Prof. Duyi Ye

Zhejiang University, China

Professor

Email: [email protected]

Qualifications

1996 Ph.D., Northeastern University, Mechanical Engineering

1989 M.S.E., Northeastern University, Mechanical Engineering

1986 B.S.E., Nanjing Institute of Technology, Mechanical Engineering

Publications (Selected)

1. Peng, B., Zhang, M., Ye, D* (2022). DIC/DSI based studies on the local mechanical behaviors of HR3C/T92 dissimilar welded joint during plastic deformation, Materials Science & Engineering A 857:144073
2. Peng, B., Ye, D* (2022). Assessing the Residual Stresses in Dissimilar Welded Joint: Depth-Sensing Indentation Testing and Numerical Simulation, Metals and Materials International 28(11):2798-2810
3. Chen C., Ye, D*., Zhang L., Liu J.(2018) DIC-based studies of the overloading effects on the fatigue crack propagation behavior of Ti-6Al-4V ELI alloy, International Journal of Fatigue 112:153-164
4. Xu H., Ye, D*, Mei L. (2017). A study of the back stress and the friction stress behaviors of Ti-6Al-4V alloy during low cycle fatigue at room temperature, Materials Science & Engineering A 700530-539
5. Chen C., Ye, D*., Zhang L., Liu J.(2016). Effects of tensile/compressive overloads on fatigue crack growth behavior of an extra-low-interstitial titanium alloy,  International Journal of Mechanical Science 118（2016）55-66
6. Ye, D*., Haifeng Xu, Xianfeng Feng, Yuandong Xu, Lei Xiao (2016), Depth-sensing indentation-based studies of surface mechanical behavior and fatigue damage evolution of an austenitic stainless steel subjected to cyclic straining, Materials Science and Engineering-A 650 (2016): 38-51
7. Hao H., Ye, D*, Yingzhen Chen, Mi Feng, Jianzhong Liu (2015), A study on the mean stress relaxation behavior of 2124-T851 aluminum alloy during low-cycle fatigue at different strain ratios, Materials & Design, 67(15) 272-279
8. Xiao L., Ye, D*., Chen C.(2014), A further study on representative models for calculating the residual stress based on the instrumented indentation technique, Computational Materials Science, 82: 476–482
9. Hao H., Ye, D*., Chen C. (2014), Strain ratio effects on low-cycle fatigue behavior and deformation microstructure of 2124-T851 aluminum alloy, Material Science and Engineering-A, 605: 151-159.
10. Xiao L., Ye, D*., Chen C., Liu J., Zhang L. (2014), Instrumented indentation measurements of residual stresses around a crack tip under single tensile overloads, International Journal of Mechanical Science, 78: 44-51
11. Ye, D*., Mi F., Liu J., Xu Y., Chen Y., Xiao L. (2013), Use of instrumented indentation testing to study local mechanical properties of 304L SS welded joints subjected to low-cycle fatigue loadings，Material Science and Engineering-A, 564: 76-84
12. Ye, D*., Cha H., Xiao L., Xu Y. (2012). A study of fatigue mesoscopic elasto-plastic properties of a nickel-base superalloy by instrumented microindentation measurements，Journal of Nuclear Materials 420:525–536
13. Ye, D*., Xiao L., Cha H., Xu P., Xu Y. (2011). Use of instrumented micro-indentation to study the mesoscopic elasto-plastic behavior of GH4145/SQ superalloy during high-temperature cyclic straining，Material Science and Engineering-A, 528,6825-6837.
14. Ye D., Xu X., Xiao L., Cha H. (2010). Effects of low-cycle fatigue on static mechanical properties, microstructures and fracture behavior of 304 stainless steel，Material Science and Engineering-A, 456,120-129.
15. Ye, D., Hertel, O. and Vormwald, M. (2008): A unified expression of elastic-plastic notch stress-strain calculation in bodies subjected to multiaxial cyclic loading. International Journal of Solids and Structures, 45, 6177-6189.
16. Ye, D., Zheng, J. (2008): A Model for the Determination of Residual Fatigue-Life of a Nickel-Based. ASME-Journal of Engineering Materials and Technology 130, 031010 1-8.
17. Ye, D., Zheng, J. (2008): High temperature low-cycle fatigue, deformation microstructure and final fracture behavior of a nickel-base superalloy. Key Engineering Materials 378-379, 249-270.
18. Ye, D., Matsuoka, S. and Nagashima, N. (2007): Determination of fatigue mesoscopic mechanical properties of an austenitic stainless steel using depth-sensing indentation (DSI) technique. Material Science and Engineering-A, 456,120-129.
19. Ye, D., Matsuoka, S., Nagashima, N. and Suzuki, N. (2006): The Low cycle fatigue, deformation and final fracture behaviour of an austenitic stainless steel. Material Science and Engineering-A, 415/1-2,104-117.
20. Ye, D. (2005), Effect of cyclic straining at elevated-temperature on static mechanical properties, microstructures and fracture behaviour of nickel-based superalloy GH4145/SQ. International Journal of Fatigue 27/9,1102-1114.
21. Ye, D., Matsuoka S., Nagashima, N. and Suzuki, N. (2005): Multi-scale deformation behaviour investigation of 18Cr-8Ni stainless steel subjected to low-cycle fatigue loading. Materials Characterization 55/2,106-117.
22. Ye, D. (2005). Investigation of cyclic deformation behaviour in the surface layer of 18Cr-8Ni austenitic stainless steel based on Vickers microhardness measurement, Materials Chemistry and Physics 93/2-3, 495-503.
23. Ye, D., Wang, Z. and Yin, X. (2005): An investigation of the effect of high-temperature cyclic straining and creep loading on tensile mechanical properties of GH4145/SQ alloy. Journal of Materials Science 40,483-494.
24. Ye, D., Matsuoka, S., Suzuki, N. and Maeda, Y. (2004): Further investigation of Neuber’s rule and the equivalent strain energy density (ESED) method,International Journal of Fatigue 26: 447-455.
25. Ye, D., Ping Dehai, Wang, Z., Xu, H., Mei, X., etal (2004): Low cycle fatigue behavior of nickel-based superalloy GH4145/SQ at elevated temperature.Material Science and Engineering-A 373: 54-64.

Profile Details

http://www.fe.zju.edu.cn/feen/2019/0801/c33727a1353215/page.htm