Dr. Bin Tang

China Academy of Engineering Physics, China

Professor

Email: [email protected]

Qualifications

2008–2010 Ph.D., Department of Micro/nano Systems Engineering, Nagoya University, Japan

2005–2008 M.Sc., Department of Opto-electronic Engineering, Chongqing University, China

2001-2005 B.Sc., Department of Opto-electronic Engineering, Chongqing University, China

Publications (selected)

1. Wang, D., Yang, M., Wang, F. and Tang, B. Design and simulation of stator for multi legged miniature linear ultrasonic motor. Optics and Precision Engineering, 2024.

2. Abbas, Z., Wang, D., Lu, L. and Tang, B. Computational Study of Drop-on-Demand Coaxial Electrohydrodynamic Jet and Printing Microdroplets. Micromachines, 2023.
3. Tao, Q. and Tang, B. A High-Linearity Closed-Loop Capacitive Micro-Accelerometer Based on Ring-Diode Capacitance Detection. Sensors, 2023.
4. Wang, D., Abbas, Z., Lu, L. and Liang, J. Simulation of Cone-Jet and Micro-Drip Regimes and Printing of Micro-Scale Patterns on PET Substrate. Polymers, 2022.
5. Lyu, M., Zhao, J., Kacem, N. and Huang, Y. Computational investigation of high-order mode localization in electrostatically coupled microbeams with distributed electrodes for high sensitivity mass sensing. Mechanical Systems and Signal Processing, 2021.
6. Lyu, M., Zhao, J., Kacem, N. and Huang, Y. Design and Modeling of a MEMS Accelerometer Based on Coupled Mode-Localized Nonlinear Resonators Under Electrostatic Actuation. Communications in Nonlinear Science and Numerical Simulation, 2021.
7. Wang, Y., Zhi, C., Tang, B. and Wang, X. A Micro Electromagnetic Actuator with high force density. Sensors and Actuators A Physical, 2021.
8. Dai, J., Bu, Y., Xie, J. and Gao, M. Design and Fabrication of a Metal-Silicon Actuator With Low Voltage, Low Power Consumption and Large Displacement. Journal of Microelectromechanical Systems, 2021.
9. Mo, Y., Yang, J., Peng, B. and Tang, B. Design and verification of a structure for isolating stress in sandwich MEMS accelerometer. Microsystem Technologies, 2021.
10. Zhi, C., Qu, M., Wang, Y. and Tang, B. Fabrication and characterization of micro electromagnetic linear actuators. Journal of Micromechanics and Microengineering, 2020.
11. Wang, Y., Zhao, J., Xia, Y. and Tang, B. An isogeometric analysis based design of highly sensitive and precise omnidirectional piezoelectric-fiber accelerometer. Journal of Intelligent Material Systems and Structures, 2020.
12. Xu, B., Wang, C., Ma, J. and Liu, K. A rapid resistance measurement system for quartz pendulums. Review of Scientific Instruments, 2020.
13. Zhao, K., Wang, D., Wang, Z. and Liang, J. Fabrication of piezoelectric thick-film stator using electrohydrodynamic jet printing for micro rotary ultrasonic motors. Ceramics International, 2020.
14. He, X., Ge, C., Zheng, X. and Xu, Y. Rapid identification of alpha-fetoprotein in serum by a microfluidic SERS chip integrated with Ag/Au Nanocomposites. Sensors and Actuators B Chemical, 2020.
15. Lyu, M., Zhao, J., Kacem, N. and Huang, Y. Exploiting nonlinearity to enhance the sensitivity of mode-localized mass sensor based on electrostatically coupled MEMS resonators. International Journal of Non-Linear Mechanics, 2020.
16. Xiong, Z., Wang, C., Zhang, F. and Tang, B. A Low-g MEMS Inertial Switch Based on Direct Contact Sensing Method. IEEE Transactions on Components, Packaging, and Manufacturing Technology, 2019.
17. Dong, X., Huang, Q., Xu, W. and En, Y. Research on Temperature Characteristic of Parasitic Capacitance in MEMS Capacitive Accelerometer. Sensors and Actuators A Physical, 2018.
18. Yin, Q., Xu, B., Yin, G. and Tang, B. Surface Profile Measurement and Error Compensation of Triangular Microstructures Employing a Stylus Scanning System. Journal of Nanomaterials, 2018.

Personal Details

https://www.sciencedirect.com/author/57226114882/bin-tang

https://www.researchgate.net/profile/Bin-Tang-20

WoS Researcher ID: IHJ-8764-2023