Biography

Prof. Giulio Lorenzini

Department of Industrial Engineering

University of Parma, Italy

Professor


Email: [email protected]


Qualifications

1999 Ph.D., Nuclear Engineering, Alma Mater Studiorum-University of Bologna, Italy

1994 M.Sc., Nuclear Engineering, Alma Mater Studiorum-University of Bologna, Italy


Publications (Selected)

  1. Reyes, Z. C., Vivas, G. A. V., Brum, R. D., et al. (2026). Influence of the diameter of the cylindrical phase change material on the performance of the Earth-Air Heat Exchanger. Thermal Science and Engineering Progress, 77, Article 104863.
  2. Kumar, P. V., Jyothsna, K., Ibrahim, S. M., et al. (2025). Modeling and Analysis of Magneto-Hydrodynamic Sisko Nanofluid Flow over a Nonlinearly Stretchable Porous Sheet with Thermal Radiation. Journal of Engineering Thermophysics, 34(4), 793-810.
  3. Mondal, R. N., Bhowmick, R., Hussen, S., et al. (2025). Vortex Structure and Instability Characteristics of Dean-Taylor Flow through a Rotating Bent Square-Shaped Enclosure. Journal of Engineering Thermophysics, 34(4), 882-912.
  4. Kumar, P. V., Ibrahim, S. M., Jyothsna, K., et al. (2025). Impact of Thermal Radiation on Blood Flow Temperature Dynamics in a Constricted Artery System with Multi Slips Conditions. Journal of Engineering Thermophysics, 34(3), 580-600.
  5. Mahabaleshwar, U. S., Bognar, G. V., Vishalakshi, A. B., et al. (2025). Thermal Buoyancy and Radiation Effects on Nanofluid Flow over Shrinking/Stretching Porous Surface. Journal of Engineering Thermophysics, 34(2), 451-464.
  6. Benouaz, M. R., Kandouci, H., Alkhafaji, M. A., et al. (2025). Flow characteristics in heated trapezoidal channels: A finite element method study of Reynolds number and fin design influences. AIP Advances, 15(1), Article 015002.
  7. Sachin, G. M., Maranna, T., Mahabaleshwar, U. S., et al. (2024). Insights into Significance of Radiative Inclined MHD on Mixed Convective Viscoelastic Flow of Hybrid Nanofluid over a Permeable Surface with Mass Transpiration. Journal of Engineering Thermophysics, 33(4), 883-900.
  8. Mahabaleshwar, U. S., Sachhin, S. M., Perez, L. M., et al. (2024). An Effect of Mass Transpiration and Darcy-Brinkman Model on Ostwald-de Waele Ternary Nanofluid. Journal of Engineering Thermophysics, 33(3), 547-565.
  9. Jena, S., Swain, K., Ibrahim, S. M., et al. (2024). Three-Dimensional MHD Rotating flow of Radiative Nanofluid over a Stretched Sheet with Homogeneous-Heterogeneous Chemical Reactions. Journal of Engineering Thermophysics, 33(2), 336-353.
  10. John, A. S., Mahanthesh, B., & Lorenzini, G. (2024). Study of hybrid nanofluid flow in a stationary cone-disk system with temperature-dependent fluid properties. Applied Mathematics and Mechanics-English Edition, 45(4), 677-694.
  11. Leao, M. R., Lorenzini, G., Claudino, T. M., et al. (2024). Numerical Study and Geometrical Investigation of an Inclined Passive Wall Solar Chimney over the Ventilation Performance of an Attached Room. Journal of Engineering Thermophysics, 33(1), 73-94.
  12. Tamanna, M. N., Ferdows, M., Lorenzini, G., et al. (2024). Numerical Investigation of Heat Transfer Enhancement on Tangent Hyperbolic Fluid over a Stretching Sheet with an Inclined Magnetic Field Filled with Hybrid Nanofluids. Journal of Engineering Thermophysics, 33(1), 55-72.
