., Pradhan, N. C., Naveen, P., et al. (2024). Sustainable synthesis of automobile fuel additive from glycerol and acetone and catalyst reusability studies. Chemical Papers, 78(1), 321–329.
  6. Praveen, B. V. S., Pradhan, N. C., Ashok, A., et al. (2023). Production of biodiesel: kinetics and reusability studies of the Mg-Al hydrotalcite catalyst using Jatropha oil. Reaction Chemistry & Engineering, 8(7), 1729–1737.
  7. Thirumal, V., Yuvakkumar, R., Kumar, P. S., et al. (2023). Heterostructured two dimensional materials of MXene and graphene by hydrothermal method for efficient hydrogen production and HER activities. International Journal of Hydrogen Energy, 48(17), 6478–6487.
  8. Varadaraajan, V., Guduru, R. K., & Mohanty, P. S. (2022). Property Evolution in Amorphous Steel Coatings by Different Thermal Spray Processes. Journal of Thermal Spray Technology, 31(4), 1056–1066.
  9. Guduru, R. K., Icaza, J. C., & Pudi, S. K. (2021). Electrochemical characterization of RuO2 and activated carbon (AC) electrodes using multivalent Ni(NO3)2 electrolyte for charge storage applications. Journal of Energy Storage, 34, Article 102170.
  10. Suriapparao, D. V., Yerrayya, A., Nagababu, G., et al. (2020). Recovery of renewable aromatic and aliphatic hydrocarbon resources from microwave pyrolysis/co-pyrolysis of agro-residues and plastics wastes. Bioresource Technology, 318, Article 124277.
  11. Rani, B. J., Yuvakkumar, R., Ravi, G., et al. (2020). Electrochemical water splitting exploration of MnCo2O4, NiCo2O4 cobaltites. New Journal of Chemistry, 44(41), 17679–17692.
  12. Saravanakumar, B., Ravi, G., Guduru, R. K., et al. (2020). Facile hydrothermal synthesis of CuCo2O4/AC/PANI nanocomposites. Journal of Sol-Gel Science and Technology, 94(2), 241–250.
  13. Saravanakumar, B., Ramachandran, S. P., Ravi, G., et al. (2020). MnFe2O4 Nanoparticles as an Efficient Electrode for Energy Storage Applications. Journal of Nanoscience and Nanotechnology, 20(1), 96–105.
  14. Rani, B. J., Praveenkumar, M., Ravichandran, S., et al. (2019). BiVO4 Nanostructures for Photoelectrochemical (PEC) Solar Water Splitting Applications. Journal of Nanoscience and Nanotechnology, 19(11), 7427–7435.
  15. Rani, B. J., Kumar, M. P., Ravichandran, S., et al. (2019). WO3 nanocubes for photoelectrochemical water-splitting applications. Journal of Physics and Chemistry of Solids, 134, 149–156.
  16. Saravanakumar, B., Ramachandran, S. P., Ravi, G., et al. (2019). Electrochemical performances of monodispersed spherical CuFe2O4 nanoparticles for pseudocapacitive applications. Vacuum, 168, Article 108798.
  17. Rani, B. J., Praveenkumar, M., Ravichandran, S., et al. (2019). Ultrafine M-doped TiO2 (M = Fe, Ce, La) nanosphere photoanodes for photoelectrochemical water-splitting applications. Materials Characterization, 152, 188–203.
  18. Saravanakumar, B., Ravi, G., Yuvakkumar, R., et al. (2019). Synthesis of polyoxometalates, copper molybdate (Cu3Mo2O9) nanopowders, for energy storage applications. Materials Science in Semiconductor Processing, 93, 164–172.
  19. Rani, B. J., Kumar, M. P., Ravi, G., et al. (2019). Electrochemical and photoelectrochemical water oxidation of solvothermally synthesized Zr-doped α-Fe2O3 nanostructures. Applied Surface Science, 471, 733–744.
  20. Oruji, S., Brake, N. A., Guduru, R. K., et al. (2019). Mitigation of ASR expansion in concrete using ultra-fine coal bottom ash. Construction and Building Materials, 202, 814–824.



Profile Details
https://www.upes.ac.in/faculty/school-of-advanced-engineering/mechanical/ramesh-kumar
https://www.lamar.edu/engineering/_files/documents/mechanical/Curriculum%20Vitae_Ramesh%20K%20Guduru.pdf

WOS ResearcherID: N-8541-2016

SCIRP Newsletter
Copyright © 2006-2026 Scientific Research Publishing Inc. All Rights Reserved.
Top