Prof. Terry L. Alford

School for Engineering of Matter
Arizona State University, USA

Email: [email protected]

Qualifications

1991 Ph.D., Materials Science, Cornell University, USA

Publications (Selected)

1. Manahile, M., Kashyap, A., Hsu, S. C., et al. (2025). Diamond Schottky diode arrays on large area 2 x 2 mosaic tile substrates. Diamond and Related Materials, 160, Article 113039.
2. Zhu, Y. Z., Ravishekar, R., Tang, T. T., et al. (2023). Characterization of PEDOT:PSS nanofilms printed via electrically assisted direct ink deposition with ultrasonic vibrations. Molecules, 28(20), Article 7109.
3. Gogoi, B., Gockley, C., Venu, S., et al. (2023). Ultrafast and large-scale fabrication of PEDOT:PSS nanofilms using electrical-field-assisted direct ink deposition. Molecules, 28(16), Article 5989.
4. Amonoo, E., Jha, V., Thornton, T., et al. (2023). Ohmic contacts to nitrogen-doped nanocarbon layers on diamond (100) surfaces. Diamond and Related Materials, 135, Article 109832.
5. Gogoi, B., Yerramilli, A., Luboowa, K. M., et al. (2022). Fabrication of triple cation perovskite solar cells using different post-spin coating anti-solvent treatments. Journal of Materials Science: Materials in Electronics, 33(26), 21161–21171.
6. Gogoi, B., Yerramilli, A., Luboowa, K. M., et al. (2022). Understanding the crystallization of triple-cation perovskites assisted by mixed antisolvents for improved solar cell device performance. Journal of Materials Science: Materials in Electronics, 33(7), 4415–4425.
7. Sanni, D. M., Yerramilli, A. S., Ntsoenzok, E., et al. (2021). Impact of precursor concentration on the properties of perovskite solar cells obtained from the dehydrated lead acetate precursors. Journal of Vacuum Science & Technology A, 39(3), Article 032801.
8. Yerramilli, A. S., Chen, Y. Q., & Alford, T. L. (2021). Passivation of triple cation perovskites using guanidinium iodide in inverted solar cells for improved open-circuit voltage and stability. Sustainable Energy & Fuels, 5(9), 2486–2493.
9. Yerramilli, A. S., Chen, Y. Q., Gogoi, B., et al. (2021). Phenyl Ethylammonium Iodide introduction into inverted triple cation perovskite solar cells for improved VOC and stability. Organic Electronics, 93, Article 106121.
10. Chen, Y. Q., Chu, J. Y., Li, L. W., et al. (2021). Improved photostability of inverted-structure perovskite solar cells with high power conversion efficiency by inserting CuI between PEDOT and MAPbI3 layers. Journal of Materials Science: Materials in Electronics, 32(10), 12929–12938.
11. Khan, H., Yerramilli, A. S., D'Oliveira, A., et al. (2020). Experimental methods in chemical engineering: X-ray diffraction spectroscopy-XRD. Canadian Journal of Chemical Engineering, 98(6), 1255–1266.
12. Li, Y., Li, L. W., Yerramilli, A. S., et al. (2019). Enhanced power conversion efficiency and preferential orientation of the MAPbI3 perovskite solar cells by introduction of urea as additive. Organic Electronics, 73, 130–136.
13. Yerramilli, A. S., Chen, Y. Q., Knight, A., et al. (2019). Improved performance of inverted perovskite solar cells due to the incorporation of zirconium acetylacetonate buffer layer. Solar Energy Materials and Solar Cells, 200, Article 109927.
14. Yerramilli, A. S., Chen, Y. Q., & Alford, T. L. (2019). Effect of excessive Pb on the stability and performance of Pb-halide perovskite solar cells against photo-induced degradation. MRS Communications, 9(1), 189–193.
15. Chen, Y. Q., Li, L. W., Yerramilli, A. S., et al. (2019). Introduction of nitrogen gas flow and precursor aging process to improve the efficiency of the lead acetate derived CH3NH3PbI3 perovskite solar cells. Solar Energy Materials and Solar Cells, 190, 49–56.
16. Chen, Y. Q., Qu, W. W., Bian, W. B., et al. (2018). Development of low-fluorine solution route and UV photolysis process for YBa2Cu3O7-x coated conductors. MRS Communications, 8(3), 1037–1042.
17. Song, Y., Li, L. W., Chen, Y. Q., et al. (2018). Fabrication of PZT/CuO composite films and their photovoltaic properties. Journal of Sol-Gel Science and Technology, 87(2), 285–291.
18. Yerramilli, A. S., Chen, Y. Q., Sanni, D., et al. (2018). Impact of excess lead on the stability and photo-induced degradation of lead halide perovskite solar cells. Organic Electronics, 59, 107–112.
19. Chen, Y. Q., Yerramilli, A. S., Li, L. W., et al. (2018). Control of the nucleation and growth of the lead acetate solution derived CH3NH3PbI3 films leads to enhanced power conversion efficiency. ACS Applied Energy Materials, 1(6), 2898–2906.
20. Zhao, Z., & Alford, T. L. (2018). The effect of hole transfer layers and anodes on indium-free TiO2/Ag/TiO2 electrode and ITO electrode based P3HT:PCBM organic solar cells. Solar Energy Materials and Solar Cells, 176, 324–330.
21. Chen, Y. Q., Yerramilli, A., Shen, Y. X., et al. (2018). Effect of excessive Pb content in the precursor solutions on the properties of the lead acetate derived CH3NH3PbI3 perovskite solar cells. Solar Energy Materials and Solar Cells, 174, 478–484.
22. Chen, Y. Q., Li, L. W., Yin, X. R., et al. (2017). Resistive switching characteristics of flexible TiO2 thin film fabricated by deep ultraviolet photochemical solution method. IEEE Electron Device Letters, 38(11), 1528–1531.

Profile Details
https://search.asu.edu/profile/4633
https://asu.elsevierpure.com/en/persons/terry-alford/
https://www.researchgate.net/scientific-contributions/Terry-L-Alford-2057929479

WOS ResearcherID: EKA-2131-2022