  13. Lage, J. L., Worek, W. M., Amon, C. H., et al. (2023). Professor Adrian Bejan on his 75th birthday. International Communications in Heat and Mass Transfer, 149, Article 107162.
  14. Bahmani, M. H., Shayan, M. E., & Lorenzini, G. (2023). A Novel Method Based on a Non-Stationary Discrete Markov Chain for Tracking Variations in the Quantity of Reserved Energy and the Number of Electric Vehicles. Journal of Engineering Thermophysics, 32(4), 758-775.
  15. Adhikari, S. C., Hasan, M. S., Rouf, R. A., et al. (2023). A computational modeling on two-dimensional laminar flow and thermal characteristics through a strongly bent square channel. AIP Advances, 13(11), Article 115007.
  16. Caetano, N. R., da Silva, B. P., Ruoso, A. C., et al. (2023). Energy Recovery Based on Exhaust Gas Recirculation and Heat Regeneration Processes Applied in a Firewood Boiler. Journal of Engineering Thermophysics, 32(3), 482-501.
  17. Shayan, M. E., Najafi, G., & Lorenzini, G. (2023). Optimization of a dual fuel engine based on multi-criteria decision-making methods. Thermal Science and Engineering Progress, 44, Article 102055.
  18. Teixeira, F. B., Lorenzini, G., Isoldi, L. A., et al. (2023). Geometric Evaluation of Bluff Bodies Arrangement under Turbulent Flows with Mixed Convection Heat Transfer. Journal of Engineering Thermophysics, 32(2), 279-311.
  19. Jayalakshmi, P., Obulesu, M., Ganteda, C. K., et al. (2023). Heat Transfer Analysis of Sisko Fluid Flow over a Stretching Sheet in a Conducting Field with Newtonian Heating and Constant Heat Flux. Energies, 16(7), Article 3183.
  20. Kumar, P. V., Sunitha, C., Ibrahim, S. M., et al. (2023). Outlining the Slip Effects on MHD Casson Nanofluid Flow over a Permeable Stretching Sheet in the Existence of Variable Wall Thickness. Journal of Engineering Thermophysics, 32(1), 69-88.
  21. Chen, L., & Lorenzini, G. (2023). Heating load, COP and exergetic efficiency optimizations for TEG-TEH combined thermoelectric device with Thomson effect and external heat transfer. Energy, 270, Article 126824.
  22. Hassoun, Z. S., Aliane, K., Zhao, Y. H., et al. (2023). Effect of obstacles on turbulent flows in a rectangular channel from their front sides. Thermal Science, 27(SI), S333-S341.
  23. Rebhi, R., Ahmad, H., Zhao, Y. H., et al. (2023). Numerical assessment of an air-heat exchanger channel with staggered attached rectangular baffles and in-line detached square fins. Thermal Science, 27(SI), S343-S351.
  24. Zehisaadat, S., Khalajzadeh, R. K., Hajmohammadi, M. R., et al. (2022). Geometric Optimization of T-shaped Fin and Inverted Fin Based on Minimum Entropy Generation Objective. Journal of Engineering Thermophysics, 31(4), 668-687.
  25. Debbab, M., Ghellai, N., Ikumapayi, O. M., et al. (2022). Behavior Study of Annealing Temperature on Microstructure and Wettability of Electrodeposited ZnO Thin Films for Microcapacitor Application. Journal of New Materials for Electrochemical Systems, 25(4), 293-300.


Profile Details
https://personale.unipr.it/en/ugovdocenti/person/99784
https://www.researchgate.net/scientific-contributions/Giulio-Lorenzini-2142271246
https://www.sciencedirect.com/author/7006370499/giulio-lorenzini

WOS ResearcherID: MKB-1930-2025

SCIRP Newsletter
Copyright © 2006-2026 Scientific Research Publishing Inc. All Rights Reserved.
Top